+ Post new Ad
ROYAL N/C Quad-Bearing Live Center - Point Length : 1-1/2" Morse Taper: 4 MT, US $652.99 – Picture 0
ROYAL N/C Quad-Bearing Live Center - Point Length : 1-1/2" Morse Taper: 4 MT, US $652.99 – Picture 0

Royal N/c Quad-bearing Live Center - Point Length : 1-1/2" Morse Taper: 4 Mt

US $652.99

  • Flushing, New York, United States
  • Jan 30th
Open on mobile:
QR code
ROYAL N/C Quad-Bearing Live Center - Point Length : 1-1/2" Morse Taper: 4 MT 4MT CNC POINT QUAD- BEARING LIVE CENTR-ROYAL For Grinders, Manual Lathes And CNC Lathes Features Accuracy: ±0.00005" Three matched angular contact bearings with factory-set preload support the primary load area of the point. Special spindle-like point extends into the shank where it is supported by a needle bearing. This design substantially increases rigidity, reduces point deflection and dampens vibration. Bearings protected by a combination steel shield and neoprene seal. Point is high-carbon alloy steel heat treated to Rc 61 - 63. Included point angle is 60°+15'/-0. Bearings permanently lubricated. Reduced knockout diameter prevents taper from mushrooming. Low profile head for tool clearance. Bearing life significantly extended with the exclusive Royal Roto-Shield™. PRODUCT SPECIFICATIONS Unit of Measure each Must Buy 1 Country of Origin UNITED STATES OF AMERICA Shipping Restrictions None Brand ROYAL Description ROYAL N/C Quad-Bearing Live Center - Point Length : 1-1/2" Morse Taper: 4 MT Model # 10664 Point Length 1-1/2" Morse Taper 4 MT Point Type CNC Point Maximum Rotational Speed 3,000 RPM Head Diameter 2-1/2" Weight Of Workpiece 1,230 lbs. Accuracy Inch ±0.0001" Comp Load Rate 3,380 lbs. Head Length 2-11/16" Large Point Diameter 1-1/4" Length From End of Morse Taper To Head 4-7/16" Overall Length 9-5/8" Point Angle 60°+15'/-0. Small Point Diameter 1/2" Thrust Load 2,150 lbs. Weight 4.9 lbs.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer Part Number 10664
Part Brand ROYAL

Directions

Similar products from Live Centers

#5 MORSE TAPER LIVE CENTER 60° EXT. TIP MEDIUM DUTY .0002" B231

#5 MORSE TAPER LIVE CENTER 60° EXT. TIP MEDIUM DUTY .0002" B231

  • Montville, Ohio, United States
  • Jan 30th
Royal Live Center (Inv.28922)

Royal Live Center (Inv.28922)

  • Portland, Connecticut, United States
  • Jan 30th
BROWN & SHARPE #8 DEAD CENTER (LOC879)

BROWN & SHARPE #8 DEAD CENTER (LOC879)

  • Laingsburg, Michigan, United States
  • Jan 30th
BROWN & SHARPE #7 DEAD CENTER (LOC878B)

BROWN & SHARPE #7 DEAD CENTER (LOC878B)

  • Laingsburg, Michigan, United States
  • Jan 30th
USED #6MT LATHE DEAD CENTER (2.378" Point Diameter) PZKa-6

USED #6MT LATHE DEAD CENTER (2.378" Point Diameter) PZKa-6

  • Fairfield, Iowa, United States
  • Jan 30th
Spur Center w #3 MT Shank / XJ 119

Spur Center w #3 MT Shank / XJ 119

  • Seffner, Florida, United States
  • Jan 30th
NEW MT4 MORSE TAPER LIVE CENTER CARBIDE BEARING CNC

NEW MT4 MORSE TAPER LIVE CENTER CARBIDE BEARING CNC

  • Garden Grove, California, United States
  • Jan 30th
USED RITEN #14 JARNO LIVE CENTER WITH LONG POINT (POINT DIAMETER 1.380")

USED RITEN #14 JARNO LIVE CENTER WITH LONG POINT (POINT DIAMETER 1.380")

  • Fairfield, Iowa, United States
  • Jan 30th
#3 Morse Taper 1" Live Center

#3 Morse Taper 1" Live Center

  • Chicago, Illinois, United States
  • Jan 30th
ROYAL CNC Alloy Steel Threaded Dead Center - TAPER: 5 MT

ROYAL CNC Alloy Steel Threaded Dead Center - TAPER: 5 MT

  • Flushing, New York, United States
  • Jan 30th
BISON Ultra Precision Adjustable Heavy Duty Live Center Point Length : 2.01"

BISON Ultra Precision Adjustable Heavy Duty Live Center Point Length : 2.01"

  • Flushing, New York, United States
  • Jan 30th
TTC Revolving Tailstock Turret Tapping Collet for 5" Turret

TTC Revolving Tailstock Turret Tapping Collet for 5" Turret

  • Flushing, New York, United States
  • Jan 30th
BISON Ultra Precision Adjustable Heavy Duty Live Center Point Length : 2.44"

BISON Ultra Precision Adjustable Heavy Duty Live Center Point Length : 2.44"

  • Flushing, New York, United States
  • Jan 30th
TTC Revolving Tailstock Turret Die Holder for 5" Turret

TTC Revolving Tailstock Turret Die Holder for 5" Turret

  • Flushing, New York, United States
  • Jan 30th
BISON Super Precision Live Center Point Length : Overall Length : 7.24"

BISON Super Precision Live Center Point Length : Overall Length : 7.24"

  • Flushing, New York, United States
  • Jan 30th
ROYAL ROYAL Dead Center Half Carbide-Tipped POINT DIAMETER: 0.938"

ROYAL ROYAL Dead Center Half Carbide-Tipped POINT DIAMETER: 0.938"

  • Flushing, New York, United States
  • Jan 30th
ROYAL Quad-Bearing Live Center Point Length : 1-1/16" Overall Length : 6-7/16"

ROYAL Quad-Bearing Live Center Point Length : 1-1/16" Overall Length : 6-7/16"

  • Flushing, New York, United States
  • Jan 30th
TTC Bull Nose Live Center - Overall Length : 6.50" Taper: 3 MT

TTC Bull Nose Live Center - Overall Length : 6.50" Taper: 3 MT

  • Flushing, New York, United States
  • Jan 30th
ROYAL Value-Turn Live Center Point Length : 7/8" Overall Length : 5-7/8"

ROYAL Value-Turn Live Center Point Length : 7/8" Overall Length : 5-7/8"

  • Flushing, New York, United States
  • Jan 30th
TTC Revolving Tailstock Turret Live Center for 5" Turret

TTC Revolving Tailstock Turret Live Center for 5" Turret

  • Flushing, New York, United States
  • Jan 30th

People who viewed this item also vieved

PRATT & WHITNEY P&W 1" COLLET FOR JIG BORE MACHINE MORE LISTED LOT C11781

PRATT & WHITNEY P&W 1" COLLET FOR JIG BORE MACHINE MORE LISTED LOT C11781

  • Dayton, Ohio, United States
  • Mar 10th
PRATT & WHITNEY P&W 1/2" COLLET FOR JIG BORE MACHINE MORE LISTED LOT C11784

PRATT & WHITNEY P&W 1/2" COLLET FOR JIG BORE MACHINE MORE LISTED LOT C11784

  • Dayton, Ohio, United States
  • Mar 10th
PRATT & WHITNEY P&W 3/4" COLLET FOR JIG BORE MACHINE MORE LISTED LOT C11756

PRATT & WHITNEY P&W 3/4" COLLET FOR JIG BORE MACHINE MORE LISTED LOT C11756

  • Dayton, Ohio, United States
  • Mar 10th
Northwestern #19008 Jig Leveling Leg 3/4 x 6" USA

Northwestern #19008 Jig Leveling Leg 3/4 x 6" USA

  • Crystal Lake, Illinois, United States
  • Mar 26th
Northwestern #19004 Jig Leveling Leg 3/4 x 2-1/2" USA

Northwestern #19004 Jig Leveling Leg 3/4 x 2-1/2" USA

  • Crystal Lake, Illinois, United States
  • Mar 26th
Northwestern #21215 Tooling Eye Bolt 3/4-10 x 4-1/2" USA

Northwestern #21215 Tooling Eye Bolt 3/4-10 x 4-1/2" USA

  • Crystal Lake, Illinois, United States
  • Mar 26th
MACHINIST'S TOOLMAKER'S WELDER'S PAIR OF CINCINNATI #556 DEEP THROAT C CLAMP S

MACHINIST'S TOOLMAKER'S WELDER'S PAIR OF CINCINNATI #556 DEEP THROAT C CLAMP S

  • Golden Valley, Arizona, United States
  • Mar 28th
Vise Grip 24R Locking Clamp C Clamp Welding Clamp Dated 2008 Irwin

Vise Grip 24R Locking Clamp C Clamp Welding Clamp Dated 2008 Irwin

  • Purlear, North Carolina, United States
  • Mar 28th
Vise Grip 24R Locking Clamp C Clamp Welding Clamp *Rare Find - USA Made!

Vise Grip 24R Locking Clamp C Clamp Welding Clamp *Rare Find - USA Made!

  • Purlear, North Carolina, United States
  • Mar 28th
KLOPFER M/MB 160 WEDGE BLOK LATHE CHUCK

KLOPFER M/MB 160 WEDGE BLOK LATHE CHUCK

  • Galvin, Washington, United States
  • Apr 24th
Lathe Chuck Adapter 2 1/4 " Thick See pictures

Lathe Chuck Adapter 2 1/4 " Thick See pictures

  • Georgetown, Delaware, United States
  • Apr 24th
3" chuck backplate with 3MT shaft

3" chuck backplate with 3MT shaft

  • North Branford, Connecticut, United States
  • Apr 25th
Ridgid BC-810 Top Screw Bench Chain Vise

Ridgid BC-810 Top Screw Bench Chain Vise

  • Holland, Michigan, United States
  • Apr 25th
MACHINIST TOOLS SMALL 2" DRILL VISE

MACHINIST TOOLS SMALL 2" DRILL VISE

  • Cicero, New York, United States
  • Apr 25th
Bessey 6" Heavy Duty Workshop Vise - Model # BV-HD60

Bessey 6" Heavy Duty Workshop Vise - Model # BV-HD60

  • Indianapolis, Indiana, United States
  • Apr 26th
#SIR-32F/38 IEMCA MILTI-SPINDLE AUTOMATIC MAGAZINE BAR LOADER #27812

#SIR-32F/38 IEMCA MILTI-SPINDLE AUTOMATIC MAGAZINE BAR LOADER #27812

  • Cincinnati, Ohio, United States
  • May 29th
LNS Hydrobar Sprint S2 Magazine Barfeeder With 3 1/8” Capacity x 12’

LNS Hydrobar Sprint S2 Magazine Barfeeder With 3 1/8” Capacity x 12’

  • Lake Saint Louis, Missouri, United States
  • May 29th
JET JTX-2748, 48" x 27" 8,000 lb. Capacity Pallet Truck 140800 New

JET JTX-2748, 48" x 27" 8,000 lb. Capacity Pallet Truck 140800 New

  • Lawrenceville, Georgia, United States
  • May 29th
6 INCH ROTARY TABLE WITH 5 INCH CHUCK

6 INCH ROTARY TABLE WITH 5 INCH CHUCK

  • Encinitas, California, United States
  • Jun 2nd
Tsudakoma RNCM-501R 19” Face Plate CNC Indexer W/ Fanuc Motors.

Tsudakoma RNCM-501R 19” Face Plate CNC Indexer W/ Fanuc Motors.

  • Lake Saint Louis, Missouri, United States
  • Jun 3rd
MILLTRONICS PARTNER 1F CNC MILL

MILLTRONICS PARTNER 1F CNC MILL

  • Cincinnati, Ohio, United States
  • Jun 3rd
USA Made STARRETT No.567 Toolmakers v-block - Free USA Ship

USA Made STARRETT No.567 Toolmakers v-block - Free USA Ship

  • Waterford, Michigan, United States
  • Jun 3rd
Starrett Parallels S384-3Z EDP 63678 - USED - Made in USA.

Starrett Parallels S384-3Z EDP 63678 - USED - Made in USA.

  • Sterling Heights, Michigan, United States
  • Jun 3rd
Two Fowler V-Blocks with clamps in Original Box 40x36x45mm

Two Fowler V-Blocks with clamps in Original Box 40x36x45mm

  • Saint Louis, Missouri, United States
  • Jun 3rd
ROYAL 43306 Compact CNC Bar Puller

ROYAL 43306 Compact CNC Bar Puller

  • Duncan, South Carolina, United States
  • Jun 8th
ROYAL 43300 Compact CNC Bar Puller

ROYAL 43300 Compact CNC Bar Puller

  • Duncan, South Carolina, United States
  • Jun 8th
TG100 3.5' CAT50 COLLET CHUCK

TG100 3.5' CAT50 COLLET CHUCK

  • Duncan, South Carolina, United States
  • Jun 8th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies