Rigol Function/arbitrary Waveform Generators Dg2041a

US $4500

shenzhen, China
Jun 11th

Open on mobile:
QR code

DG2041A Function Waveform Generators Application 1. Simulation of sensors and Real Word Signals 2. In Circuit Function Test 3. Serial Bus Test 4. IC test 　 Advanced Features 1. Direct Digital Synthesizer(DDS) Technology 2. 100 MSa/s of sample rate, 14 bits of vertical resolution,512pts of Waveform Length 3. 10 standard waveforms: Sine, Square, Ramp, Pulse, Noise, Exponential Rise, Exponential Fall, Sin(x)/x, Cardiac, DC 4. User defined Arbitrary Waveform 5. Versatile modulation: AM,FM,PM,FSK,PWM,Sweep,Burst 6. Versatile input and output signals: Waveforms output, Synchronous Signals output, External Modulation Source, Clock Reference (10 MHz),External Trigger and Internal Clock Output (10 MHz) 7. Interface: USB Host & Device, RS-232, GPIB, LAN 8. Built-in LAN interface, supports WEB remote control 9. USB Host interface support USB flash drive 　 Typical Output Sine 　　 Pulse 　 Arbitrary Waveform 　 AM 　 FSK 　 Sweep 　　 Easy to use Features Press key to enter help system File system (USB flash drive) 　　　　　 Performance Characteristics Model DG2041A Standard Waveforms Sine、Square、Ramp、Pluse、Noise、Exponential Rise、Exponential Fall、Sinc、 Cardiac、DC Sine 1 μHz to 40 MHz Square 1 μHz to 40 MHz Pulse 500 μHz to 16 MHz Ramp 1 μHz to 500 kHz Arb 1 μHz to 12 MHz White Noise 20 MHz bandwidth (-3 dB) Resolution 1 μHz Accuracy Within 90 days: 10 ppm Within 1 year: 20 ppm,18°C - 28°C Temperature index < 2 ppm/°C 　 Sine Wave Spectral Purity Harmonic Distorion < 1 Vpp > 1 Vpp -70 dBc -70 dBc -65 dBc -60 dBc -50 dBc -45 dBc -40 dBc -35 dBc Total Harmonic Distorion DC to 20 kHz 0.04% Spurious (non-harmonic) DC to 1 MHz < -70 dBc 1 MHz to 10 MHz < -70 dBc + 6 dB/octave Phase Noise 10kHz Offset –115 dBc / Hz, typical Square Wave Characteristic Rise/Fall Time < 8 ns (10% to 90%) Overshoot < 2% Duty Cycle 20% to 80% (to 10 MHz) Asymmetry 1% of period+ 5 ns (below 50% Duty Cycle) Ramp 1 μHz to 1 MHz Jitter 300 ps + 0.1% of period Pulse Wave Characteristics Pulse Width 2000 s max period; 12ns min period; 1ns resolution Variable Edge Time 5 ns to 1 ms Overshoot < 2% Jitter 300 ps + 0.1% of the period Arb Wave Characteristics Frequency Range 1 μHz to 12 MHz Waveform Length 2 pts to 512 kpts Amplitude Accuracy 14 bits (including sign) Sample Rate 100 MSa/s Minimum Edge Time 10 ns Jitter (RMS) 2.5 ns + 30 ppm Non-Volatile Storage 4 waveforms Output Characteristics Amplitude 20 mVpp - 10 Vpp (50 Ω) 40 mVpp - 20 Vpp (High Z) 【Note1】 Amplitude Accuracy (100 kHz) ± 1% of setting ± 1 mVpp Amplitude Flatness (sinewave relative to 100 kHz) <10 MHz 0.1 dB (± 1%) 10 MHz to 25 MHz 0.15 dB (± 1.5%) 25 MHz to 40 MHz 0.18 dB (± 4.0%) Other Parameters Clock Reference 10 MHz I/O USB Host, USB Device, RS-232, LAN/GPIB Optional Configuration Digital Logic Output Module AM Modulation Carrier Waveforms Sine, Square, Ramp, Arb Source Internal/ External Modulating Waveforms Sine, Square, Ramp, Noise, Arb (2 mHz to 20 kHz) Depth 0% - 120% FM Modulation Carrier Waveforms Sine, Square, Ramp, Arb Source Internal/ External Modulating Waveforms Sine, Square, Ramp, Noise, Arb (2 mHz to 20 kHz) Frequency Deviation DC to 20 MHz【Note2】 PM Modulation Carrier Waveforms Sine, Square, Ramp, Arb Source Internal/ External Modulating Waveforms Sine, Square, Ramp, Noise, Arb (2 mHz to 20 kHz) Phase Deviation 0 to 360° FSK Modulation Carrier Waveforms Pulse Source Internal/ External Modulating Waveforms 50% duty cycle square (2 mHz to 100 kHz) PWM Modulation Carrier Waveforms Pulse Source Internal/ External Modulating Waveforms The pulse width 0% to 100% Sweep Carrier Waveforms Sine, Square, Ramp, Arb Type Linear or Logarithmic Direction Up or Down Sweep Time 1 ms to 500 s ± 0.1% Source Internal/External/Manual Marker Falling edge of Sync signal (Programmable Frequency) Burst Waveforms Sine, Square, Ramp, Pulse, Noise, Arb Types count (1 to 50,000 periods), infinite, gated Start Phase -360° to +360° Internal Period 1 ms – 500 s ± 1% Gate Source External Trigger Trigger Source Internal/External/Manual Other Parameters Built-in Help Multiple language Power AC100 - 240 V, 45 - 440 Hz, 50 VA Max Weight 2.7 kg 　 Note 1: The setting range of the amplitude (50): If the output frequency≤20MHz, the amplitude range: 20mVpp~10Vpp If the output frequency>20MHz, the amplitude range: 20mVpp~5Vpp The setting range of the amplitude (High Z): If the output frequency≤20MHz, the amplitude range: 40mVpp~20Vpp If the output frequency>20MHz, the amplitude range: 40mVpp~10Vpp Note2: The value are dissimilar for different types, as for the type of 25MHz, it will be 12.5MHz. 　 Click the picture to view large picture Click here to download the software: www.aidetek.com/New_products_info/Datasheet/rigo/Ultrawave_for_DG_Series.exe　