+ Post new Ad
Rohm 93439 Type 604H Basic Tool Steel Heavy Duty Revolving Tailstock Center, US $1,400.00 – Picture 0
Rohm 93439 Type 604H Basic Tool Steel Heavy Duty Revolving Tailstock Center, US $1,400.00 – Picture 1
Rohm 93439 Type 604H Basic Tool Steel Heavy Duty Revolving Tailstock Center, US $1,400.00 – Picture 2
Rohm 93439 Type 604H Basic Tool Steel Heavy Duty Revolving Tailstock Center, US $1,400.00 – Picture 0
Rohm 93439 Type 604H Basic Tool Steel Heavy Duty Revolving Tailstock Center, US $1,400.00 – Picture 1
Rohm 93439 Type 604H Basic Tool Steel Heavy Duty Revolving Tailstock Center, US $1,400.00 – Picture 2

Rohm 93439 Type 604h Basic Tool Steel Heavy Duty Revolving Tailstock Center

US $1,400.00

  • Buffalo, New York, United States
  • Jan 30th
Open on mobile:
QR code
Features Highly suitable for the use on copying lathes Body hardened and ground For additional supporting and guiding of workpieces as counter centre with face drivers For workpieces with small diameter Triple bearing method Description Rohm Type 604H basic revolving tailstock centres have been re-engineerd in function and design. Due to the new features they are even better in daily use and offer additional advantages. Heavy duty high speed revolving tailstock center with small casing diameter is highly suitable for the use on copying lathes. For additional supporting and guiding of workpieces as counter centre with face drivers. It has longer life due to splash water groove, improved lubrication, and close toleranced bearing seat. Lower interference shape due to slim housing, body hardened and ground, centre hardened, repeated regrinding at will, and triple bearing method. It has high runout accuracy and life-time lubrication. It has high concentricity. Reliable lip seal protects bearing space from ingress by dirt and coolant. Reduced friction and heating. High precision roller bearings. Big and secure supporting surface to ensure the complete axial bearing load. High-precision needle bearing. Drop-forged body with high-load capacity due to uniform fibre flow; hardened and ground. Head design with bevelling for unhindered approach of tool holder and lathe tools. Splash water groove as an additional protection against splash water penetration. Live centre is made of water-resistant tool steel, drop-forged and through-hardened to withstand repeated regrinding, shank-bedded. 60 degrees tip angle. 67mm tip length. 196mm overhang length. 60 millimeters point diameter. 1500 rpm speed. 138 millimeters body diameter. 0.01 millimeters concentricity deviation.

Directions

Similar products from Live Centers

SHARS Long Nose Spindle MT3 Morse Taper 3 Medium Duty Live Center 3MT .0002"

SHARS Long Nose Spindle MT3 Morse Taper 3 Medium Duty Live Center 3MT .0002"

  • Saint Charles, Illinois, United States
  • Jan 30th
SHARS 1MT 0.000197" LONG NOSE MORSE TAPER 1 LIVE CENTER MT1 BALL BEARING CNC

SHARS 1MT 0.000197" LONG NOSE MORSE TAPER 1 LIVE CENTER MT1 BALL BEARING CNC

  • Saint Charles, Illinois, United States
  • Jan 30th
SHARS MT5 LIVE CENTER MORSE TAPER MEDIUM DUTY TRIPLE BEARING 5 MT .00019"

SHARS MT5 LIVE CENTER MORSE TAPER MEDIUM DUTY TRIPLE BEARING 5 MT .00019"

  • Saint Charles, Illinois, United States
  • Jan 30th
SHARS MT5 MORSE TAPER 5 Long Nose Live Center Medium Duty Bearing 5MT .00019"

SHARS MT5 MORSE TAPER 5 Long Nose Live Center Medium Duty Bearing 5MT .00019"

  • Saint Charles, Illinois, United States
  • Jan 30th
USED ROHM LIVE CENTER MK2

USED ROHM LIVE CENTER MK2

  • San Bernardino, California, United States
  • Jan 30th
CONCENTRIC SPRING LOADED LIVE CENTER Morse Taper 4

CONCENTRIC SPRING LOADED LIVE CENTER Morse Taper 4

  • Reno, Nevada, United States
  • Jan 30th
Half dead center Royal Products 11033 4MT High speed steel NEW

Half dead center Royal Products 11033 4MT High speed steel NEW

  • Elon, North Carolina, United States
  • Jan 30th
J & S Precision Bull Nose Live Center with #4 MT Shank. For Grinding or Lathe

J & S Precision Bull Nose Live Center with #4 MT Shank. For Grinding or Lathe

  • Sellersville, Pennsylvania, United States
  • Jan 30th
Z LIVE CENTER 4MT HYDRAULIC FACE DRIVER MORSE TAPER No. 4 MT4 FOR LATHE

Z LIVE CENTER 4MT HYDRAULIC FACE DRIVER MORSE TAPER No. 4 MT4 FOR LATHE

  • Diamond Bar, California, United States
  • Jan 30th
Z LIVE CENTER 5MT 6" BULL NOSE LIVE CENTER MORSE TAPER #5 FOR LATHE

Z LIVE CENTER 5MT 6" BULL NOSE LIVE CENTER MORSE TAPER #5 FOR LATHE

  • Diamond Bar, California, United States
  • Jan 30th
RITEN #3 Morse Taper Dead Center

RITEN #3 Morse Taper Dead Center

  • Johnson City, New York, United States
  • Jan 30th
35 Mill Taper Dead Center Fits Cincinnati Cinturn Cin-Turn

35 Mill Taper Dead Center Fits Cincinnati Cinturn Cin-Turn

  • Flint, Michigan, United States
  • Jan 30th
35 Mill Taper Dead Center Fits Cincinnati Cinturn Cin-Turn 3646345

35 Mill Taper Dead Center Fits Cincinnati Cinturn Cin-Turn 3646345

  • Flint, Michigan, United States
  • Jan 30th
35 Mill Taper Dead Center Fits Cincinnati Cinturn Cin-Turn 3646473

35 Mill Taper Dead Center Fits Cincinnati Cinturn Cin-Turn 3646473

  • Flint, Michigan, United States
  • Jan 30th
35 Mill Taper Dead Center Fits Cincinnati Cinturn Cin-Turn 3646479

35 Mill Taper Dead Center Fits Cincinnati Cinturn Cin-Turn 3646479

  • Flint, Michigan, United States
  • Jan 30th
35 Mill Taper Interchangable Tip Dead Center Set Fits Cinturn Cin-Turn

35 Mill Taper Interchangable Tip Dead Center Set Fits Cinturn Cin-Turn

  • Flint, Michigan, United States
  • Jan 30th
USED MAHR .00005 PRECISION BENCH MICROMETER COMPARATOR

USED MAHR .00005 PRECISION BENCH MICROMETER COMPARATOR

  • Leland, Illinois, United States
  • Jan 30th
USED 5/8 HS DEAD CENTER

USED 5/8 HS DEAD CENTER

  • San Bernardino, California, United States
  • Jan 30th
Live center "Shoda"

Live center "Shoda"

  • Ontario, California, United States
  • Jan 30th
NEW HEAVY DUTY LIVE CENTER #1 TAPER SHANK FITS ATLAS CRAFTSMAN 6 INCH LATHE

NEW HEAVY DUTY LIVE CENTER #1 TAPER SHANK FITS ATLAS CRAFTSMAN 6 INCH LATHE

  • Niles, Michigan, United States
  • Jan 30th

People who viewed this item also vieved

10 X 8 X 6 INCH SLOTTED ANGLE PLATE (WEBBED) (3402-0310)

10 X 8 X 6 INCH SLOTTED ANGLE PLATE (WEBBED) (3402-0310)

  • Chino, California, United States
  • May 28th
4-1/2 X 3-1/2 X 3 INCH SLOTTED ANGLE PLATE (WEBBED (3402-0302)

4-1/2 X 3-1/2 X 3 INCH SLOTTED ANGLE PLATE (WEBBED (3402-0302)

  • Chino, California, United States
  • May 28th
Northwestern 33107P 1/4-20 x 1" HD Spring Plunger

Northwestern 33107P 1/4-20 x 1" HD Spring Plunger

  • Crystal Lake, Illinois, United States
  • May 28th
UNIMAT SL1000 / DB200 LATHE NOS E16 COLLET IN BOX 9/64"

UNIMAT SL1000 / DB200 LATHE NOS E16 COLLET IN BOX 9/64"

  • Hatboro, Pennsylvania, United States
  • May 29th
UNIMAT SL1000 / DB200 LATHE NOS E16 COLLET IN BOX 5/32"

UNIMAT SL1000 / DB200 LATHE NOS E16 COLLET IN BOX 5/32"

  • Hatboro, Pennsylvania, United States
  • May 29th
CRAFTSMAN 6" LATHE COLLET THREAD PROTECTOR 1" X 8 TPI

CRAFTSMAN 6" LATHE COLLET THREAD PROTECTOR 1" X 8 TPI

  • Hatboro, Pennsylvania, United States
  • May 29th
Swivel-Head MULTI ANGLE Vacu-Vise Model 400 TILTS 90 DEGREE SUPER CLEAN

Swivel-Head MULTI ANGLE Vacu-Vise Model 400 TILTS 90 DEGREE SUPER CLEAN

  • Philadelphia, Pennsylvania, United States
  • May 30th
INGERSOLL RAND #5 SPLINE IMPACT GUN LONG SHAFT 1800 LBS FT TORQUE

INGERSOLL RAND #5 SPLINE IMPACT GUN LONG SHAFT 1800 LBS FT TORQUE

  • Jericho, New York, United States
  • May 30th
Vertex VERTEX 3900-0314 Steel T-Slot Clamping Nut Kit, 4-piece, 7/16"

Vertex VERTEX 3900-0314 Steel T-Slot Clamping Nut Kit, 4-piece, 7/16"

  • USA, United States
  • May 30th
HHIP 3900-0202 Accu-Torque Vise Speed Handle for 6" Vises (Steel Hub)

HHIP 3900-0202 Accu-Torque Vise Speed Handle for 6" Vises (Steel Hub)

  • USA, United States
  • May 31st
Silverline 482489 4-Inch Soft Vise Jaws

Silverline 482489 4-Inch Soft Vise Jaws

  • USA, United States
  • May 31st
Yost Vises 2.5" Drill Press Vise w/ Swivel Base

Yost Vises 2.5" Drill Press Vise w/ Swivel Base

  • Oklahoma City, Oklahoma, United States
  • May 31st
Daishowa BIG PLUS Spindle System MEGA SYNCHRO TAPPING HOLDER

Daishowa BIG PLUS Spindle System MEGA SYNCHRO TAPPING HOLDER

  • Seattle, Washington, United States
  • May 31st
NICE Jacobs Chuck 0 - 3/8 inch or 0 - 10 mm Cap. # 1 Morse Tapper MT SUPER CHUCK

NICE Jacobs Chuck 0 - 3/8 inch or 0 - 10 mm Cap. # 1 Morse Tapper MT SUPER CHUCK

  • Mahwah, New Jersey, United States
  • May 31st
24" Abbot (Set of 3) Style M TG24MDP Aluminum Pie Jaws (DF)

24" Abbot (Set of 3) Style M TG24MDP Aluminum Pie Jaws (DF)

  • Dallas, Texas, United States
  • May 31st
TAPERED KEY PULLER (Gib Key Puller)

TAPERED KEY PULLER (Gib Key Puller)

  • Grafton, North Dakota, United States
  • Jun 9th
STARRETT Set Of Six Parallels:sizes A, B, C, D, E, F, in case

STARRETT Set Of Six Parallels:sizes A, B, C, D, E, F, in case

  • Flushing, New York, United States
  • Jun 9th
NICE LOT OF 7 T-SLOT BOLTS milling hold down 5/8" - 11 ARMSTRONG 4" - 5" Long

NICE LOT OF 7 T-SLOT BOLTS milling hold down 5/8" - 11 ARMSTRONG 4" - 5" Long

  • Rushville, Indiana, United States
  • Jun 9th
Machinist Steel Rectangular Blocks (2) Anton Mach. Wks.

Machinist Steel Rectangular Blocks (2) Anton Mach. Wks.

  • Cherry Hill, New Jersey, United States
  • Jun 9th
Machinist Steel Rectangular Blocks (2)

Machinist Steel Rectangular Blocks (2)

  • Cherry Hill, New Jersey, United States
  • Jun 9th
MATCHED PAIR PRECISION V-BLOCK & CLAMPS w/ WOOD CASE

MATCHED PAIR PRECISION V-BLOCK & CLAMPS w/ WOOD CASE

  • Erie, Pennsylvania, United States
  • Jun 9th
Troyke U18 18" Precision Rotary Table Horz/Vert Bridgeport Variable Speed Drive

Troyke U18 18" Precision Rotary Table Horz/Vert Bridgeport Variable Speed Drive

  • Granite Falls, Minnesota, United States
  • Jun 9th
HARTFORD Super Spacer 8” 3-Jaw Chuck 36 Divisions

HARTFORD Super Spacer 8” 3-Jaw Chuck 36 Divisions

  • Euclid, Ohio, United States
  • Jun 9th
Super Spacer 6” 3-Jaw Chuck 2 Masking Plates

Super Spacer 6” 3-Jaw Chuck 2 Masking Plates

  • Euclid, Ohio, United States
  • Jun 9th
Trendz Tunisian Crochet W/Interchangeable Head-Size M/9mm

Trendz Tunisian Crochet W/Interchangeable Head-Size M/9mm

  • Hickory Hills, Illinois, United States
  • Jun 15th
NEW STANLEY BACK NOSE BA-2011001200

NEW STANLEY BACK NOSE BA-2011001200

  • Clover, South Carolina, United States
  • Jun 15th
Whimsical Signs Ornaments Counted Cross Stitch Kit-14 Count Set Of 3

Whimsical Signs Ornaments Counted Cross Stitch Kit-14 Count Set Of 3

  • Hickory Hills, Illinois, United States
  • Jun 15th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies