+ Post new Ad
Replacement Outside Jaws for a 3 Jaw Chuck, US $1700 – Picture 0
Replacement Outside Jaws for a 3 Jaw Chuck, US $1700 – Picture 0

Replacement Outside Jaws For A 3 Jaw Chuck

US $1700

  • Weatherford, Oklahoma, United States
  • Jun 12th
Open on mobile:
QR code
I received this set of Jaws with a machine I bought. They don’t fit my machine so I’m selling them. I don’t see any ware on them, they are in very good conditions. The markings are 743 and NE8620. Each Jaw has its own jaw number, example 1, 2, or 3 for jaw ordering in the chuck. The Clamp threads appear to be between 10 to 12 inch diameter, which should work on maybe a 12 to 14 inch chuck.  The photos show the clamp thread area with a 12 inch diameter circle against it.   Dimensions: Track width is 1.454” Jaw height is 3.113” Jaw length is 4.408” See Photo for additional dimensions.

Directions

Similar products from Lathe Chucks

8" 3 JAW LATHE CHUCK 2 PIECE JAWS L0 MOUNT WITH EXTRA SET STEEL SOFT JAWS

8" 3 JAW LATHE CHUCK 2 PIECE JAWS L0 MOUNT WITH EXTRA SET STEEL SOFT JAWS

  • Chehalis, Washington, United States
  • Jun 13th
KITAGAWA S1552-15Y ROTARY HYDRAULIC CYLINDER New No box

KITAGAWA S1552-15Y ROTARY HYDRAULIC CYLINDER New No box

  • Orange, Connecticut, United States
  • Jun 13th
MAGNETIC CHUCK 6 X 18 LOC2462

MAGNETIC CHUCK 6 X 18 LOC2462

  • Sidney, Ohio, United States
  • Jun 13th
BROWN $ SHARP MAGNETIC CHUCK MODEL 618 6 X 18 SERIAL # 8515 LOC2461

BROWN $ SHARP MAGNETIC CHUCK MODEL 618 6 X 18 SERIAL # 8515 LOC2461

  • Sidney, Ohio, United States
  • Jun 13th
6" 3 jaw lathe chuck Brand new never used ****************************

6" 3 jaw lathe chuck Brand new never used ****************************

  • San Diego, California, United States
  • Jun 13th
M6 X 48MM LOCKING SCREW FOR 0XA NO.7 HOLDER

M6 X 48MM LOCKING SCREW FOR 0XA NO.7 HOLDER

  • Chino, California, United States
  • Jun 13th
Semi-finished Back Plate for D1-8 Spindle

Semi-finished Back Plate for D1-8 Spindle

  • Garland, Texas, United States
  • Jun 13th
8" Samchully HH-08 3-Jaw Hydraulic Chuck for CNC Lathe, A2-6 Mount, Looks Unused

8" Samchully HH-08 3-Jaw Hydraulic Chuck for CNC Lathe, A2-6 Mount, Looks Unused

  • West Babylon, New York, United States
  • Jun 12th
Used Lathe Parts

Used Lathe Parts

  • San Pedro, California, United States
  • Jun 12th
6" Cushman 3 Jaw Chuck from 10" South Bend Heavy 10 Lathe, 2-1/4" x 8 Mount

6" Cushman 3 Jaw Chuck from 10" South Bend Heavy 10 Lathe, 2-1/4" x 8 Mount

  • Rocky Point, New York, United States
  • Jun 12th
SUBURBAN DMB-44 Magnum Force Chuck

SUBURBAN DMB-44 Magnum Force Chuck

  • Duncan, South Carolina, United States
  • Jun 12th
SUBURBAN DMB-510 Magnum Force Chuck

SUBURBAN DMB-510 Magnum Force Chuck

  • Duncan, South Carolina, United States
  • Jun 12th
SUBURBAN DMB-66 Magnum Force Chuck

SUBURBAN DMB-66 Magnum Force Chuck

  • Duncan, South Carolina, United States
  • Jun 12th
SUBURBAN DMB-612 Magnum Force Chuck

SUBURBAN DMB-612 Magnum Force Chuck

  • Duncan, South Carolina, United States
  • Jun 12th
SUBURBAN DMB-618 Magnum Force Chuck

SUBURBAN DMB-618 Magnum Force Chuck

  • Duncan, South Carolina, United States
  • Jun 12th
WALKER DXM9555 (SCV-1.5) ElectroMagnetic Chuck Control

WALKER DXM9555 (SCV-1.5) ElectroMagnetic Chuck Control

  • Duncan, South Carolina, United States
  • Jun 12th
WALKER DXM9568 (SMART-3B) ElectroMagnetic Chuck Control

WALKER DXM9568 (SMART-3B) ElectroMagnetic Chuck Control

  • Duncan, South Carolina, United States
  • Jun 12th
H&R HR-8-MTGRJ 8' Tongue & Groove 2 Step Reversible Hard Jaws

H&R HR-8-MTGRJ 8' Tongue & Groove 2 Step Reversible Hard Jaws

  • Duncan, South Carolina, United States
  • Jun 12th
H&R HR-12-MTGRJ 12' Tongue & Groove 2 Step Reversible Hard Jaws

H&R HR-12-MTGRJ 12' Tongue & Groove 2 Step Reversible Hard Jaws

  • Duncan, South Carolina, United States
  • Jun 12th
BISON 7-887-312 Scroll-for 3 Jaw Chuck Size:12'

BISON 7-887-312 Scroll-for 3 Jaw Chuck Size:12'

  • Duncan, South Carolina, United States
  • Jun 12th

People who viewed this item also vieved

Starrett 651A1Z Dial Indicator W/O Deep Hole Attachment, 0.375" Stem Dia., Back

Starrett 651A1Z Dial Indicator W/O Deep Hole Attachment, 0.375" Stem Dia., Back

  • Richmond Hill, New York, United States
  • Jan 30th
Starrett 651B5 Dial Indicator W/O Deep Hole Attachment, 0.375" Stem Dia., Back

Starrett 651B5 Dial Indicator W/O Deep Hole Attachment, 0.375" Stem Dia., Back

  • Richmond Hill, New York, United States
  • Jan 30th
Starrett 57B Full-SZd Surface Gauge W/ Cast Iron Base, 9" and 12" Spindle

Starrett 57B Full-SZd Surface Gauge W/ Cast Iron Base, 9" and 12" Spindle

  • Richmond Hill, New York, United States
  • Jan 30th
FPG CM4 Live Center MT4

FPG CM4 Live Center MT4

  • Spring Valley, California, United States
  • Jan 30th
3/4" Machinist Lathe Tool:Lathe Dog -Atlas/Craftsman/South Bend

3/4" Machinist Lathe Tool:Lathe Dog -Atlas/Craftsman/South Bend

  • Ossian, Indiana, United States
  • Jan 30th
2, OLDER LIVE BEARINGS CENTERS FOR WOOD METAL LATHE

2, OLDER LIVE BEARINGS CENTERS FOR WOOD METAL LATHE

  • Waterford, Michigan, United States
  • Jan 30th
DE-STA-CO 5310, 90 degree Horizontal Toggle Clamp

DE-STA-CO 5310, 90 degree Horizontal Toggle Clamp

  • Chillicothe, Missouri, United States
  • Jan 30th
Royal USA Deburring Tool Zip Multi / Burr Set 22022

Royal USA Deburring Tool Zip Multi / Burr Set 22022

  • Columbus, Ohio, United States
  • Jan 30th
Lot of 6 smaller Parallel Clamps

Lot of 6 smaller Parallel Clamps

  • Troy, Ohio, United States
  • Jan 30th
1/2" STRAIGHT SHANK ER16 COLLET HOLDER W/COLLETS Y158

1/2" STRAIGHT SHANK ER16 COLLET HOLDER W/COLLETS Y158

  • Montville, Ohio, United States
  • Jan 30th
KEARNEY & TRECKER TG 100 COLLET CHUCK 10" OAL (LOC1181A)

KEARNEY & TRECKER TG 100 COLLET CHUCK 10" OAL (LOC1181A)

  • Laingsburg, Michigan, United States
  • Jan 30th
KEARNEY & TRECKER TG 100 COLLET CHUCK 7.5" OAL (LOC1181A)

KEARNEY & TRECKER TG 100 COLLET CHUCK 7.5" OAL (LOC1181A)

  • Laingsburg, Michigan, United States
  • Jan 30th
TMS Smith Tool 51-008 Tap Adapter Collet 1/2 Inch Taps with 3/8" Shank

TMS Smith Tool 51-008 Tap Adapter Collet 1/2 Inch Taps with 3/8" Shank

  • Blue Springs, Missouri, United States
  • Jan 30th
HARDINGE STYLE 3H COLLET 9/16" DIAMETER - USED - GOOD CONDITION

HARDINGE STYLE 3H COLLET 9/16" DIAMETER - USED - GOOD CONDITION

  • Isanti, Minnesota, United States
  • Jan 30th
HARDINGE COLLET PADS FOR #5 WARNER SWASEY LATHE - 3/8" X 1/2" RECTANGULAR

HARDINGE COLLET PADS FOR #5 WARNER SWASEY LATHE - 3/8" X 1/2" RECTANGULAR

  • Isanti, Minnesota, United States
  • Jan 30th
Jones & Lamson comparator stage fixture & 2 pcs. V-blocks

Jones & Lamson comparator stage fixture & 2 pcs. V-blocks

  • Addison, Illinois, United States
  • Jan 30th
Mead Fluid Dynamics - Air Powered cross slide 3" Travel - Jig or Fixture

Mead Fluid Dynamics - Air Powered cross slide 3" Travel - Jig or Fixture

  • Milton Freewater, Oregon, United States
  • Jan 30th
WELDED ANGLE / FIXTURE PLATE 13 X 14 X 18 X 1" PLATE USED

WELDED ANGLE / FIXTURE PLATE 13 X 14 X 18 X 1" PLATE USED

  • Piqua, Ohio, United States
  • Jan 30th
Atlas # 9-101-64A Change Gear -64 Tooth / OO 194

Atlas # 9-101-64A Change Gear -64 Tooth / OO 194

  • Seffner, Florida, United States
  • Jan 30th
Atlas/Craftsman # 9-101-64A Change Gear - 64 Tooth / OO 193

Atlas/Craftsman # 9-101-64A Change Gear - 64 Tooth / OO 193

  • Seffner, Florida, United States
  • Jan 30th
Atlas/Craftsman # 9-101-64A Change Gear -64 Tooth / OO 192

Atlas/Craftsman # 9-101-64A Change Gear -64 Tooth / OO 192

  • Seffner, Florida, United States
  • Jan 30th
Adjustable Tailstock For 4-6 Inch Rotary Tables

Adjustable Tailstock For 4-6 Inch Rotary Tables

  • Chino, California, United States
  • Jan 30th
Heavy Duty Tailstock adjustable for Rotary table Dividing head

Heavy Duty Tailstock adjustable for Rotary table Dividing head

  • Houston, Texas, United States
  • Jan 30th
OKUMA 7000 4TH AXIS CNC ROTARY TABLE NCR-240 WITH HOWA CHUCK 7003 H0921M8 S-884

OKUMA 7000 4TH AXIS CNC ROTARY TABLE NCR-240 WITH HOWA CHUCK 7003 H0921M8 S-884

  • Warren, Michigan, United States
  • Jan 30th
ridgid pipe clamp no 2

ridgid pipe clamp no 2

  • Churchill, Ontario, Canada
  • Jan 30th
4" TOOL MAKERS VISE

4" TOOL MAKERS VISE

  • Wadley, Alabama, United States
  • Jan 30th
Bench Vise, Machine Vise, Wilton

Bench Vise, Machine Vise, Wilton

  • Bad Axe, Michigan, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies