+ Post new Ad
Rotary Table 3" /80mm mm Horizontal - Vertical Milling Metalworking, US $99.32 – Picture 0
Rotary Table 3" /80mm mm Horizontal - Vertical Milling Metalworking, US $99.32 – Picture 0

Rotary Table 3" /80mm Mm Horizontal - Vertical Milling Metalworking

US $99.32

  • Delhi, Delhi, India
  • Jul 7th
Open on mobile:
QR code
Rotary Table 3" 80mm Horizontal Vertical Model Milling Machine 4 Slots Product details : The Metal : High quality 18 Gauge Mild Iron steel with Brass Accents. THIS NEAT LITTLE ROTARY TABLE, WITH A DIAMETER OF 100MM, CAN BE USED FOR A VARIETY OF MILLING, DRILLING AND MARKING OUT OPERATIONS IN THE HOME ENGINEER'S WORKSHOP. THERE ARE FOUR TEE SLOTS FOR SECURING THE WORK, FACES MACHINED AT RIGHT ANGLES FOR HORIZONTAL AND VERTICAL MOUNTING AND 7MM SLOTS FOR SECURING TO THE MACHINE TABLE. THE INDEXING HANDLE, WHICH ROTATES ONCE FOR EVERY TEN DEGREES OF TABLE ROTATION, IS SUBDIVIDED IN DEGREES AND QUARTER DEGREES. THE CENTRE HEIGHT WHEN MOUNTED VERTICALLY IS 40MM. SUPPLIED WITH WORK CLAMPING KIT. VERTICAL AND HORIZONTAL MOUNTING TEE SLOTS FOR SECURING WORK WHEEL MARKED IN DEGREES AND QUARTER DEGREES Description: A Precision work positioning device used in metalworking, enabling the operator to drill or cut work at exact intervals around a fixed axis. Rotary tables are most commonly mounted "flat", with the table rotating around a vertical axis, in the same plane as the cutter of a vertical milling machine. An alternate setup is to mount the rotary table on its end (or mount it "flat" on a 90° angle plate), so that it rotates about a horizontal axis. In this configuration a tailstock can also be used, thus holding the work piece "between centers."
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Country/Region of Manufacture India
MPN Does Not Apply
Setting Position Horizontal/Vertical
Brand Unbranded
UPC Does not apply

Directions

Similar products from Rotating Tables

Clamp Kit Set for Rotary Table-Milling M6 CLAMP KIT (6mm)..

Clamp Kit Set for Rotary Table-Milling M6 CLAMP KIT (6mm)..

  • Delhi, Delhi, India
  • Jul 8th
UTOPH - 81 AWF INCREMENTAL ENCODER

UTOPH - 81 AWF INCREMENTAL ENCODER

  • South Windsor, Connecticut, United States
  • Jul 8th
Yuasa Rotating Table 10"

Yuasa Rotating Table 10"

  • Waukegan, Illinois, United States
  • Jul 8th
Dividing Head 5 Inch 3 Jaw Precision Semi for Milling Machine Rotary Axis Table

Dividing Head 5 Inch 3 Jaw Precision Semi for Milling Machine Rotary Axis Table

  • Shenzhen, China
  • Jul 8th
Haas Servo Control. Condition Unknown. Item being sold as-is.

Haas Servo Control. Condition Unknown. Item being sold as-is.

  • Oviedo, Florida, United States
  • Jul 7th
Milling Machine 3 Slots 6In 150mm Horizontal Vertical Rotary Table

Milling Machine 3 Slots 6In 150mm Horizontal Vertical Rotary Table

  • Lithia Springs, Georgia, United States
  • Jul 7th
4In 100mm 4 Slots for Milling Machine Horizontal Vertical Rotary Table

4In 100mm 4 Slots for Milling Machine Horizontal Vertical Rotary Table

  • Lithia Springs, Georgia, United States
  • Jul 7th
4" 100mm Rotary Table With 4" Round Vise Vice Fixing T Nuts METALWORKING MILLING

4" 100mm Rotary Table With 4" Round Vise Vice Fixing T Nuts METALWORKING MILLING

  • DELHI, DELHI, India
  • Jul 7th
Brand New Rotary Table 3" inch - 75mm Horizontal & Vertical Model Machine Tools

Brand New Rotary Table 3" inch - 75mm Horizontal & Vertical Model Machine Tools

  • DELHI, DELHI, India
  • Jul 7th
100mm 4" ROUND VICE FOR VERTICAL SLIDE ROTARY TABLE VICE CAST IRON

100mm 4" ROUND VICE FOR VERTICAL SLIDE ROTARY TABLE VICE CAST IRON

  • DELHI, DELHI, India
  • Jul 7th
Machifit CNC Router Rotational Rotary Axis CNC Machine Accessory Tailstock for 4

Machifit CNC Router Rotational Rotary Axis CNC Machine Accessory Tailstock for 4

  • Shenzhen, Hong Kong , China
  • Jul 7th
Fibro rotary planet table FIBROPLAN 1.04.0500.1.1.14.01

Fibro rotary planet table FIBROPLAN 1.04.0500.1.1.14.01

  • Athens, default, Greece
  • Jul 7th
Fadal VH65 4th Axis Rotary Table with Tailstock (New Servo Motor)

Fadal VH65 4th Axis Rotary Table with Tailstock (New Servo Motor)

  • Stone Mountain, Georgia, United States
  • Jul 7th
HAAS 1.250 ID CNC Lathe Turret Boring Bar Tool Holder

HAAS 1.250 ID CNC Lathe Turret Boring Bar Tool Holder

  • Oxnard, California, United States
  • Jul 7th
HAAS 1.00 ID CNC Lathe Turret Boring Bar Tool Holder

HAAS 1.00 ID CNC Lathe Turret Boring Bar Tool Holder

  • Oxnard, California, United States
  • Jul 7th
Palmgren 6 x 10 Dual Cross Slide Milling Drilling Table - Excellent Condition!

Palmgren 6 x 10 Dual Cross Slide Milling Drilling Table - Excellent Condition!

  • Klamath Falls, Oregon, United States
  • Jul 6th
3900-2328 Horizontal/Vertical Rotary Table 8

3900-2328 Horizontal/Vertical Rotary Table 8

  • Joliet, Illinois, United States
  • Jul 6th
Vertex Universal Indexing /Dividing Head Milling Machine Attachment

Vertex Universal Indexing /Dividing Head Milling Machine Attachment

  • Granger, Indiana, United States
  • Jul 6th
CARROLL DIVIDING HEAD 7 DISC SET. See details below.

CARROLL DIVIDING HEAD 7 DISC SET. See details below.

  • Lake Zurich, Illinois, United States
  • Jul 6th
Indexing /Dividing Head Milling Machine Attachment W Cushman Chuck

Indexing /Dividing Head Milling Machine Attachment W Cushman Chuck

  • Granger, Indiana, United States
  • Jul 6th

People who viewed this item also vieved

CHALLENGE BLOCKS LH 101 10 X 8 X 6

CHALLENGE BLOCKS LH 101 10 X 8 X 6

  • Baldwinville, Massachusetts, United States
  • Jan 30th
Brown and Sharpe V-Block #750-C (Inv.30707)

Brown and Sharpe V-Block #750-C (Inv.30707)

  • Portland, Connecticut, United States
  • Jan 30th
NICE!! L.S. STARRETT V-BLOCKS & CLAMPS SET - #568C

NICE!! L.S. STARRETT V-BLOCKS & CLAMPS SET - #568C

  • Pomona, California, United States
  • Jan 30th
Z LIVE CENTER 4MT HYDRAULIC FACE DRIVER MORSE TAPER No. 4 MT4 FOR LATHE

Z LIVE CENTER 4MT HYDRAULIC FACE DRIVER MORSE TAPER No. 4 MT4 FOR LATHE

  • Diamond Bar, California, United States
  • Jan 30th
J & S Precision Bull Nose Live Center with #4 MT Shank. For Grinding or Lathe

J & S Precision Bull Nose Live Center with #4 MT Shank. For Grinding or Lathe

  • Sellersville, Pennsylvania, United States
  • Jan 30th
Half dead center Royal Products 11033 4MT High speed steel NEW

Half dead center Royal Products 11033 4MT High speed steel NEW

  • Elon, North Carolina, United States
  • Jan 30th
ER25 BT30 SPRING COLLET HOLDER CHUCK CNC MILLING LATHE TOOL & WORKHOLDING #B50

ER25 BT30 SPRING COLLET HOLDER CHUCK CNC MILLING LATHE TOOL & WORKHOLDING #B50

  • Hong Kong, Hong Kong
  • Jan 30th
ER11 MT1 MK1 M6 SPRING COLLET CHUCK CNC MILLING LATHE TOOL & WORKHOLDING NEW A13

ER11 MT1 MK1 M6 SPRING COLLET CHUCK CNC MILLING LATHE TOOL & WORKHOLDING NEW A13

  • Hong Kong, Hong Kong
  • Jan 30th
ER20 25MM 150MM LONG SHANK CHUCK CNC MILLING LATHE TOOL & WORKHOLDING #F94

ER20 25MM 150MM LONG SHANK CHUCK CNC MILLING LATHE TOOL & WORKHOLDING #F94

  • Hong Kong, Hong Kong
  • Jan 30th
Lot of 6 Toolmakers Parallel Machinist Clamps Lufkin 910-D Vulcan 304

Lot of 6 Toolmakers Parallel Machinist Clamps Lufkin 910-D Vulcan 304

  • Indianapolis, Indiana, United States
  • Jan 30th
VTG C-Clamps: Cincinnati Tool Co, E.C. Stearns, and J.H. Williams Clamp USA Made

VTG C-Clamps: Cincinnati Tool Co, E.C. Stearns, and J.H. Williams Clamp USA Made

  • Union Grove, Wisconsin, United States
  • Jan 30th
5x Horizontal Quick Release Hand Tool Toggle Clamps 201C M GAU

5x Horizontal Quick Release Hand Tool Toggle Clamps 201C M GAU

  • Hongkong, Hong Kong
  • Jan 30th
BIG COMPRESSION TENSION TAPPING COLLET CHUCK T52 AU 1-1/2 FT (LOC1127B)

BIG COMPRESSION TENSION TAPPING COLLET CHUCK T52 AU 1-1/2 FT (LOC1127B)

  • Laingsburg, Michigan, United States
  • Jan 30th
BIG COMPRESSION TENSION TAPPING COLLET CHUCK T52 AU2FT (LOC1127A)

BIG COMPRESSION TENSION TAPPING COLLET CHUCK T52 AU2FT (LOC1127A)

  • Laingsburg, Michigan, United States
  • Jan 30th
Pneumatic Collet Chuck Spindle Assembly for EMCO EMCOTURN 425 CNC LATHE

Pneumatic Collet Chuck Spindle Assembly for EMCO EMCOTURN 425 CNC LATHE

  • San Diego, California, United States
  • Jan 30th
TECNARA 235-012-L TAP HOLDER B35

TECNARA 235-012-L TAP HOLDER B35

  • Grover, Missouri, United States
  • Jan 30th
HUGE MEGA LOT Hex Collet Centaur RDF RDG RD/ER RDA METALWORKING TOOLS BITS

HUGE MEGA LOT Hex Collet Centaur RDF RDG RD/ER RDA METALWORKING TOOLS BITS

  • Cleveland, Ohio, United States
  • Jan 30th
8 MIXED BIG STRAIGHT COLLETS, AC42-6, AC42-10, AC42-12, AC42-20, AC42-32

8 MIXED BIG STRAIGHT COLLETS, AC42-6, AC42-10, AC42-12, AC42-20, AC42-32

  • Euclid, Ohio, United States
  • Jan 30th
LAPPING PLATE / MACHINIST TOOL FIXTURE - 7" x 5-1/4" x 1-1/2"

LAPPING PLATE / MACHINIST TOOL FIXTURE - 7" x 5-1/4" x 1-1/2"

  • Chino, California, United States
  • Jan 30th
ACCUPRO 5C 1/32" x 1-1/8" Manual Horizontal Vertical Collet Holding Fixture 11K

ACCUPRO 5C 1/32" x 1-1/8" Manual Horizontal Vertical Collet Holding Fixture 11K

  • Saint Louis, Missouri, United States
  • Jan 30th
Machinist Parallel Set (Carbide Tipped Top & Bottom + All Ground Body & Guides)

Machinist Parallel Set (Carbide Tipped Top & Bottom + All Ground Body & Guides)

  • Ukraine, Ukraine
  • Jan 30th
LED Work Light W/Magnetic Base 20" Reach-NEW

LED Work Light W/Magnetic Base 20" Reach-NEW

  • Chino, California, United States
  • Jan 30th
Taft-Peirce Right Angle Iron 16" X 8" Machinist Angle Iron Straight Edge

Taft-Peirce Right Angle Iron 16" X 8" Machinist Angle Iron Straight Edge

  • Goshen, Indiana, United States
  • Jan 30th
6 PC RECORD CATALOG E.2 & PRICE LISTS & CORRESPONDENCE GROUP #RR340 vise cutter

6 PC RECORD CATALOG E.2 & PRICE LISTS & CORRESPONDENCE GROUP #RR340 vise cutter

  • Perth, Ontario, Canada
  • Jan 30th
Machine vice

Machine vice

  • Damascus, Maryland, United States
  • Jan 30th
LARGE ANTIQUE BLACKSMITH PEG/POST LEG VISE 180 LBS 6.5" JAWS 41" TALL WILL SHIP

LARGE ANTIQUE BLACKSMITH PEG/POST LEG VISE 180 LBS 6.5" JAWS 41" TALL WILL SHIP

  • Canyon Lake, Texas, United States
  • Jan 30th
2-3/8'' Precision Toolmakers Vise Hardened .0002'', #0235-0310

2-3/8'' Precision Toolmakers Vise Hardened .0002'', #0235-0310

  • TORONTO, ONTARIO, Canada
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies