+ Post new Ad
Round CR1018 Steel Bar 1/2" Dia x 12" Long - 50 Pieces, US $770 – Picture 0
Round CR1018 Steel Bar 1/2" Dia x 12" Long - 50 Pieces, US $770 – Picture 0

Round Cr1018 Steel Bar 1/2" Dia X 12" Long - 50 Pieces

US $770

  • Lakeside-Marblehead, Ohio, United States
  • May 28th
Open on mobile:
QR code
You are bidding on 50 Pc. lot of Cold Roll Finish CR1018 Steel Pins 1/2 inch in diameter by 12 inches long. I used them pin my stone wall after drilling holes with my Hilti Drill thru three layers at a time. A section of the stone wall is shone in one of the photos. I have a total of 288 pins and will sell them in 50 pc. lots. If you are interested I would sell the lot of 288 Pcs. for a total of $120.00. Because of the weight of these steel pins is 193 pounds for the lot of 288 pcs. your pickup would be most economical. I am located in Marblehead Ohio, between Cleveland and Toledo on Lake Erie.  Shipping for 50 Pcs. per box would be by USPS Priority Mail. Again, you are bidding on 50 pcs. although only 20 pcs. are shown in the picture. Make me an offer for all that I can not resist.

Directions

Similar products from Metals & Fusions

6 pieces 4" x 4"+- aluminum plate, 0.040 metal sheet welding coupon squares

6 pieces 4" x 4"+- aluminum plate, 0.040 metal sheet welding coupon squares

  • Bethel, Vermont, United States
  • May 29th
4 pieces 0.040 (19 gage) 6" x 4"+- aluminum plate, metal sheet welding

4 pieces 0.040 (19 gage) 6" x 4"+- aluminum plate, metal sheet welding

  • Bethel, Vermont, United States
  • May 29th
E.L Post & Co Inc INGOT Motor MARINE Advertising Paperweight

E.L Post & Co Inc INGOT Motor MARINE Advertising Paperweight

  • North Scituate, Rhode Island, United States
  • May 29th
1 Pound Scientific Anode Ball .9998 Zinc Bullion Round Investment Free Shipping

1 Pound Scientific Anode Ball .9998 Zinc Bullion Round Investment Free Shipping

  • Harbeson, Delaware, United States
  • May 29th
AIM INGOT - Maniable ALUMINUM 1 Pound 5 oz (E09)

AIM INGOT - Maniable ALUMINUM 1 Pound 5 oz (E09)

  • Independence, Missouri, United States
  • May 28th
0.5" x 1" x 0.5" Aluminium U Channel 6061 T651 x 48"-Long x 2.4 mm Thick

0.5" x 1" x 0.5" Aluminium U Channel 6061 T651 x 48"-Long x 2.4 mm Thick

  • Delhi, DELHI, India
  • May 28th
0.5" x 1" x 0.5" Aluminium U Channel 6061 T651 x 60"-Long x 2.4 mm Thick

0.5" x 1" x 0.5" Aluminium U Channel 6061 T651 x 60"-Long x 2.4 mm Thick

  • Delhi, DELHI, India
  • May 28th
0.5" x 1" x 0.5" Aluminium U Channel 6061 T651 x 72"-Long x 2.4 mm Thick

0.5" x 1" x 0.5" Aluminium U Channel 6061 T651 x 72"-Long x 2.4 mm Thick

  • Delhi, DELHI, India
  • May 28th
0.5" x 1" x 0.5" Aluminium U Channel 6061 T651 x 84"-Long x 2.4 mm Thick

0.5" x 1" x 0.5" Aluminium U Channel 6061 T651 x 84"-Long x 2.4 mm Thick

  • Delhi, DELHI, India
  • May 28th
Kovar Fine Wire 1.00mm/0.04" Dimater ASTM F15 GOST 10994 29HK-BN

Kovar Fine Wire 1.00mm/0.04" Dimater ASTM F15 GOST 10994 29HK-BN

  • ISTANBUL, TURKEY, Turkey
  • May 28th
Solid Brass Bar Stock Cylinder Scrap Metal Material 6 LBS Rod Lathe

Solid Brass Bar Stock Cylinder Scrap Metal Material 6 LBS Rod Lathe

  • Aberdeen, Washington, United States
  • May 28th
1 1/4 X 3 X 6" ALUMINUM 6061 FLAT BAR T6" 1.250" Thick Plate New Mill Stock

1 1/4 X 3 X 6" ALUMINUM 6061 FLAT BAR T6" 1.250" Thick Plate New Mill Stock

  • Long Beach, California, United States
  • May 28th
D 8" ALUMINUM 6061 ROUND ROD 1.8" LONG T6511 8.0" Diameter Solid Lathe Bar Stock

D 8" ALUMINUM 6061 ROUND ROD 1.8" LONG T6511 8.0" Diameter Solid Lathe Bar Stock

  • Colorado Springs, Colorado, United States
  • May 28th
D 8" ALUMINUM 6061 ROUND ROD 1.45" LONG T6511 8.0" OD Solid Lathe Bar Stock

D 8" ALUMINUM 6061 ROUND ROD 1.45" LONG T6511 8.0" OD Solid Lathe Bar Stock

  • Colorado Springs, Colorado, United States
  • May 28th
D 8" ALUMINUM 6061 ROUND ROD 2.31" LONG T6511 8.0" OD Solid Lathe Bar Stock

D 8" ALUMINUM 6061 ROUND ROD 2.31" LONG T6511 8.0" OD Solid Lathe Bar Stock

  • Colorado Springs, Colorado, United States
  • May 28th
.030" Indium corporation wire Indalloy #1 50% indium & 50% tin solder 37 grams

.030" Indium corporation wire Indalloy #1 50% indium & 50% tin solder 37 grams

  • Portland, Oregon, United States
  • May 28th
4-1/4" ALUMINUM 6061 ROUND ROD 5-3/8" LONG SOLID T6511 Lathe Bar Stock 4.25" OD

4-1/4" ALUMINUM 6061 ROUND ROD 5-3/8" LONG SOLID T6511 Lathe Bar Stock 4.25" OD

  • Colorado Springs, Colorado, United States
  • May 28th
D 7" ALUMINUM 6061 ROUND ROD 2.36" LONG T6511 7.00" OD Solid Lathe Bar Stock

D 7" ALUMINUM 6061 ROUND ROD 2.36" LONG T6511 7.00" OD Solid Lathe Bar Stock

  • Colorado Springs, Colorado, United States
  • May 28th
6-1/4" ALUMINUM 6061 ROUND ROD 4-3/8" LONG T6511 6.25" OD Solid Lathe Bar Stock

6-1/4" ALUMINUM 6061 ROUND ROD 4-3/8" LONG T6511 6.25" OD Solid Lathe Bar Stock

  • Colorado Springs, Colorado, United States
  • May 28th
6-1/4" ALUMINUM 6061 ROUND ROD 4" LONG T6511 6.25" OD Solid Lathe Bar Stock

6-1/4" ALUMINUM 6061 ROUND ROD 4" LONG T6511 6.25" OD Solid Lathe Bar Stock

  • Colorado Springs, Colorado, United States
  • May 28th

People who viewed this item also vieved

New PARLEC RER40-1023 Collet 26mm 26"

New PARLEC RER40-1023 Collet 26mm 26"

  • Dayton, Ohio, United States
  • Feb 23rd
Belt Grinder Contact Wheels USA

Belt Grinder Contact Wheels USA

  • Eustis, Florida, United States
  • Feb 23rd
New PARLEC 100RPG-1000 Collet 1" TH04394 100 17-12-2004

New PARLEC 100RPG-1000 Collet 1" TH04394 100 17-12-2004

  • Dayton, Ohio, United States
  • Feb 23rd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies