RC switch with Relay (605092), US $9.99 – Picture 0

RC switch with Relay (605092), US $9.99 – Picture 1

RC switch with Relay (605092), US $9.99 – Picture 2

RC switch with Relay (605092), US $9.99 – Picture 3

Rc Switch With Relay (605092)

US $9.99

Winfield, Kansas, United States
Jun 9th

Open on mobile:
QR code

This RC relay enables easy control of large, electrically isolated loads in radio control (RC) systems. The activation threshold and direction are configurable, and a safe-start feature reduces the likelihood of unexpected activation. This assembled version ships with the 5V relay, terminal block, and straight male header pins soldered in, so it can be integrated into hobby RC systems without the need for additional soldering. The included power relay is an Omron G5LE-14-DC5 and is rated for up to 10A under most conditions.The RC switch measures the width of incoming RC pulses and compares it to a user-configurable threshold (with ±64µs of hysteresis) to decide whether to turn on the MOSFET. By default, the threshold is approximately 1700µs, with switch activation occurring above the threshold (longer pulses), but the switch has a learning mode that allows you to change the threshold and the activation direction. A safe-start feature reduces the likelihood of unexpected activation. We generally recommend using a 4- or 5-cell NiMH or NiCD battery pack to power the switch. The battery pack will typically be connected to an RC receiver or servo controller, which passes the power on to the RC switch. The board has four mounting holes that work with #2 or M2 screws (not included). This switch includes a 5V Omron relay, header pins, and terminal block soldered in. A 1x2-pin male header and a shorting block are also included and can be used to configure the device. This unit can be incorporated into an existing RC system without the need for any additional soldering. Detailed Specifications Max Relay Current: 10A Dimensions: 1” x 1.35” x 0.9” Weight: 17g (0.60oz) Outputs and indicator LED The RC switch provides feedback about what state it is in via a yellow indicator LED. Status information is also provided on two output pins: - The GOOD pin indicates the presence of a valid RC signal (10-330 Hz pulse rate, 0.5-2.5 ms pulse width). - The OUT pin indicates whether the relay is activated (i.e. the relay coil is energized). The switch with relay connected to a receiver and battery (not included).

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Pololu
MPN	2804