+ Post new Ad
ROCKWELL VARIABLE SPEED 20" DRILL PRESS , TELESCOPIC , DRILLS ANGLES, US $475.00 – Picture 0
ROCKWELL VARIABLE SPEED 20" DRILL PRESS , TELESCOPIC , DRILLS ANGLES, US $475.00 – Picture 1
ROCKWELL VARIABLE SPEED 20" DRILL PRESS , TELESCOPIC , DRILLS ANGLES, US $475.00 – Picture 2
ROCKWELL VARIABLE SPEED 20" DRILL PRESS , TELESCOPIC , DRILLS ANGLES, US $475.00 – Picture 3
ROCKWELL VARIABLE SPEED 20" DRILL PRESS , TELESCOPIC , DRILLS ANGLES, US $475.00 – Picture 4
ROCKWELL VARIABLE SPEED 20" DRILL PRESS , TELESCOPIC , DRILLS ANGLES, US $475.00 – Picture 5
ROCKWELL VARIABLE SPEED 20" DRILL PRESS , TELESCOPIC , DRILLS ANGLES, US $475.00 – Picture 6
ROCKWELL VARIABLE SPEED 20" DRILL PRESS , TELESCOPIC , DRILLS ANGLES, US $475.00 – Picture 0
ROCKWELL VARIABLE SPEED 20" DRILL PRESS , TELESCOPIC , DRILLS ANGLES, US $475.00 – Picture 1
ROCKWELL VARIABLE SPEED 20" DRILL PRESS , TELESCOPIC , DRILLS ANGLES, US $475.00 – Picture 2
ROCKWELL VARIABLE SPEED 20" DRILL PRESS , TELESCOPIC , DRILLS ANGLES, US $475.00 – Picture 3
ROCKWELL VARIABLE SPEED 20" DRILL PRESS , TELESCOPIC , DRILLS ANGLES, US $475.00 – Picture 4
ROCKWELL VARIABLE SPEED 20" DRILL PRESS , TELESCOPIC , DRILLS ANGLES, US $475.00 – Picture 5
ROCKWELL VARIABLE SPEED 20" DRILL PRESS , TELESCOPIC , DRILLS ANGLES, US $475.00 – Picture 6

Rockwell Variable Speed 20" Drill Press , Telescopic , Drills Angles

US $475.00

  • Manlius, New York, United States
  • Jan 30th
Open on mobile:
QR code
ROCKWELL MODEL #11-280 VARIABLE SPEED TELESCOPIC DRILL PRESS 4 SPEED VARAIBALE 32" DRILL PRESS WITH 12" X 24" TABLE PRESS IS TELESCOPIC AND ALSO DRILLS AT ANGLES 36" TALL X 32" DEEP X 24" WIDE DAYTON 1/3 HP 110 VOLT MOTOR RPM's 4700 , 2400 , 1250 , 700 SOLD IN RUNNING OPERATING CONDITION WITH AVERAGE WEAR SOLD AS IS WHERE IS , NO RETURNS ships to US only all shipping is at buyers expense will ship via truck or local pick up will pack and bubble wrap and palletize for shipping call with questions , attn: Dave 315-247-3731
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Brand ROCKWELL
Model 11-280

Directions

Similar products from Tools for Drilling & Tapping Equipment

DBL End mill 1/8" HSS

DBL End mill 1/8" HSS

  • Bridgewater, Connecticut, United States
  • Jan 30th
17/32 .5312 Super Cobalt Flat Bottom Spade Drill Insert TiN Coated Series #0 T-A

17/32 .5312 Super Cobalt Flat Bottom Spade Drill Insert TiN Coated Series #0 T-A

  • Hastings, Michigan, United States
  • Jan 30th
3/8 Premium Cobalt Spade Drill Insert TiN Coated Series #Y T-A 18YT-0012 NEW 1pc

3/8 Premium Cobalt Spade Drill Insert TiN Coated Series #Y T-A 18YT-0012 NEW 1pc

  • Hastings, Michigan, United States
  • Jan 30th
5/8 Super Cobalt Flat Bottom Spade Drill Insert TiN Coated Series #0 T-A 150T-00

5/8 Super Cobalt Flat Bottom Spade Drill Insert TiN Coated Series #0 T-A 150T-00

  • Hastings, Michigan, United States
  • Jan 30th
25/64 .3906 Super Cobalt Spade Drill Insert TiCN Coated Series #Y T-A 15YN-.390

25/64 .3906 Super Cobalt Spade Drill Insert TiCN Coated Series #Y T-A 15YN-.390

  • Hastings, Michigan, United States
  • Jan 30th
9/16 .5625 Super Cobalt Flat Bottom Spade Drill Insert TiN Coated Series #0 T-A

9/16 .5625 Super Cobalt Flat Bottom Spade Drill Insert TiN Coated Series #0 T-A

  • Hastings, Michigan, United States
  • Jan 30th
18mm .7087 Super Cobalt Flat Bottom Spade Drill Insert TiN Coated Series #1 T-A

18mm .7087 Super Cobalt Flat Bottom Spade Drill Insert TiN Coated Series #1 T-A

  • Hastings, Michigan, United States
  • Jan 30th
35/64 .5468 Carbide Spade Drill Insert TiALN Coated Series #0 T-A 1C50A-.546 NEW

35/64 .5468 Carbide Spade Drill Insert TiALN Coated Series #0 T-A 1C50A-.546 NEW

  • Hastings, Michigan, United States
  • Jan 30th
10.2mm .4015 Carbide Spade Drill Insert TiN Coated Series #Y T-A 1CYT-10.2 NEW A

10.2mm .4015 Carbide Spade Drill Insert TiN Coated Series #Y T-A 1CYT-10.2 NEW A

  • Hastings, Michigan, United States
  • Jan 30th
1/2 Carbide Spade Drill Insert TiCN Coated Series #Z T-A 1C5ZA-0016 NEW Allied 1

1/2 Carbide Spade Drill Insert TiCN Coated Series #Z T-A 1C5ZA-0016 NEW Allied 1

  • Hastings, Michigan, United States
  • Jan 30th
Procunier High Speed Tapping Attachment size 2 style E 2E steel 5/16 steel 1/2"

Procunier High Speed Tapping Attachment size 2 style E 2E steel 5/16 steel 1/2"

  • Union, Missouri, United States
  • Jan 30th
Kobalt 3-1/2" #5 Screw Extractor item #232653 New

Kobalt 3-1/2" #5 Screw Extractor item #232653 New

  • Venice, Florida, United States
  • Jan 30th
Bench Drill Press 6", 5 Speed, Spindle Morse 2a, 1700 RPM, 1/3 HP, Chuck 1/2"

Bench Drill Press 6", 5 Speed, Spindle Morse 2a, 1700 RPM, 1/3 HP, Chuck 1/2"

  • Enola, Pennsylvania, United States
  • Jan 30th
CATERPILLAR THREADED INSERT MASTER KIT 9S3700 COURSE THREAD #10 THRU 1 1/2 INCH

CATERPILLAR THREADED INSERT MASTER KIT 9S3700 COURSE THREAD #10 THRU 1 1/2 INCH

  • United States
  • Jan 30th
1/2" x 82 deg Countersink

1/2" x 82 deg Countersink

  • Lebanon, Tennessee, United States
  • Jan 30th
3/4" x 60 deg Countersink

3/4" x 60 deg Countersink

  • Lebanon, Tennessee, United States
  • Jan 30th
Cleveland 3/4" x 82 deg Countersink 1/2" shank turned down to 3/8"

Cleveland 3/4" x 82 deg Countersink 1/2" shank turned down to 3/8"

  • Lebanon, Tennessee, United States
  • Jan 30th
Severance 1" x 41 deg. Countersink CK-1"41

Severance 1" x 41 deg. Countersink CK-1"41

  • Lebanon, Tennessee, United States
  • Jan 30th
WALTER COR BOR INDEXABLE DRILL 1.25" SHANK 7" OAL 8110 0100 F 1.00 DIA

WALTER COR BOR INDEXABLE DRILL 1.25" SHANK 7" OAL 8110 0100 F 1.00 DIA

  • San Carlos, California, United States
  • Jan 30th
Procunier #1 EX Tapping Head and collet

Procunier #1 EX Tapping Head and collet

  • Hamlin, New York, United States
  • Jan 30th

People who viewed this item also vieved

3.5 Sherline Lathe 4000A

3.5 Sherline Lathe 4000A

  • Flushing, New York, United States
  • Jan 30th
Cut-off/ Parting Blade Tool Holder 1/2"

Cut-off/ Parting Blade Tool Holder 1/2"

  • Elk, Washington, United States
  • Jan 30th
SOUTH BEND 9" 10K METAL LATHE SADDLE CARRIAGE APRON LOCK

SOUTH BEND 9" 10K METAL LATHE SADDLE CARRIAGE APRON LOCK

  • Holmdel, New Jersey, United States
  • Jan 30th
BRAND NEW BISON # 2 MT--1/2" END MILL ADAPTER DRAWBAR TYPE FREE SHIPPING

BRAND NEW BISON # 2 MT--1/2" END MILL ADAPTER DRAWBAR TYPE FREE SHIPPING

  • Seekonk, Massachusetts, United States
  • Jan 30th
Big Kaiser Angle Head CV50-AG90/HMC1.250-230

Big Kaiser Angle Head CV50-AG90/HMC1.250-230

  • Fullerton, California, United States
  • Jan 30th
Set of 6 American Made Hi-Speed End Mills

Set of 6 American Made Hi-Speed End Mills

  • Leland, Illinois, United States
  • Jan 30th
3mm Shank 3mm Diameter Ball Head Diamond Grinding Mounted Point 30pcs

3mm Shank 3mm Diameter Ball Head Diamond Grinding Mounted Point 30pcs

  • Hong Kong, Hong Kong
  • Feb 28th
Drum sander parts

Drum sander parts

  • Elm City, North Carolina, United States
  • Feb 28th
Vintage Lot of Five (5) NOS Various Grinding Stone Wheels

Vintage Lot of Five (5) NOS Various Grinding Stone Wheels

  • Davisburg, Michigan, United States
  • Feb 28th
Hardinge, Model HSL-59 Precision Speed Lathe. Check out video link below! Nice!!

Hardinge, Model HSL-59 Precision Speed Lathe. Check out video link below! Nice!!

  • Perry, Ohio, United States
  • Mar 1st
NEW MIKRON TANK MOUNTED FILTER HF502-20.201-AS~HHR16160~HHC04169

NEW MIKRON TANK MOUNTED FILTER HF502-20.201-AS~HHR16160~HHC04169

  • Meridian, Idaho, United States
  • Mar 1st
Erowa Technology ISOCUT ORBITER EDM TOOLING

Erowa Technology ISOCUT ORBITER EDM TOOLING

  • Harrison, New Jersey, United States
  • Mar 1st
Air Powered Finger Sander Strong Wear-resisting Pneumatic Swing Sanda Machines

Air Powered Finger Sander Strong Wear-resisting Pneumatic Swing Sanda Machines

  • CN, China
  • Mar 5th
Leather Panel Forming Shot Bag 18-inch Metal Shaping Beater Bag

Leather Panel Forming Shot Bag 18-inch Metal Shaping Beater Bag

  • Jenks, Oklahoma, United States
  • Mar 5th
P and G Pram Plastic Media Blasting Machine

P and G Pram Plastic Media Blasting Machine

  • Guthrie, Oklahoma, United States
  • Mar 5th
Lockformer Flagler 16 Gauge Sheet Metal Pittsburgh Machine (Used) Roper Whitney

Lockformer Flagler 16 Gauge Sheet Metal Pittsburgh Machine (Used) Roper Whitney

  • Allen Park, Michigan, United States
  • Mar 6th
Pexto sheet metal shear

Pexto sheet metal shear

  • Suffolk, Virginia, United States
  • Mar 6th
Vintage Whitney Imperial Punch No 7 1/2, 5 Ton Punch Capacity bj

Vintage Whitney Imperial Punch No 7 1/2, 5 Ton Punch Capacity bj

  • Cuba, Illinois, United States
  • Mar 6th
D-2 Tool Head for Escomatic Machine

D-2 Tool Head for Escomatic Machine

  • Hampton, Virginia, United States
  • Mar 11th
NICE! LANDIS 7/8 GEOMETRIC THREADING DIE HEAD 11/16 - 7/8 N.F. & 3/8 - 1/2 PIPE

NICE! LANDIS 7/8 GEOMETRIC THREADING DIE HEAD 11/16 - 7/8 N.F. & 3/8 - 1/2 PIPE

  • Chino, California, United States
  • Mar 11th
CITIZEN CNC SWISS SCREW MACHINE

CITIZEN CNC SWISS SCREW MACHINE

  • Baldwin Park, California, United States
  • Mar 11th
20 mm system 3r tooling EDM machine 20mm shank shanks tool electrode holder

20 mm system 3r tooling EDM machine 20mm shank shanks tool electrode holder

  • Elk Grove Village, Illinois, United States
  • May 19th
System 3R manual chuck - FH33

System 3R manual chuck - FH33

  • Bloomfield, Connecticut, United States
  • May 19th
6" Y 8" X Hansvedt CS-1 RAM-TYPE EDM, 9" x 15" Tbl, 30 AMPS

6" Y 8" X Hansvedt CS-1 RAM-TYPE EDM, 9" x 15" Tbl, 30 AMPS

  • Albuquerque, New Mexico, United States
  • May 20th
14" Blade Dia Scotchman CPO 350 PK Manual *Made in the USA* COLD SAW, with power

14" Blade Dia Scotchman CPO 350 PK Manual *Made in the USA* COLD SAW, with power

  • Harrison, New Jersey, United States
  • Jun 12th
#9279: 10? x 14? Rusch Horizontal Bandsaw Fabrication Equipment Used HBSA

#9279: 10? x 14? Rusch Horizontal Bandsaw Fabrication Equipment Used HBSA

  • Orange City, Iowa, United States
  • Jun 13th
3 HP ACCO-CAMPBELL SEVER-ALL Abrasive Cut Off Saw Model 1A

3 HP ACCO-CAMPBELL SEVER-ALL Abrasive Cut Off Saw Model 1A

  • Binghamton, New York, United States
  • Jun 14th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies