Relay module DIY kit for clap switch, US $13.00 – Picture 0

Relay module DIY kit for clap switch, US $13.00 – Picture 1

Relay Module Diy Kit For Clap Switch

US $13.00

Melbourne, VIC, Australia
Jan 29th

Open on mobile:
QR code

ITEM LOCATION: MELBOURNE, AUSTRALIA Description: This is a dependent do-it-yourself (DIY) kit module that has to be used with a clap switch available on ebay. This kit DOES NOT work independently as a clap switch. The following clap switch works with the relay module DIY kit. You can purchase it on ebay from any seller you want. The relay module DIY kit comes as a pack of parts kit and is easily assembled if you can follow the silkscreen indicators (labels) and have beginning experience with a soldering iron. You will need to read the resistor bands or use a multimeter to determine the resistor sizes. Both the kits operate with 9V batteries. Features: A DIY kit module that works with the clap switch mentioned above. It is useless without the clap switch. Operates a 100-240V lamp with clap/loud sound. Supply voltage: 6V-9V. The same power supply can be used for the clap switch. There are two supply input points: a DC barrel and a screw terminal. You can use one of the points to power up the kit. Dimension: 48.26mm x 49.53mm. Relay specification: Activation voltage: 5V DC. Controls appliances operating at 10A 250VAC, 10A 125VAC, 10A 30VDC, 10A 28VDC. Suitable for Europe, North America, Australia and New Zealand. The kit package contains the following components: THE KIT COMES UNASSEMBLED 1 x Bare PCB with Silkscreen indicators 2 x 1K carbon film resistor 1 x 4.7K carbon film resistor 1 x 1N4001 diode 1 x LM7805 1 x BD139 1 x 0.1uF (code- 104) 2 x 10uF capacitor 1 x PC817 optocoupler 1 x SPDT switch 1 x 5V relay 1 x 3 pin screw terminal 1 x 2 pin screw terminal 1 x DC barrel 1 x 5mm LED 1 x 9V battery connector WE DO NOT SHIP THE CLAP SWITCH ALONG WITH THE KIT PACKAGE, YOU HAVE TO BUY THE CLAP SWITCH SEPARATELY ON EBAY. Documents: Assembly tutorial Connecting clap switch to the relay module How to connect a lamp to the relay module