+ Post new Ad
REID, SURFACE GRINDER, ROLLERWAY, GOOD SPINDLE, ELECTRO MAG. CHUCK, FINE POLE, US $12000 – Picture 0
REID, SURFACE GRINDER, ROLLERWAY, GOOD SPINDLE, ELECTRO MAG. CHUCK, FINE POLE, US $12000 – Picture 0

Reid, Surface Grinder, Rollerway, Good Spindle, Electro Mag. Chuck, Fine Pole

US $12000

  • Macomb, Michigan, United States
  • May 29th
Open on mobile:
QR code
REID HAND FEED SURFACE GRINDER ROLLERWAY MODEL  1026 SN 20108 . WALKER ELECTRO MAG. CHUCK, LBP SERIES, LONGITUDINAL POLES, FINE LINE CHUCK ALONE IS WORTH THE VALUE OF THE MACHINE 1 1/2HP SPINDLE, RUNS QUIET, NO BEARING NOISE, WIRED 220 VOLT, 3 PHASE TABLE SMOOTH, WAYS VERY GOOD TABLE STOPS RECTIFIER SHE IS A GOOD ONE, WILL NOT BE DISAPPOINTED SKIDDING COST IF APPLICABLE FOR SHIPPING...$65.00 WILL BE SECURED PROPERLY TO SKID, SHRINK WRAPPED WE DO NOT USE PALLETS, SKID  4 X4 RUNNERS 2 X 6 SOLID TOP NO CHARGE FOR LOADING

Directions

Similar products from Metalworking Equipment

Rare NOS PRESTO ENGLAND Metal Lathe THREAD HAND CHASER 20 tpi U.S.S. OUTSIDE

Rare NOS PRESTO ENGLAND Metal Lathe THREAD HAND CHASER 20 tpi U.S.S. OUTSIDE

  • Merrickville, Ontario, Canada
  • May 30th
Cleveland Pneumatic tool. Rivet Squeezer

Cleveland Pneumatic tool. Rivet Squeezer

  • Mount Vernon, Washington, United States
  • May 30th
Rare NOS PRESTO ENGLAND Metal Lathe THREAD HAND CHASER 32 tpi U.S.S. OUTSIDE

Rare NOS PRESTO ENGLAND Metal Lathe THREAD HAND CHASER 32 tpi U.S.S. OUTSIDE

  • Merrickville, Ontario, Canada
  • May 30th
Bridgeport right angle milling head

Bridgeport right angle milling head

  • Valley Stream, New York, United States
  • May 30th
Haas 4th axis cnc 5c rotary indexer wcontrol 2008 brushless mill milling vf1 234

Haas 4th axis cnc 5c rotary indexer wcontrol 2008 brushless mill milling vf1 234

  • Largo, Florida, United States
  • May 30th
Machinist / Toolmaker Tools Lot , Starrett, Brown & Sharpe, Miller Falls & More

Machinist / Toolmaker Tools Lot , Starrett, Brown & Sharpe, Miller Falls & More

  • Sebastopol, California, United States
  • May 30th
Machinist Tools /Toolmaker/ R8 HORMA Boring Head Set With Bits, Holders,Wood Box

Machinist Tools /Toolmaker/ R8 HORMA Boring Head Set With Bits, Holders,Wood Box

  • Sebastopol, California, United States
  • May 30th
machinist lot/ End Mill Lot, Reamer, Taps, Drill Rod, Clamps, Drill Bits & Studs

machinist lot/ End Mill Lot, Reamer, Taps, Drill Rod, Clamps, Drill Bits & Studs

  • Sebastopol, California, United States
  • May 30th
Spi TOOLS 9" X 4.5" X 3.25" DEMAGNETIZER 51-171-7 NEW!!

Spi TOOLS 9" X 4.5" X 3.25" DEMAGNETIZER 51-171-7 NEW!!

  • Bremen, Indiana, United States
  • May 30th
Kennedy Flip Top Wall Hanging Metal Machinist Tool Chest Box Drill Box Very Rare

Kennedy Flip Top Wall Hanging Metal Machinist Tool Chest Box Drill Box Very Rare

  • Greensboro, North Carolina, United States
  • May 30th
TOOL CABINET, FULL OF GOODIES, GRINDERS, COLLETS, WELDING ROD, ETC. ETC.

TOOL CABINET, FULL OF GOODIES, GRINDERS, COLLETS, WELDING ROD, ETC. ETC.

  • Vassar, Michigan, United States
  • May 29th
LITTEL, CRADLE STRAIGHTNER, 48" OD X 8" WIDTH, 2000LB. CAPACITY, GOOD

LITTEL, CRADLE STRAIGHTNER, 48" OD X 8" WIDTH, 2000LB. CAPACITY, GOOD

  • Vassar, Michigan, United States
  • May 29th
TARNOW, LATHE, 22" SWING X 98" CENTERS, TAPER, THREADING,3" SPINDLE BORE, 1972

TARNOW, LATHE, 22" SWING X 98" CENTERS, TAPER, THREADING,3" SPINDLE BORE, 1972

  • Warren, Michigan, United States
  • May 29th
CINCINNATI, CENTERLSS GRINDER, # 3, WITH 14 FT IN-OUT BARFEED,THRU FEED REST

CINCINNATI, CENTERLSS GRINDER, # 3, WITH 14 FT IN-OUT BARFEED,THRU FEED REST

  • Taylor, Michigan, United States
  • May 29th
AXELSON, LATHE, 2516, 3" SPINDLE BORE, 28" SWING, 84" CENTERS, GOOD

AXELSON, LATHE, 2516, 3" SPINDLE BORE, 28" SWING, 84" CENTERS, GOOD

  • Lansing, Michigan, United States
  • May 29th
ENCO 9/16" Style D Self Opening Die Head 5/8" Shank and 5 Sets of Chasers

ENCO 9/16" Style D Self Opening Die Head 5/8" Shank and 5 Sets of Chasers

  • Youngstown, Ohio, United States
  • May 29th
BRIDGEPORT, ORIGINAL , TABLE POWERFEED, IN GOOD WORKING ORDER, HIGH TORQUE

BRIDGEPORT, ORIGINAL , TABLE POWERFEED, IN GOOD WORKING ORDER, HIGH TORQUE

  • New Baltimore, Michigan, United States
  • May 29th
LATHE, SIMMONS, 60" SWING X 18 FT CENTERS, 40 HP, LONG TAPER,OLDER, RUNNING

LATHE, SIMMONS, 60" SWING X 18 FT CENTERS, 40 HP, LONG TAPER,OLDER, RUNNING

  • Lansing, Michigan, United States
  • May 29th
BRIDGEPORT, 2 HP, 42" TABLE, CHROME, SOME COLLETS

BRIDGEPORT, 2 HP, 42" TABLE, CHROME, SOME COLLETS

  • Warren, Michigan, United States
  • May 29th
JIG BORER, ATLANTIC, MODEL 6000 RUNS GREAT, READ-OUTS , TOOLING

JIG BORER, ATLANTIC, MODEL 6000 RUNS GREAT, READ-OUTS , TOOLING

  • Warren, Michigan, United States
  • May 29th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies