Roll Marking Machine Numberall 301c Pneumatic For Round / Cylindraical Parts

US $180

Providence, Rhode Island, United States
May 30th

Open on mobile:
QR code

Important Bidding /Buying Information Related To This Listing; We Have Done Our Best To Describe It In Detail ;However, This Is A Used Item And In Our Opinion A Good One ;However, Opinions Can & Will Differ On Occasion And Because Of This We Ask That You Be 100% Sure You Know What Your Buying & What To Expect When It Arrives Even Though The Machine Looks Good It Is Used So We Prefer And/Or Strongly Recommend You Visit & Inspect It Yourself In Person ;However,Should This Not Be Possible Or Practical Please Review The Photos & Ask As Many Questions As Possible So You Know What To Expect When It Arrives !!! Notice ; This Has Been ,Inspected And Tested For It's Function Only ...We Can Not & Do Not Determine If It Meets Any And/Or All Safety Issues And/Or Concerns With Regards To The Machine, It's Installation ,Operation & Safe Guarding. Any And/Or All Issues Or Concerns With Regards Safety Are The Buyers Sole Responsibility And By Purchasing This Machine You Are Agreeing And Accepting The Terms Above Machine Details & Specifications (1) Pre-Owned /Used Numberall Model 301-C Pneumatic Roll Marking Machine For (Round) Cylindrical Parts Complete W/ Bench & 2 Hand Pushbutton Controls Electrical - 110 volts (For Controls Only) Shop Air Required - 80PSI +/- Overall Size - 24"x36"x46" +/- W/O Roller Cart Works Great ....See Below For Additional Spec's The Model 301A uses an air cylinder for power. It is better suited for high production applications. Once the round part is placed in the adjustable holding fixture, the operator simply actuates the air valve and the cylinder extends the marking device part. The marking device (one of our Numbering Heads, Type Holders, or Marking Dies) is pulled across the part. The part rotates in the fixture as the code is stamped around the part, all in one motion.At the end of the stroke, the cylinder stops. Remove the part, place another part in the fixture, reverse the air valve and the marking device is actuated in the opposite direction. An optional two-hand trip is available, instead of our standard valve. An adjustment knob on the sliding head dovetail provides positive depth adjustment. A special rectangular shank is required to adapt the marking device to the sliding head. When setting up, place a part in the fixture, move the sliding head over the part. Turn the adjustment knob until the marking device touches the part. Move the sliding head to one side and turn the adjustment knob 1/4 of a turn. Mark a part and check for stamping depth. Move the adjustment knob in or out for proper stamping depth. Brass gibs on the dovetail and sliding head can be adjusted for wear and also to tilt the marking device to correct for any part taper. Compatibility Numberall's Marking Devices that are compatible* with the Model 301: Model 23P Type Holder (with multiple lines, if required)** Model 70P Non-Automatic Numbering Head Model 50P Automatic Numbering Head Special Dies Generally with a Model 23P Type Holder and our standard adjustable holding fixture, you can mark parts from 3/8” to 1-5/8” diameter. We offer oversize endplates for more clearance, by requesting the Oversize Roll Marking Machine. The first oversize endplates will give an additional 2-1/8” of clearance, the second over size an additional 4-1/4” of clearance. *Compatibility is based on character size, number of lines and type of material. **It is best to obtain sample stampings for multiple line applications. *Numberall has designed fixtures to stamp the edges of coins and medallions without marring the surfaces. We also have fixtures with interchangeable arbors for stamping hollow parts or rings. For parts with varying part diameters or stepped parts, our standard adjustable holding fixture rollers can be modified to hold the part securely when marking. Product Specs NOTE: Air cylinder draws the sliding head with marking device attached. Vertical Head Adjustment 1-3/4" Lateral Sliding Head Movement 5-1/2" Bench Space (WxLxH) 10-1/2" x 26" x 18-1/2" (Machine Only) Weight 92 lbs. (Machine Only) W/Bench 250+/- Platform Area 7-1/2" x 11" Maximum Clearance (between vertical slide head and platform) 5-3/4" Great overall and operating condition ,checked and cycled ,Ready To Use ! Important Safety Notice ...There are no safety devices or E-stops on this machine and there are no safe guards to protect the operator ,upgrades are required and should you purchase this your assuming the responsibility for any and all safety upgrades needed. Please ask any and all questions as early as possible so we an answer in time for you to bid. ***Should You Need Help Getting Good Rate Please Give Us Your Zip Code and Let Us Know If It's A Residential Delivery And Will A Lift-gate Be Required And We Will Get You The Best Possible Shipping Rate Additional & Optional After Sale Services Packing/Skidding .....$145. Packing /Crating (Skeleton) ......$295. Typical Minimum Trucker Requirements Needed To Obtain The Best Rates Other Options Would Be Open Top Flat Bed Truck ,Strapped & Covered ...Or if you wish; Pick It Up Yourself,No Charge For Loading Brenda & Cliff Davis Davis Machinery LLC 401-225-9582