+ Post new Ad
Rectus K3-87113/90 water fittings 300 series 1/2" ID Hose Barb 3/8" body, US $5.00 – Picture 0
Rectus K3-87113/90 water fittings 300 series 1/2" ID Hose Barb 3/8" body, US $5.00 – Picture 1
Rectus K3-87113/90 water fittings 300 series 1/2" ID Hose Barb 3/8" body, US $5.00 – Picture 0
Rectus K3-87113/90 water fittings 300 series 1/2" ID Hose Barb 3/8" body, US $5.00 – Picture 1

Rectus K3-87113/90 Water Fittings 300 Series 1/2" Id Hose Barb 3/8" Body

US $5.00

  • Webster, New York, United States
  • Jan 30th
Open on mobile:
QR code
The 86, 87 and 88 RECTUS Moldtite coupling series were  especially developed for connecting coolant lines and injection molds. Countersunk plugs can easily be connected and disconnected because of the extended sleeve. The angular connections prevent kinks from forming in the hose. Advantages Available in single shut-off, double shut-off or straight-through versions. The shut-off couplings (with valve) are equipped with nickel plated sleeves for quick and accurate  visual differentiation. Working Pressure PB = 15 bar, maximum static working pressure with safety factor of 4 to 1. Working Temperature* -15°C up to +200°C (FKM) depending on the medium. *At a temperature below -15°C and above +200°C special seals are available on request. New Rectus fittings with 3/8" body and 1/2" hose barb 90 degree as shown Posted with eBay Mobile
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Model Moldtite 300 Series 87
Brand Rectus
Country of Manufacture United States
MPN K3-87113/90

Directions

Similar products from Molds, Forms & Ejection Pins

DME Plate Extension Bushings TEB 0009

DME Plate Extension Bushings TEB 0009

  • Fort Wayne, Indiana, United States
  • Jan 30th
Rubber Idler Roller 29" Wide 5" Diameter 1.25" Shaft

Rubber Idler Roller 29" Wide 5" Diameter 1.25" Shaft

  • Osseo, Minnesota, United States
  • Jan 30th
Set Of (3) Spin-N-Seal Drum

Set Of (3) Spin-N-Seal Drum

  • Hialeah, Florida, United States
  • Jan 30th
BANSHEE MOLD TEMPERATURE CONTROLLER PARTS METERS / POWER MODULE / POTS / MODULES

BANSHEE MOLD TEMPERATURE CONTROLLER PARTS METERS / POWER MODULE / POTS / MODULES

  • Sabina, Ohio, United States
  • Jan 30th
16" Cloeren R/LD-75 Sheet Extrusion Die

16" Cloeren R/LD-75 Sheet Extrusion Die

  • United States
  • Jan 30th
QC-10 Aluminum MUD Inserts 08/10 SSU 227 Injection mold prototype DME

QC-10 Aluminum MUD Inserts 08/10 SSU 227 Injection mold prototype DME

  • Hamilton, Ohio, United States
  • Jan 30th
DME D-M-E- MOLD DATING INSERTS INJECTION MOLD NATIONAL MOLD HASCO MOLD

DME D-M-E- MOLD DATING INSERTS INJECTION MOLD NATIONAL MOLD HASCO MOLD

  • Etobicoke, Ontario, Canada
  • Jan 30th
NEW PLASTIC PROFILE EXTRUSION TOOLING with STARTUP ASSISTANCE

NEW PLASTIC PROFILE EXTRUSION TOOLING with STARTUP ASSISTANCE

  • Holyoke, Massachusetts, United States
  • Jan 30th
D.M.E EX150S 7/32'' LOT OF 4

D.M.E EX150S 7/32'' LOT OF 4

  • New Paris, Indiana, United States
  • Jan 30th
INJECTION MOLD DIE RESISTANCE ELECTRIC HEATING ELEMENTS

INJECTION MOLD DIE RESISTANCE ELECTRIC HEATING ELEMENTS

  • Clermont, Georgia, United States
  • Jan 30th
Box of (1175) Belletech White Glass Door Holder Injection Molds 73321-SW3-0000

Box of (1175) Belletech White Glass Door Holder Injection Molds 73321-SW3-0000

  • United States
  • Jan 30th
Injection Mold Base 10 x 10 7075 aluminum prototype plastic polymer

Injection Mold Base 10 x 10 7075 aluminum prototype plastic polymer

  • Hamilton, Ohio, United States
  • Jan 30th
Plastic Injection Mold- Rebar holders- 3 seperate molds- Multi-cavity

Plastic Injection Mold- Rebar holders- 3 seperate molds- Multi-cavity

  • Vicksburg, Michigan, United States
  • Jan 30th
DME Accelerated Ejector New D-M-E,Mold,Die part AEB-10 Bumper Type

DME Accelerated Ejector New D-M-E,Mold,Die part AEB-10 Bumper Type

  • Maumee, Ohio, United States
  • Jan 30th
PCS Company New Mold Locks PA-200,DME Type

PCS Company New Mold Locks PA-200,DME Type

  • Maumee, Ohio, United States
  • Jan 30th
DME Accelerated Ejector New D-M-E,Mold,Die part AEP-20 Pin Type

DME Accelerated Ejector New D-M-E,Mold,Die part AEP-20 Pin Type

  • Maumee, Ohio, United States
  • Jan 30th
PCS Company New Mold Locks PA-150,DME Type

PCS Company New Mold Locks PA-150,DME Type

  • Maumee, Ohio, United States
  • Jan 30th
DME Accelerated Ejector New D-M-E,Mold,Die part AEP-10 Pin Type

DME Accelerated Ejector New D-M-E,Mold,Die part AEP-10 Pin Type

  • Maumee, Ohio, United States
  • Jan 30th
Advantage Negative Pressure Unit, "Logic Seal" Model: TR-300

Advantage Negative Pressure Unit, "Logic Seal" Model: TR-300

  • Scottsburg, Indiana, United States
  • Jan 30th
Silicone Mold Release, 16 oz, 3 can Lot

Silicone Mold Release, 16 oz, 3 can Lot

  • East Brunswick, New Jersey, United States
  • Jan 30th

People who viewed this item also vieved

Digital input modul Mat. Nr. 22860007, 3DI486.6, Battenfeld spares

Digital input modul Mat. Nr. 22860007, 3DI486.6, Battenfeld spares

  • Pegnitz, Germany
  • May 22nd
AUTOLOADER FOR PLASTIC INJECTION MOLDING MACHINE

AUTOLOADER FOR PLASTIC INJECTION MOLDING MACHINE

  • Joliet, Illinois, United States
  • May 23rd
AUTOJECTORS WDHS35-S 35 TON PLASTIC INJECTION MOLDING MACHINE

AUTOJECTORS WDHS35-S 35 TON PLASTIC INJECTION MOLDING MACHINE

  • Joliet, Illinois, United States
  • May 23rd
Impco\GMG B30-R180 Blow Molding Machine

Impco\GMG B30-R180 Blow Molding Machine

  • Miami, Florida, United States
  • May 24th
9.5mm x 200mm AC220V 550W Power Cartridge Heater Heating Element

9.5mm x 200mm AC220V 550W Power Cartridge Heater Heating Element

  • Hong Kong, Hong Kong
  • May 24th
Stratasys uPrint SE Plus 3D Printer

Stratasys uPrint SE Plus 3D Printer

  • Los Altos, California, United States
  • May 26th
elstein fsr 650W 220/230 infrared heating element

elstein fsr 650W 220/230 infrared heating element

  • Москва, default, Russian Federation
  • May 26th
elstein T-HTS/1 600W 230v infrared heating element

elstein T-HTS/1 600W 230v infrared heating element

  • Москва, default, Russian Federation
  • May 26th
Glasscraft indy fiberglass chopper system

Glasscraft indy fiberglass chopper system

  • Vega, Texas, United States
  • May 26th
AEC ADP5 VACUUM PUMP--INDUSTRIAL MANUFACTURING

AEC ADP5 VACUUM PUMP--INDUSTRIAL MANUFACTURING

  • Centralia, Illinois, United States
  • May 26th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies