+ Post new Ad
ROTARY TABLE 3"/80MM WITH ER-16 COLLET ADAPTER FOR INSTANT MILLING MACHINE, C $100.99 – Picture 0
ROTARY TABLE 3"/80MM WITH ER-16 COLLET ADAPTER FOR INSTANT MILLING MACHINE, C $100.99 – Picture 0

Rotary Table 3"/80mm With Er-16 Collet Adapter For Instant Milling Machine

C $100.99

  • DELHI, DELHI, India
  • Jul 23rd
Open on mobile:
QR code
ROTARY TABLE 3"/80MM WITH ER-16 COLLET ADAPTER FOR INSTANT MILLING MACHINE * A Precision Small low profile Rotary Table for Milling operation with Table Diameter - 3 Inches (75 mm) * Height - 38 mm ( Only the Rotary Table)  * Worm- Gear Ratio - 36:1, which basically means that the 1 rotation of the handle shall rotate the table by 10 degrees.  * Table scale is calibrated in 5 degree increement.  * Can be used both in horizontal & vertical position.  * Supplied with a ER 16 Collet Adapter that can be mounted directly on the rotary table.  The base plate has a spigot extension to guide into the center of the table in order to achieve higher accuracies. * Base plate is drilled in a manner that it can fit both 3 as well as 4 slot rotary table
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Unbranded
MPN Does Not Apply
UPC Does not apply

Directions

Similar products from Rotating Tables

Expert Tunkers EGD125/1002/6 rotary table

Expert Tunkers EGD125/1002/6 rotary table

  • Athens, Greece
  • Jul 24th
Haas Indexer Control Box Only 17 Pin HA5C SC01M Servo Control Works great

Haas Indexer Control Box Only 17 Pin HA5C SC01M Servo Control Works great

  • Stafford Springs, Connecticut, United States
  • Jul 24th
Air bearing test rate table Fecker high capacity aerospace

Air bearing test rate table Fecker high capacity aerospace

  • Morgantown, Pennsylvania, United States
  • Jul 23rd
YUASA TPDX-132 5C DUAL HEAD PNEUMATIC AIR ROTARY

YUASA TPDX-132 5C DUAL HEAD PNEUMATIC AIR ROTARY

  • Costa Mesa, California, United States
  • Jul 23rd
HHIP 3906-2407 3.66-4.92" Adjustable Tailstock for 6-8" Rotary Tables

HHIP 3906-2407 3.66-4.92" Adjustable Tailstock for 6-8" Rotary Tables

  • Phoenix, Arizona, United States
  • Jul 23rd
Sherline 3725 Rotary Table 5" Tooling Plate

Sherline 3725 Rotary Table 5" Tooling Plate

  • Santa Ana, California, United States
  • Jul 23rd
Machifit CNC Router Rotational Rotary Axis CNC Machine Accessory Tailstock for 4

Machifit CNC Router Rotational Rotary Axis CNC Machine Accessory Tailstock for 4

  • Guangzhou, China, China
  • Jul 23rd
WESTWARD 45JW44 Brake Cylinder Hone,1 pc.,No Sockets

WESTWARD 45JW44 Brake Cylinder Hone,1 pc.,No Sockets

  • Minooka, Illinois, United States
  • Jul 23rd
WESTWARD 45FF52 Engine Cylinder Hone,Steel

WESTWARD 45FF52 Engine Cylinder Hone,Steel

  • Minooka, Illinois, United States
  • Jul 23rd
3 Speeds Electric Rotating Display Stand Mirror 360 Degree Display Stand Base

3 Speeds Electric Rotating Display Stand Mirror 360 Degree Display Stand Base

  • sz, China
  • Jul 23rd
Rotary Table 4" 100mm Horizontal Vertical MT2 Bore Model Milling Machine 3 Slot/

Rotary Table 4" 100mm Horizontal Vertical MT2 Bore Model Milling Machine 3 Slot/

  • DELHI, DELHI, India
  • Jul 23rd
DAYTON 2LKR3 Milling Machine Stand

DAYTON 2LKR3 Milling Machine Stand

  • Minooka, Illinois, United States
  • Jul 23rd
TILTING ROTARY TABLE 3"/75 MM WITH 3"/75 MM ROTARY VICE

TILTING ROTARY TABLE 3"/75 MM WITH 3"/75 MM ROTARY VICE

  • Delhi, India
  • Jul 22nd
ROTARY TABLE 3"/75 MM WITH 3"/75 MM ROTARY VICE {horizontally & vertically}

ROTARY TABLE 3"/75 MM WITH 3"/75 MM ROTARY VICE {horizontally & vertically}

  • Delhi, India
  • Jul 22nd
Rotab brand 36" rotary table with tilt Model 36-2

Rotab brand 36" rotary table with tilt Model 36-2

  • Cincinnati, Ohio, United States
  • Jul 22nd
TSUDAKOMA - RNA-250R - 10'' Rotary Table

TSUDAKOMA - RNA-250R - 10'' Rotary Table

  • Kirkland, Washington, United States
  • Jul 22nd
Ellis dividing disc #4 has circles of holes 25, 61 ,71 ,83 ,91, & 93

Ellis dividing disc #4 has circles of holes 25, 61 ,71 ,83 ,91, & 93

  • Lake Zurich, Illinois, United States
  • Jul 22nd
ACCURA VERTEX ARTC-008 6" 3 JAW CHUCK FOR 8" 4 SLOT ROTARY TABLE-2 SETS OF JAWS

ACCURA VERTEX ARTC-008 6" 3 JAW CHUCK FOR 8" 4 SLOT ROTARY TABLE-2 SETS OF JAWS

  • Beaver Falls, Pennsylvania, United States
  • Jul 21st
Montgomery & Company 90 Degree Tilt 360 Degree Rotation Tilt Table for Vice

Montgomery & Company 90 Degree Tilt 360 Degree Rotation Tilt Table for Vice

  • Pottstown, Pennsylvania, United States
  • Jul 21st
8" Rotary Cross Slide Table

8" Rotary Cross Slide Table

  • Pottstown, Pennsylvania, United States
  • Jul 21st

People who viewed this item also vieved

Mitee-Bite Kopal Standard Duty Mono-Block Riser Block 25710 NEW |36A| FRA

Mitee-Bite Kopal Standard Duty Mono-Block Riser Block 25710 NEW |36A| FRA

  • Saint Louis, Missouri, United States
  • Jan 30th
VTG.. STARRETT TOOL POST HOLDER

VTG.. STARRETT TOOL POST HOLDER

  • Oak Lawn, Illinois, United States
  • Jan 30th
SUBURBAN AB-HLF 1/2 DEGREE BLOCK

SUBURBAN AB-HLF 1/2 DEGREE BLOCK

  • Flushing, New York, United States
  • Jan 30th
NEW ATLAS CRAFTSMAN 101 618 6 INCH LATHE #1 MORSE TAPER DEAD CENTER HARDENED NEW

NEW ATLAS CRAFTSMAN 101 618 6 INCH LATHE #1 MORSE TAPER DEAD CENTER HARDENED NEW

  • Niles, Michigan, United States
  • Jan 30th
MACHINIST TOOLS – CONCENTRIC 3MT LIVE CENTER

MACHINIST TOOLS – CONCENTRIC 3MT LIVE CENTER

  • Camarillo, California, United States
  • Jan 30th
Rotor 2 Live Center #2 MT J1-1

Rotor 2 Live Center #2 MT J1-1

  • Oregon, Ohio, United States
  • Jan 30th
3 Jaw Chuck 5" With Hard Jaws

3 Jaw Chuck 5" With Hard Jaws

  • Saint Henry, Ohio, United States
  • Jan 30th
NEW JACOBS CHUCK REPAIR PARTS FOR MODEL - 11N

NEW JACOBS CHUCK REPAIR PARTS FOR MODEL - 11N

  • Fort Wayne, Indiana, United States
  • Jan 30th
Sadler Model A adjustable chuck; 5C shank

Sadler Model A adjustable chuck; 5C shank

  • Sicklerville, New Jersey, United States
  • Jan 30th
Mitee-Bite OK Vise Clamp DK2-WTI NIB

Mitee-Bite OK Vise Clamp DK2-WTI NIB

  • Unionville, Pennsylvania, United States
  • Jan 30th
COLUMBIA DEEP C CLAMP NO 546 2 1/2" x 6 1/4" AIRCRAFT WELDING TOOL

COLUMBIA DEEP C CLAMP NO 546 2 1/2" x 6 1/4" AIRCRAFT WELDING TOOL

  • Citrus Heights, California, United States
  • Jan 30th
Vintage Drop Forged Heavy Duty 6 Inch Number 44 Hargrave Cincinnati Tool C Clamp

Vintage Drop Forged Heavy Duty 6 Inch Number 44 Hargrave Cincinnati Tool C Clamp

  • Campton, Kentucky, United States
  • Jan 30th
DA180 1" Diameter Straight Shank Collet Chuck 4" Long Craftsman USA #TS180-1000

DA180 1" Diameter Straight Shank Collet Chuck 4" Long Craftsman USA #TS180-1000

  • Seminole, Florida, United States
  • Jan 30th
COLLIS V-Flange Quick Change Tension & Compression Holder Length : 5.63"

COLLIS V-Flange Quick Change Tension & Compression Holder Length : 5.63"

  • Flushing, New York, United States
  • Jan 30th
NEW 5C Collet Lathe Chuck Includes D1-6 + Chuck Wrench

NEW 5C Collet Lathe Chuck Includes D1-6 + Chuck Wrench

  • Carrollton, Ohio, United States
  • Jan 30th
Hardinge 5-C Collet 27/32" Diameter, with Internal Threads

Hardinge 5-C Collet 27/32" Diameter, with Internal Threads

  • Claremont, California, United States
  • Jan 30th
Hardinge 5-C Collet 1-1/8" Diameter, with Internal Threads

Hardinge 5-C Collet 1-1/8" Diameter, with Internal Threads

  • Claremont, California, United States
  • Jan 30th
HARDINGE 3J 23/64" COLLET WITH INTERNAL THREADS

HARDINGE 3J 23/64" COLLET WITH INTERNAL THREADS

  • Wadley, Alabama, United States
  • Jan 30th
Northwestern #44501 Hex Socket Toggle Screw USA

Northwestern #44501 Hex Socket Toggle Screw USA

  • Crystal Lake, Illinois, United States
  • Jan 30th
Northwestern #29011 Re-Nu Thread Insert 1/2-20 Int. x 3/4-10 External

Northwestern #29011 Re-Nu Thread Insert 1/2-20 Int. x 3/4-10 External

  • Crystal Lake, Illinois, United States
  • Jan 30th
Northwestern 33211 3/8-16 x 1-1/8" Spring Plunger Steel Nose USA

Northwestern 33211 3/8-16 x 1-1/8" Spring Plunger Steel Nose USA

  • Crystal Lake, Illinois, United States
  • Jan 30th
Aloris DA Quick Change Lathe Tool Post 5” X 5” W/ Tool Holder

Aloris DA Quick Change Lathe Tool Post 5” X 5” W/ Tool Holder

  • Lake Saint Louis, Missouri, United States
  • Jan 30th
Lathe Milling Attachment compond mount How-To Build PLANS

Lathe Milling Attachment compond mount How-To Build PLANS

  • Diamond Point, New York, United States
  • Jan 30th
New Adjustable Universal Stop Machine/ : Horizontal & Vertical

New Adjustable Universal Stop Machine/ : Horizontal & Vertical

  • United States
  • Jan 30th
KURT CNC DOUBLE VISE VERY NICE PRE-OWNED MADE IN AMERICA

KURT CNC DOUBLE VISE VERY NICE PRE-OWNED MADE IN AMERICA

  • Anaheim, California, United States
  • Jan 30th
6" 2 Way Machinist Milling Vise W/ Cross Slide Drill Press Holding Clamp Grip

6" 2 Way Machinist Milling Vise W/ Cross Slide Drill Press Holding Clamp Grip

  • Walnut, California, United States
  • Jan 30th
KURT VISE SPEED HANLDE

KURT VISE SPEED HANLDE

  • Los Angeles, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies