+ Post new Ad
ROCK RIVER TOOL 1" x 7/8" 2FL Carbide Tipped Straight End Mill RHC 230232, US $750 – Picture 0
ROCK RIVER TOOL 1" x 7/8" 2FL Carbide Tipped Straight End Mill RHC 230232, US $750 – Picture 1
ROCK RIVER TOOL 1" x 7/8" 2FL Carbide Tipped Straight End Mill RHC 230232, US $750 – Picture 0
ROCK RIVER TOOL 1" x 7/8" 2FL Carbide Tipped Straight End Mill RHC 230232, US $750 – Picture 1

Rock River Tool 1" X 7/8" 2fl Carbide Tipped Straight End Mill Rhc 230232

US $750

  • Huntersville, North Carolina, United States
  • Jan 30th
Open on mobile:
QR code
TWO STRAIGHT FLUTES TYPE 2302 — TWO STRAIGHT FLUTES Maximum chip room for easier chip removal. Also used when machine horsepower is too low for higher capacity end mills. Flute long carbide tips brazed to hardened alloy steel bodies. Cutting diameter NC tolerance plus .002" minus .000". Straight shanks with drive flats. USE: For milling cast iron, non-ferrous metals and non-metals but excluding steel. 7/8 SHANK 1" CUTTING DIA
Condition:
New other (see details): A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections. ...
Brand ROCK RIVER TOOL
Quantity 1

Directions

Similar products from Other Cutting Equipment & Expendables

STANDARD Spline Taper Drive Counterbore Set

STANDARD Spline Taper Drive Counterbore Set

  • Columbus, Nebraska, United States
  • Jan 30th
SC Tool Inc Carbide 12.5mm Counter Sink Bit (Regrind)

SC Tool Inc Carbide 12.5mm Counter Sink Bit (Regrind)

  • Chillicothe, Missouri, United States
  • Jan 30th
Accupro SOL CRB B/bars .290 X 1.250 X 5/16 SHK

Accupro SOL CRB B/bars .290 X 1.250 X 5/16 SHK

  • North Branford, Connecticut, United States
  • Jan 30th
Alfa Tools SC-3DC, 3/8" x 3/4", Double Cut, Cylindrical Radius End Carbide Burr

Alfa Tools SC-3DC, 3/8" x 3/4", Double Cut, Cylindrical Radius End Carbide Burr

  • Chillicothe, Missouri, United States
  • Jan 30th
1.25" CARBIDE TIP COUNTERBORE, 1" SHANK, 3/8" thru Hole

1.25" CARBIDE TIP COUNTERBORE, 1" SHANK, 3/8" thru Hole

  • Elmwood Park, Illinois, United States
  • Jan 30th
Tap Specialty Thread 1 3/4"-16

Tap Specialty Thread 1 3/4"-16

  • Bowie, Maryland, United States
  • Jan 30th
Erickson CV40BSMC075350 CV Shell Mill Adapter

Erickson CV40BSMC075350 CV Shell Mill Adapter

  • Garden City, Idaho, United States
  • Jan 30th
SOLID CARBIDE SLITTING SAW 3" DIAx.085" WIDTHx1" HOLE 30 TTH NIAGARA NEW $19.60

SOLID CARBIDE SLITTING SAW 3" DIAx.085" WIDTHx1" HOLE 30 TTH NIAGARA NEW $19.60

  • North Tonawanda, New York, United States
  • Jan 30th
New 1pcs Carbide Rotary File/Burr Cylindrical burrs 6mm

New 1pcs Carbide Rotary File/Burr Cylindrical burrs 6mm

  • CN, China
  • Jan 30th
(2) RTW CFG 4620 INSERTS GRADE CQ2

(2) RTW CFG 4620 INSERTS GRADE CQ2

  • Huntersville, North Carolina, United States
  • Jan 30th
M.A. Ford 3/8 x 90 degree C'Sink

M.A. Ford 3/8 x 90 degree C'Sink

  • Huntersville, North Carolina, United States
  • Jan 30th
ROTARY FILES LOT OF 6 1.0 DIAMETER FINE CUT H.S.S.

ROTARY FILES LOT OF 6 1.0 DIAMETER FINE CUT H.S.S.

  • Haysville, Kansas, United States
  • Jan 30th
ROTARY FILES LOT OF 2 1.0 DIAMETER FINE CUT H.S.S.

ROTARY FILES LOT OF 2 1.0 DIAMETER FINE CUT H.S.S.

  • Haysville, Kansas, United States
  • Jan 30th
ROTARY FILE BALL TYPE H.S.S.

ROTARY FILE BALL TYPE H.S.S.

  • Haysville, Kansas, United States
  • Jan 30th
ROTARY FILES 1.0 DIAMETER FINE CUT H.S.S.

ROTARY FILES 1.0 DIAMETER FINE CUT H.S.S.

  • Haysville, Kansas, United States
  • Jan 30th
COUNTERBORE 19/32 X 1/8 DIAMETER PILOT HOLE

COUNTERBORE 19/32 X 1/8 DIAMETER PILOT HOLE

  • Haysville, Kansas, United States
  • Jan 30th
ROTARY FILES LOT OF 4 1.0 DIAMETER FINE CUT H.S.S.

ROTARY FILES LOT OF 4 1.0 DIAMETER FINE CUT H.S.S.

  • Haysville, Kansas, United States
  • Jan 30th
Cutting Torch Hose

Cutting Torch Hose

  • Grover, North Carolina, United States
  • Jan 30th
HIGH SPEED COUNTERSINK 3/8 " 82 degree 6 Six flute Chatterless Made in U.S.A.

HIGH SPEED COUNTERSINK 3/8 " 82 degree 6 Six flute Chatterless Made in U.S.A.

  • Highland Park, New Jersey, United States
  • Jan 30th
MSC MINI- SKIMMER COG BELT - 360P 12" REACH

MSC MINI- SKIMMER COG BELT - 360P 12" REACH

  • United States
  • Jan 30th

People who viewed this item also vieved

GREENLEAF Carbide Turning Inserts RCGT-32.5-TF G-920 Qty 10 [1934]

GREENLEAF Carbide Turning Inserts RCGT-32.5-TF G-920 Qty 10 [1934]

  • Saint Louis, Missouri, United States
  • Jan 30th
ISCAR Carbide Turning Inserts VNGG 2.5-1-NF IC907 Qty 10 [1934]

ISCAR Carbide Turning Inserts VNGG 2.5-1-NF IC907 Qty 10 [1934]

  • Saint Louis, Missouri, United States
  • Jan 30th
10 NEW 1/8" SHANK CARBIDE END MILLS. 2 FLUTE. DOUBLE END. BALL. USA MADE {F632}

10 NEW 1/8" SHANK CARBIDE END MILLS. 2 FLUTE. DOUBLE END. BALL. USA MADE {F632}

  • Mentor, Ohio, United States
  • Jan 30th
14 NEW 1/8" SHANK CARBIDE END MILLS. 4 FLUTE. DOUBLE END. BALL. USA MADE {F639}

14 NEW 1/8" SHANK CARBIDE END MILLS. 4 FLUTE. DOUBLE END. BALL. USA MADE {F639}

  • Mentor, Ohio, United States
  • Jan 30th
NEW 7mm Cutting Diameter 6 Flutes HSS Machine Reamer Milling Cutter

NEW 7mm Cutting Diameter 6 Flutes HSS Machine Reamer Milling Cutter

  • United States
  • Jan 30th
NEW 4.37mm 11/64" Diameter 6 Flutes HSS Machine Chucking Reamer Milling Cutter

NEW 4.37mm 11/64" Diameter 6 Flutes HSS Machine Chucking Reamer Milling Cutter

  • United States
  • Jan 30th
Greenlee 737 Knockout Punch Kit, 1-1/2" & 2" Conduit Size, Leather Case, Used

Greenlee 737 Knockout Punch Kit, 1-1/2" & 2" Conduit Size, Leather Case, Used

  • St. George, Utah, United States
  • Feb 21st
LOT OF 9 HSS DIES NO.2 -56 TO 1/4" -32 WITH 13/16" WRENCH P&W GTD

LOT OF 9 HSS DIES NO.2 -56 TO 1/4" -32 WITH 13/16" WRENCH P&W GTD

  • Ellington, New York, United States
  • Feb 21st
Wellsaw Model 58B Band Saw 7' 9-1/2" Blade Size

Wellsaw Model 58B Band Saw 7' 9-1/2" Blade Size

  • Williamsburg, Ohio, United States
  • Mar 7th
LOT OF 11 HSS SLITTING & SLOTTING BLADES 2-3/16" TO 4" WITH 1" BORE CLEVELAND

LOT OF 11 HSS SLITTING & SLOTTING BLADES 2-3/16" TO 4" WITH 1" BORE CLEVELAND

  • Ellington, New York, United States
  • Mar 7th
10 Sandvik Ceramic Inserts CNGN 12 07 16 T02520 Grade 6090

10 Sandvik Ceramic Inserts CNGN 12 07 16 T02520 Grade 6090

  • Lake Village, Indiana, United States
  • May 9th
(50 PCS) Greenleaf CNGA 433 T1 / CNGA120412T T01 WG-300 Ceramic Insert

(50 PCS) Greenleaf CNGA 433 T1 / CNGA120412T T01 WG-300 Ceramic Insert

  • Minneapolis, Minnesota, United States
  • May 9th
New American Made M&M "T" Cut-Off Parting Tool 1/16 x 1/2 x 3-1/2

New American Made M&M "T" Cut-Off Parting Tool 1/16 x 1/2 x 3-1/2

  • Leland, Illinois, United States
  • May 21st
12 Carbide 3/8" Mini Lathe Tool Bits Unimat Sherline Machinist Gunsmith Taig Lot

12 Carbide 3/8" Mini Lathe Tool Bits Unimat Sherline Machinist Gunsmith Taig Lot

  • Supply, North Carolina, United States
  • May 22nd
3/4" Type "C" Plain Broach Bushing

3/4" Type "C" Plain Broach Bushing

  • Coventry, Rhode Island, United States
  • May 25th
DUMONT 1-1/2" "C" Type Plain Broach Collar

DUMONT 1-1/2" "C" Type Plain Broach Collar

  • Coventry, Rhode Island, United States
  • May 25th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies