Rm660 Digital Coating Thickness Gauge 0.02mm Resolution Paint Coating Meter N#s7

US $19.64

ShenZhen, China
Jun 27th

Open on mobile:
QR code

Overall, the RM660 Digital Coating Thickness Gauge is a valuable tool for measuring the thickness of non-metallic coatings on metal substrate surfaces. Its features ensure accurate and precise measurements that are essential for various industries. The RM660 Digital Coating Thickness Gauge has several features that must be taken into account when using it. Firstly, the matrix metal properties must be similar to the magnetic and surface roughness of the base metal of the standard film. Secondly, the thickness of the base metal must not exceed the critical thickness. Thirdly, measurements should not be carried out near the point of mutation near the specimen, such as edge, hole, and inner corner. Fourthly, it should not be measured on the curved surface of the specimen. Finally, it is important to take several readings in each measurement area as each reading of the instrument is not exactly the same. In order to use the RM660 Digital Coating Thickness Gauge, one must press the detector on the to-be-tested surface. The thickness of coatings on metal surface will be displayed on the LCD screen. The measurement value will be held on the LCD screen and must be quickly removed from the to-be-tested surface. This article discusses the RM660 Digital Coating Thickness Gauge, which is a tool used to measure the thickness of non-metallic coatings on metal substrate surfaces. This gauge has a detection capability of 0-1.25mm and a measurement accuracy of 2%RDG В± 0.02mm. It is powered by a 3V CR2032 button battery and has a display resolution of 0.02mm/1mil.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Unbranded
Critical thickness of matrix	0.5mm
MPN	Does Not Apply
Display resolution	0.02mm/1mil
Detection capability	non-metallic coating on 0~1.25mm metal surface
Working environment temperature	-5~+40
Measurement accuracy	2%RDG ± 0.02mm (2%RDG ± 1mil) (only steel and aluminum).
Working environment humidity	5%~95%RH non condensation
Power supply	3V 1xCR2032 button battery(Not included)
Storage environment	-20~60°C,<85% RH(Battery not included)
Working current	<10mA
Size	approx.80mm x 42mm x 20mm/3.14x1.65x0.78''
Automatic shutdown time	leaving the tested object, no operation for 1 minutes.
Weight	approx.103g
Minimum diameter of matrix	10mm
Type	Other
UPC	Does Not Apply
EAN	Does Not Apply