Roland DWX-50 5 AXIS Dental Milling Machine, US $7400 – Picture 0

Roland DWX-50 5 AXIS Dental Milling Machine, US $7400 – Picture 1

Roland DWX-50 5 AXIS Dental Milling Machine, US $7400 – Picture 2

Roland Dwx-50 5 Axis Dental Milling Machine

US $7400

Tampa, Florida, United States
Jun 9th

Open on mobile:
QR code

The DWX-50 streamlines the production process with simultaneous 4 or 5-axis machining capabilities and a 5-station automatic tool changer. The well-made and well-tested mill is also compact, easy to set-up and easy to use. An integrated air blower system aids with difficult-to-machine materials such as PMMA or Zirconia, along with a built-in dust collection tray that can be easily connected to any high-velocity independent suction system. In addition to all of that, the DWX-50 Mill offers automatic calibration and easy maintenance. Key features: High quality machining of materials - the DWX-50 is ideal for milling wax, zirconia, and PMMA with a maximum machine speed of 3,600 mm/min and maximum spindle speed of 30,000 rpm 5-axis simultaneous machining - milling on X, Y and Z axes and rotating the blocks and discs of material 360 degrees in both clockwise and counterclockwise directions allowing for materials to be tilted forward and backward 20 degrees to support complex cuts. 5 Station Automatic Tool Changer - enables the user to run multiple tools for one job. The automatic tool changer will also verify that a tool was properly place back in the magazine, preventing mechanical failures. An integrated tool diagnostics feature will notify users if a tool was broken prior to completion. Built-in dust collection tray for easy connection to any vacuum system Air blower system to aid difficult to machine materials Innovative clamping system securely holds a wide variety of materials Open architecture design for easy integration into a complete milling solution Compatible with industry standard software TECHNICAL SPECIFICATIONS: CUTTABLE MATERIAL Zirconia (pre-sintered), wax, PMMA OPERATING SPEED X and Y axes: 0.24 to 141.73 in/min Z axes: 6 to 0.24 to 70.87 in/min (1800mm/min) SPINDLE MOTOR/SPINDLE SPEED Brushless DC motor, maximum 100W / 6,000 to 30,000 rpm NUMBER OF TOOLS HOUSED 5 REQUIRED TOOL DIMENSIONS Shank diameter: .16 (4mm), Length: 1.57 to 2.17in (40 to 55mm) VACUUM REQUIREMENTS 8 kPa Static Pressure or more VOLTAGE AC100 to 120 V/220 to 240V +/- 10%, 50/60 Hz REQUIRED POWER CAPACITY 2.8 A (100 to 120V) / 1.2 A (220 to240 V) POWER CONSUMPTION Approx. 275W OPERATING NOISE During Operation: 70 dB (A) or less (when not cutting) During Standby: 45dB (A) or less DIMENSIONS 25.9 W x 25.9 D x 22 H in (656 x 656 x 557mm) WEIGHT 110 lb (50 kg)