Roland MDX-540A Pro II 3D CNC Benchtop Milling Machine, US $24,790.00 – Picture 0

Roland MDX-540A Pro II 3D CNC Benchtop Milling Machine, US $24,790.00 – Picture 1

Roland MDX-540A Pro II 3D CNC Benchtop Milling Machine, US $24,790.00 – Picture 2

Roland MDX-540A Pro II 3D CNC Benchtop Milling Machine, US $24,790.00 – Picture 3

Roland MDX-540A Pro II 3D CNC Benchtop Milling Machine, US $24,790.00 – Picture 4

Roland MDX-540A Pro II 3D CNC Benchtop Milling Machine, US $24,790.00 – Picture 5

Roland MDX-540A Pro II 3D CNC Benchtop Milling Machine, US $24,790.00 – Picture 6

Roland MDX-540A Pro II 3D CNC Benchtop Milling Machine, US $24,790.00 – Picture 7

Roland MDX-540A Pro II 3D CNC Benchtop Milling Machine, US $24,790.00 – Picture 8

Roland MDX-540A Pro II 3D CNC Benchtop Milling Machine, US $24,790.00 – Picture 9

Roland MDX-540A Pro II 3D CNC Benchtop Milling Machine, US $24,790.00 – Picture 10

Roland MDX-540A Pro II 3D CNC Benchtop Milling Machine, US $24,790.00 – Picture 11

Roland Mdx-540a Pro Ii 3d Cnc Benchtop Milling Machine

US $24,790.00

Morro Bay, California, United States
Jan 30th

Open on mobile:
QR code

OK - my mistake! I was stupid to start the last auction at $200. Sorry! This is an expensive machine. It's not going to sell cheap. This time it's a no reserve auction starting at about $15,570 less than you'll pay for a new machine. AND - this one IS new. AND - this is the best machine in its class. If you're doing 3D modelling, it's the best. Brand NEW $32,000 machine! If your sales tax is 8%, without shipping that will be $34,560 from a Roland distributor. Again - this auction is starting at $15,570 BELOW that! Buy-It-Now price is $9770 below new price! This machine was NEVER set up or turned on. It has been sitting on a dedicated bench in my office, inside the house. Tool spindles still in original plastic packing. I'm SACRIFICING this machine. From the Roland website: LIST PRICE MDX-540: $20,995 US MDX-540A: $31,995 US MDX-540S: $26,995 US MDX-540SA: $36,995 US * U.S. only. For Canada, Latin America and Caribbean pricing, please call (949) 727-2100, or contact an Authorized Roland Dealer in your area. This machine has the Automatic Tool Changer. It does not have the 4th axis. That's an add-on item. (see accessory list below) Don't bid if you can't follow through. This cannot be shipped out of the country so don't bid if you're not in the USA. See below about local pickup or freight shipment. click here good video with ATC click for Roland's online brochure .pdf From the Roland site: Any way you look at it - the MDX-540 Subtractive Rapid Prototyping (SRP®) System is a winner. One of the fastest and most accurate rapid prototype machines on the market, the MDX-540 has a price tag that is less than half the cost of most additive systems. A 4-axis desktop CNC device, the MDX-540 is complete with powerful CAM software that quickly and easily produces everything from functional and snap-fit parts and prototypes to light metal molds and custom jewelry. SUMMARY Rapid prototyping and manufacturing technology:Creates accurate prototypes for complex snap-fits Produces functional prototypes for proof of concept and manufacturability testing Achieves smooth surface finish across a wide range of materials 400W DC Brushless motor with increased torque for fast, accurate prototypes Includes user-friendly CAM Software Handheld controller and virtual control panel simplifies setup Specialty MDX-540S and MDX-540SA models available for enhanced precision and accurate, repeatable production Optional fourth rotary axis and automatic tool changer available Maximum 19.68" by 15.74" by 6.10" XYZ-Axis Travel MODEL MDX-540A MDX-540SA Usable Materials Plastic, resin, wood and non-ferrous metals XYZ-Axis Travel 15.7(X) x 15.7(Y) x 6.1"(Z)[400 (X) x 400 (Y) x 155 mm (Z)] Loadable workpiece size with optional rotary axis (ZCL-540) * 7.0” Diameter x 14.6” Length [177.8mm Diameter x 370.8mm Length] Actual milling area is smaller Distance From Spindle Nose to Table Maximum 10" (254mm) Table Size 21.7(W) x 16.5"(D) [550(W) x 420mm (D)] Loadable workpiece weight At acceleration of 0.2G: maximum 26lb (12kg), 0.1G: 44lb (20kg), 0.05G: 44lb (20kg) XYZ-axis drive system AC servo motor, 60W AC servo motor, 80W Operating speed Maximum 295ipm (7.5m/min) Acceleration 0.2G, 0.1G, 0.05G Software resolution RML-1 mode: 0.0004"(0.01mm ), NC-code mode: 0.00004" (0.001mm) Mechanical resolution 0.00004” (0.001mm) Positioning accuracy +/-0.004"/12"(+/-0.1mm/300mm), under no-load conditions Repeat accuracy +/-0.0019"(+/-0.05mm), under no-load conditions +/-0.0008"(+/-0.02mm), under no-load conditions Origin reproducibility (when the power is switched on/off) +/-0.0019" (+/-0.05mm) +/-0.0008" (+/-0.02m) Spindle motor DC brushless motor, maximum 400W Spindle speed 400 to 12,000 rpm; 400 to 3,000 rpm for positioning and centering Tool chuck Tool holder format, Taper shank: JBS4002 15T Control command sets RML-1 and NC codes Interface USB (compliant with Universal Serial Bus Specification Revision 1.1) Power supply Voltage and frequency: AC 100 to 120 V/220 to 240 V +/-10%, 50/60 Hz Required power capacity: 7A (100 to 120V)/4A (220 to 240V) Power consumption Approx. 700W Acoustic noise level During operation (no cutting): 65dB (A) or less, during standby: 40dB (A) or less (according to ISO 7779) Dimensions Width x depth x height: 29.3 x 37.6 x 33.8" (745 x 955 x 858mm) Width x depth x height: 30.1 x 37.6 x 33.8" (765 x 955 x 858mm) Weight 249lb (109kg) Operating temperature 41 to 104F (5 to 40C) Operating humidity 35 to 80% (no condensation) again, the following list is from the Roland site: This shows what is available from Roland, NOT WHAT'S INCLUDED IN THIS AUCTION. Milling accessory list Part No. Description Price EM-KIT-LR Long Reach Tool Kit $379.99 EM-KIT-SR Short Reach Tool Kit $143.99 EMB-125-2F-016 .016" Ball End Mill $35.99 EMB-125-2F-016L .016" Ball End, Mill Long $38.99 EMB-125-2F-031 .031" Ball End Mill $16.49 EMB-125-2F-031L .031" Ball End Mill Long $38.99 EMB-125-2F-063 .063" Ball End Mill $16.49 EMB-125-2F-125 .125" Ball End Mill $16.49 EMB-125-2F-125L .125" Ball End Mill Long $38.99 EMB-250-2F-250L .250" Ball End Mill Long $43.49 EMF-125-2F-016 .016" Flat End Mill $27.99 EMF-125-2F-016L .016" Flat End Mill Long $38.99 EMF-125-2F-031 .031" Flat End Mill $14.49 EMF-125-2F-031L .031" Flat End Mill Long $38.99 EMF-125-2F-063 .063" Flat End Mill $14.49 EMF-125-2F-063L .063" Flat End Mill Long $38.99 EMF-125-2F-125 FLAT END MILL, .125" SHANK, 2 FLUTE, .125"TIP $16.49 EMF-125-2F-125L .125" Flat End Mill Long $38.99 EMF-250-2F-250L .250in Flat End Mill Long $43.49 TAPE-MILLING Double Sided Tape for Milling $10.49 US-COL7-1/4 1/4in ATC Collet for 7mm Drill Mill Chuck $59.99 US-COL7-1/8 1/8in ATC Collet for 7mm Drill Mill Chuck $59.99 US-COL7-5 5mm & 3/16" ATC Collet for 7mm Drill Mill Chuck $59.99 US-DMC7-48 7mm Drill Mill Chuck, Tool Holder for ATC $359.99 US-EY16-10A EY-Collet Chuck 9.0-10.0mm MDX-500/650 $81.99 US-EY16-3.5A EY-Collet Chuck 3.0-3.5mm MDX-540 $81.99 US-EY16-5A EY-Collet Chuck 4.0-5.0mm MDX-540 $81.99 US-EY16-7A EY-Collet Chuck 6.0-7.0mm MDX-500/650 $81.99 US-SC15 Drill Mill Chuck Tool Setting Clamp ATC (MDX-540/650) $514.99 US-SPAN22 Spanner for 7mm Drill Mill Chuck $15.49 ZBX-540E Safety Cover for MDX-540 $1,539.00 ZCL-540 Rotary Axis Unit for MDX-540 $5,099.00 ZTT-540 T-Slot Table for MDX-540 $1,399.00 PLEASE don't hesitate to contact me if you have questions or concerns. Notes about payment: PayPal cannot process this entire transaction. PayPal will be only for the deposit. I highly recommend using the eBay Escrow Services at www.escrow.com An immediate deposit via PayPal of $750 will be required. Notes about shipping: Buyer pays all shipping costs. This item must be properly crated and shipped via freight. I have a local company who can arrange all of that. Local pickup ok but you'll need two or three strong people to move it out of the house. Local payment needs to be cash or certified bank check. On Nov-21-14 at 09:31:36 PST, seller added the following information: Buyer and Seller to split escrow fees.

Condition	New other (see details) : A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“This machine is not in original packaging but has never been set up or turned on.”