Rohde & Schwarz Fsem30 Spectrum Analyzer 20hz - 26.5ghz Calibrated

US $4000

  • Roseville, California, United States
  • May 26th
Rohde & Schwarz FSEM30 spectrum analyzer 20Hz - 26.5GHz The Rohde & Schwarz FSEM30 spectrum analyzer is a wide band, sensitive receiver. It works on the principle of "super-heterodyne receiver" to convert higher frequencies (normally ranging up to several 10s of GHz) to measurable quantities. The received frequency spectrum is slowly swept through a range of pre-selected frequencies, converting the selected frequency to a measurable DC level (usually logarithmic scale), and displaying the same on the CRT of the FSEM30. The CRT displays received signal strength (y-axis) against frequency ( x-axis).  Some applications for the FSEM30 Spectrum Analyzer include site monitoring. Verify that the frequency and signal strength of your transmitter is accurate. Interference: before a system is installed you use a Rohde & Schwarz FSEM30 Spectrum Analyzer to verify that the frequencies are not occupied or if the presence of a very strong signal will interfere with your new setup. Other tests include antenna isolation, co-channel interference, adjacent channel power, occupied bandwidth, intermodulation, microwave or satellite antenna alignment, and characterization of components.  24-cm LCD 9.5" display measure uncertainty - 1GHz: 1dB int RF trig for gated sweep  more than 20 sweeps/s 8 markers frequency counter w/ sel resolution numerous level & frequency lines split-screen display quasi-analog display 20Hz-26.5GHz spectrum analyzer. resolution bandwidth 1Hz to 10MHz; dynamic range 160dB with a noise floor range of <-74dB to <-135dB. capability down to bit stream level for digital mobile radio signals.  connector is a microwave adapter system. TESTED with CALIBRATION. minor cosmetic issues. You are bidding on the pictured item only. Unit is sold AS-IS  no warranty.  Buyer may return the item and is responsible for shipping charges.   tel: 877-417-7413 EBAY SALES TERMS AND CONDITIONS ***all Paypal purchases must deliver to a confirmed address*** The sale of all equipment described herein is conditioned upon the Terms and Conditions contained herein. Any additional or different terms that are proposed by the customer are hereby objected to and will not be binding upon Liberty Test Equipment unless specifically agreed to in writing by Liberty Test Equipment. Any order for or any statement of intent to purchase hereunder or any direction to deliver equipment shall constitute the customer's acceptance of all of Liberty Test Equipment's Terms and Conditions that are stated herein. SHIPMENT F.O.B. point is Liberty Test Equipment's Inventory Center from which the shipment is made. Shipment will be made at the customer's expense in accordance with Liberty Test Equipment's standard shipping and handling charges. The seller will not be responsible for damage to uninsured shipments.   EXCUSABLE DELAYS Delivery dates are approximate. Liberty Test Equipment shall not be liable for delays in shipment due to causes beyond its reasonable control, including but not limited to acts of God, acts of the customer, acts of civil or military authority, governmental priorities, strikes, fires, floods, epidemics, war, riot, delays in transportation or car shortages, or inability because of any cause beyond the reasonable control of Liberty Test Equipment to obtain necessary materials, components, services or facilities. In the event of such delay, the date of the shipment shall be extended for a period equal to the time lost by reason of such delay. PAYMENT Payment shall be in advance of shipment. Liberty Test Equipment accepts Paypal, Visa, MasterCard, American Express, and Discover. All payments are to be made in U.S. dollars. CUSTOMER'S OBLIGATIONS The customer agrees to and shall be fully responsible for any loss of, or damage to, the equipment for any cause whatsoever. The customer shall pay all repair costs for any loss of, or damage to, the equipment. WARRANTY There is no warranty. FEEDBACK Liberty Test Equipment shall provide feedback after receiving the customer's feedback. Ebay relies on trust built by its users to ensure satisfactory and safe transactions in the future. With that said, negative feedback cuts both ways. We would be more than pleased to try to solve any issue that may have come up as a result of any equipment that you have purchased from us. Give us a chance and you will be pleased. The foregoing shall constitute the sole remedy of the customer and the sole liability of Liberty Test Equipment.

Directions

Similar products from Older Platforms for Spectrum Analysis Equipment

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies