Rohde & Schwarz Smb100a Signal Generator Calibrated W/ Warranty

US $5200

Roseville, California, United States
Jun 4th

Open on mobile:
QR code

Rohde & Schwarz SMB100A signal generator Excellent signal quality in the mid-range for high measurement accuracy in a wide variety of applications. High output power as standard provides power reserves to replace external amplifiers. Low cost of ownership and maximum instrument availability. • frequency ranges: 9kHz to 1.1, 2.2, 3.2 & 6GHz • RF output level of >+18dBm from 1MHz to 6GHz (+25dBm over range) • fast: < 1ms frequency and level setting times in "list mode" • SSB phase noise: typ -128dBc/Hz (1 GHz/20kHz offset) • accurate: < 0.5dB total uncertainty up to 3GHz, (<0.9dB up to 6GHz) • no wear: solid state RF attenuator up to 6GHz, reverse voltage protection • flexible concept allowing for on-site service with no calibration required • cal cycle of 3 years • compact: < 12 lbs and only 2 rack-units high • remote control via GPIB, LAN & USB USB connectors for USB devices (keyboard, mouse, memory stick, etc.) • connector for NRP power sensors for accurate power measurements • GPIB bus commands according to SCPI • R&S®SML GPIB command set compatible • operation via remote operation from any web-browser used, TESTED. CALIBRATION with 90 day WARRANTY. good cosmetic condition. You are buying the pictured item only Buyer may return the item and is responsible for shipping charges. tel: 877-417-7413 EBAY SALES TERMS AND CONDITIONS ***all Paypal purchases must deliver to a confirmed address*** The sale of all equipment described herein is conditioned upon the Terms and Conditions contained herein. Any additional or different terms that are proposed by the customer are hereby objected to and will not be binding upon Liberty Test Equipment unless specifically agreed to in writing by Liberty Test Equipment. Any order for or any statement of intent to purchase hereunder or any direction to deliver equipment shall constitute the customer's acceptance of all of Liberty Test Equipment's Terms and Conditions that are stated herein. SHIPMENT F.O.B. point is Liberty Test Equipment's Inventory Center from which the shipment is made. Shipment will be made at the customer's expense in accordance with Liberty Test Equipment's standard shipping and handling charges. The seller will not be responsible for damage to uninsured shipments. EXCUSABLE DELAYS Delivery dates are approximate. Liberty Test Equipment shall not be liable for delays in shipment due to causes beyond its reasonable control, including but not limited to acts of God, acts of the customer, acts of civil or military authority, governmental priorities, strikes, fires, floods, epidemics, war, riot, delays in transportation or car shortages, or inability because of any cause beyond the reasonable control of Liberty Test Equipment to obtain necessary materials, components, services or facilities. In the event of such delay, the date of the shipment shall be extended for a period equal to the time lost by reason of such delay. PAYMENT Payment shall be in advance of shipment. Liberty Test Equipment accepts Paypal, Visa, MasterCard, American Express, and Discover. All payments are to be made in U.S. dollars. CUSTOMER'S OBLIGATIONS The customer agrees to and shall be fully responsible for any loss of, or damage to, the equipment for any cause whatsoever. The customer shall pay all repair costs for any loss of, or damage to, the equipment. WARRANTY Liberty Test Equipment warrants this equipment to the customer for 90 days against any defective parts and for labor costs. Liberty Test Equipment also warrants that the equipment shall be shipped in good operating condition. However, if the shipped equipment is not in good working condition due to no fault of the customer, then the customer shall notify Liberty Test Equipment within three (3) days after receipt of the equipment. Liberty Test Equipment shall, at its option, either repair the equipment or supply replacement equipment subject to availability. The customer shall be responsible for shipping the equipment and paying the shipping costs back to Liberty Test Equipment, then Liberty Test Equipment shall then repair or replace the equipment, and pay shipping costs to provide the customer with repaired or replaced equipment. The foregoing warranty is in lieu and exclusive of all other warranties, whether express, implied or statutory, oral or written. Unless otherwise agreed in writing, Liberty Test Equipment does not warrant the merchantability of the components furnished or the equipment sold, or its fitness or suitability for any specific application or use. Liberty Test Equipment shall not be liable for any damage or losses regardless of reason or cause for its failure to discover, report, repair or modify latent defects or defects inherent in the design of the equipment. Any warranty and right of return explicitly included in the description for a specific listing supersedes the aforementioned warranty clause. FEEDBACK Liberty Test Equipment shall provide feedback after receiving the customer's feedback. Ebay relies on trust built by its users to ensure satisfactory and safe transactions in the future. With that said, negative feedback cuts both ways. We would be more than pleased to try to solve any issue that may have come up as a result of any equipment that you have purchased from us. Give us a chance and you will be pleased. The foregoing shall constitute the sole remedy of the customer and the sole liability of Liberty Test Equipment.