+ Post new Ad
ROYAL Quad-Bearing Live Center Point Length : 1-1/16'' Overall Length : 6-7/16'', US $206 – Picture 0
ROYAL Quad-Bearing Live Center Point Length : 1-1/16'' Overall Length : 6-7/16'', US $206 – Picture 0

Royal Quad-bearing Live Center Point Length : 1-1/16'' Overall Length : 6-7/16''

US $206

  • Duncan, South Carolina, United States
  • May 24th
Open on mobile:
QR code
Features Accuracy: ±0.00005" Three matched angular contact bearings with factory-set preload support the primary load area of the point. Special spindle-like point extends into the shank where it is supported by a needle bearing. This design substantially increases rigidity reduces point deflection and dampens vibration. Bearings protected by a combination steel shield and neoprene seal. Point is high-carbon alloy steel heat treated to Rc 61 - 63. Included point angle is 60°+15'/-0. Bearings permanently lubricated. Reduced knockout diameter prevents taper from mushrooming. Low profile head for tool clearance. Bearing life significantly extended with the exclusive Royal Roto-Shield™. Product Specifications Product Specifications Weight 2.00000 Brand ROYAL Model # 10413 Taper 3 MT Thrust Load 1270 lbs. Weight Of Workpiece 885 lbs. Center Point Angle — Maximum Rotational Speed 3500 RPM Center Diameter — Spindle Diameter — Point Diameter 7/8" Point Type Standard Body Diameter — Largest Head Diameter — Head Diameter 1-3/4" Body Length — Comp Load Rate 2155 lbs. Net Weight of Center — Length From Head To Tip of Point — Overall Length 6-7/16" Length From Gage Line To Tip — Accuracy ±0.0001" Head Length 1-5/16" Length From End of Morse Taper To Head 3-7/16" Morse Taper 3 Point Angle 60°+15'/-0. Point Length 1-1/16" TIR Repeatability ±0.00005" Country of Origin UNITED STATES OF AMERICA Powered by Solid Commerce The All-in-One Listing, Inventory & Order Management Solution for Online Merchants

Directions

Similar products from Live Centers

NOS NEW Enco MFG CO Live Center with #1MT and Original Box ATLAS 6'' LATHE 824K

NOS NEW Enco MFG CO Live Center with #1MT and Original Box ATLAS 6'' LATHE 824K

  • Dearborn, Michigan, United States
  • May 24th
9.84" 250mm Bison Universal Pipe Live Center 8883-125-250 (GGG)

9.84" 250mm Bison Universal Pipe Live Center 8883-125-250 (GGG)

  • Dallas, Texas, United States
  • May 24th
Ritten - Bloomingburg O. Live Center (8D)

Ritten - Bloomingburg O. Live Center (8D)

  • Waverly, Ohio, United States
  • May 24th
ROYAL Versa-Turn Live Center - Overall Length : 7-15/16' Taper: 4 MT

ROYAL Versa-Turn Live Center - Overall Length : 7-15/16' Taper: 4 MT

  • Duncan, South Carolina, United States
  • May 24th
BISON Super Precision Live Center Point Length : Overall Length : 4.07''

BISON Super Precision Live Center Point Length : Overall Length : 4.07''

  • Duncan, South Carolina, United States
  • May 24th
SKODA Precision Heavy Duty Live Center - TAPER: 1 MT

SKODA Precision Heavy Duty Live Center - TAPER: 1 MT

  • Duncan, South Carolina, United States
  • May 24th
ROYAL Versa-Turn Live Center - Overall Length : 9-13/16'' Taper: 5 MT

ROYAL Versa-Turn Live Center - Overall Length : 9-13/16'' Taper: 5 MT

  • Duncan, South Carolina, United States
  • May 24th
ROYAL ROYAL Dead Center Carbide-Tipped Point POINT DIAMETER: 0.700''

ROYAL ROYAL Dead Center Carbide-Tipped Point POINT DIAMETER: 0.700''

  • Duncan, South Carolina, United States
  • May 24th
BISON Ultra Precision Adjustable Heavy Duty Live Center Point Length : 2.44''

BISON Ultra Precision Adjustable Heavy Duty Live Center Point Length : 2.44''

  • Duncan, South Carolina, United States
  • May 24th
ROYAL Value-Turn Live Center Point Length : 7/8'' Overall Length : 5-7/8''

ROYAL Value-Turn Live Center Point Length : 7/8'' Overall Length : 5-7/8''

  • Duncan, South Carolina, United States
  • May 24th
ROYAL Value-Turn Live Center Point Length : 7/8'' Overall Length : 5-1/4''

ROYAL Value-Turn Live Center Point Length : 7/8'' Overall Length : 5-1/4''

  • Duncan, South Carolina, United States
  • May 24th
ROYAL ROYAL Dead Center Half Carbide-Tipped POINT DIAMETER: 0.938''

ROYAL ROYAL Dead Center Half Carbide-Tipped POINT DIAMETER: 0.938''

  • Duncan, South Carolina, United States
  • May 24th
ROYAL Oversized Carbide Point Dead Center - TAPER: 4 MT

ROYAL Oversized Carbide Point Dead Center - TAPER: 4 MT

  • Duncan, South Carolina, United States
  • May 24th
ROYAL ROYAL Dead Center Half Carbide-Tipped POINT DIAMETER: 1.231''

ROYAL ROYAL Dead Center Half Carbide-Tipped POINT DIAMETER: 1.231''

  • Duncan, South Carolina, United States
  • May 24th
ROYAL CNC Spindle Type Live Center - Point Length : 1-7/8'' Morse Taper: 3 MT

ROYAL CNC Spindle Type Live Center - Point Length : 1-7/8'' Morse Taper: 3 MT

  • Duncan, South Carolina, United States
  • May 24th
CONCENTRIC Spring Loaded Live Center - TAPER: 5 MT

CONCENTRIC Spring Loaded Live Center - TAPER: 5 MT

  • Duncan, South Carolina, United States
  • May 24th
ROHM Revolving Tailstock Center - Morse Taper: 4 HEAD DIAMETER: 2.756''

ROHM Revolving Tailstock Center - Morse Taper: 4 HEAD DIAMETER: 2.756''

  • Duncan, South Carolina, United States
  • May 24th
Rohm Revolving Tailstock Center Morse Taper 5 Head Diam 3.543'' Taper 5 MT 42843

Rohm Revolving Tailstock Center Morse Taper 5 Head Diam 3.543'' Taper 5 MT 42843

  • Duncan, South Carolina, United States
  • May 24th
SKODA Precision Heavy Duty Live Center Set - Morse Taper: 3 MT

SKODA Precision Heavy Duty Live Center Set - Morse Taper: 3 MT

  • Duncan, South Carolina, United States
  • May 24th
ROYAL 11011 11011 FULL & 1/2 DEADCENTER

ROYAL 11011 11011 FULL & 1/2 DEADCENTER

  • Duncan, South Carolina, United States
  • May 24th

People who viewed this item also vieved

3 Pc. Set of Soft Jaws for EMCO Compact 5 Lathe 3-Jaw Self Centering 80mm Chuck

3 Pc. Set of Soft Jaws for EMCO Compact 5 Lathe 3-Jaw Self Centering 80mm Chuck

  • Versailles, Ohio, United States
  • Jan 30th
Yuasa 6''by12'' magnetic chuck 600-012 fits surface grinder

Yuasa 6''by12'' magnetic chuck 600-012 fits surface grinder

  • Millstadt, Illinois, United States
  • Jan 30th
Lathe Chuck; 6" adjustable; L1-0D mount (CTAM# 6842)

Lathe Chuck; 6" adjustable; L1-0D mount (CTAM# 6842)

  • Sicklerville, New Jersey, United States
  • Jan 30th
Merrill Bros No 44 4 Ton 8000LB Plate Lifting Clamp 0-1-1/2" Grip Capacity

Merrill Bros No 44 4 Ton 8000LB Plate Lifting Clamp 0-1-1/2" Grip Capacity

  • Middlebury, Indiana, United States
  • Jan 30th
Merrill Bros 3 Ton 6000lb Plate Lifting Clamp 0-2"Grip Capacity 3'5"Reach

Merrill Bros 3 Ton 6000lb Plate Lifting Clamp 0-2"Grip Capacity 3'5"Reach

  • Middlebury, Indiana, United States
  • Jan 30th
Merrill Bros No 21G 1 Ton 2000Lb WLL Plate Lifting Clamp 0-3/4"Grip Capacity

Merrill Bros No 21G 1 Ton 2000Lb WLL Plate Lifting Clamp 0-3/4"Grip Capacity

  • Middlebury, Indiana, United States
  • Jan 30th
Modern Magic 2 Collet With Bit.

Modern Magic 2 Collet With Bit.

  • Newark, Delaware, United States
  • Jan 30th
COLLETS FULL SET WITH MANDREL

COLLETS FULL SET WITH MANDREL

  • Santa Ana, California, United States
  • Jan 30th
27pcs Acura-Flex Collet Set AF-241 to AF-275 - 3/8 to 1-5/32

27pcs Acura-Flex Collet Set AF-241 to AF-275 - 3/8 to 1-5/32

  • Compton, California, United States
  • Jan 30th
MACHINIST LATHE MILL Heavy 9" in Diameter 1 1/2" Hardened Steel Fixture Plate

MACHINIST LATHE MILL Heavy 9" in Diameter 1 1/2" Hardened Steel Fixture Plate

  • Morris Plains, New Jersey, United States
  • Jan 30th
BROWN & SHARPE COMPOUND SINE PLATE 12" x 6" W/ RAIL

BROWN & SHARPE COMPOUND SINE PLATE 12" x 6" W/ RAIL

  • Brandon, Florida, United States
  • Jan 30th
Craftsman 8” Wood Turning Face Plate 9 29841 New

Craftsman 8” Wood Turning Face Plate 9 29841 New

  • Minneapolis, Minnesota, United States
  • Jan 30th
20 - 3/16" Wedgelock Cleco Fasteners with 4 Monogram Side Grip Clecos and Pliers

20 - 3/16" Wedgelock Cleco Fasteners with 4 Monogram Side Grip Clecos and Pliers

  • Mineral Wells, Texas, United States
  • Jan 30th
Wilton 344 Pow-R-Arm Work Positioner

Wilton 344 Pow-R-Arm Work Positioner

  • Carol Stream, Illinois, United States
  • Jan 30th
Original Craftsman Atlas 6" Lathe 101 618 Gear Guard Cover w/ Threading Chart an

Original Craftsman Atlas 6" Lathe 101 618 Gear Guard Cover w/ Threading Chart an

  • Waterbury, Connecticut, United States
  • Jan 30th
KURT .688" HEX 1/4"-20 SCREW MINILOCK MODULAR VISES, MT4 *NIB*

KURT .688" HEX 1/4"-20 SCREW MINILOCK MODULAR VISES, MT4 *NIB*

  • Sunman, Indiana, United States
  • Jan 30th
Accupro Toolmakers Vise - 4.7" Jaw Opening, 3.15" Height, 8.27" OAL NEW

Accupro Toolmakers Vise - 4.7" Jaw Opening, 3.15" Height, 8.27" OAL NEW

  • Saint Louis, Missouri, United States
  • Jan 30th
SHORT VISE HANDLE FOR KURT OR SIMILAR WITH 3/4 HEX DRIVE LIGHTWEIGHT ALUMINUM

SHORT VISE HANDLE FOR KURT OR SIMILAR WITH 3/4 HEX DRIVE LIGHTWEIGHT ALUMINUM

  • New Port Richey, Florida, United States
  • Jan 30th
MACHINIST TOOLS LATHE MILL Lot of Micro Parallel Blocks Hold Downs for Sherline

MACHINIST TOOLS LATHE MILL Lot of Micro Parallel Blocks Hold Downs for Sherline

  • Morris Plains, New Jersey, United States
  • Mar 3rd
Parallel set with box C-2

Parallel set with box C-2

  • Reynoldsburg, Ohio, United States
  • Mar 3rd
Finn Spi parrallel set machinist mill set up C-1

Finn Spi parrallel set machinist mill set up C-1

  • Reynoldsburg, Ohio, United States
  • Mar 3rd
HAAS 4th AXIS 5C 7 PIN ROTARY INDEXER AND CONTROLLER WITH MANUAL CLOSER S5C

HAAS 4th AXIS 5C 7 PIN ROTARY INDEXER AND CONTROLLER WITH MANUAL CLOSER S5C

  • Santa Clarita, California, United States
  • Mar 5th
Palmgren 10" Rotary Table; Horizontal & Vertical Mount (CTAM# 7199)

Palmgren 10" Rotary Table; Horizontal & Vertical Mount (CTAM# 7199)

  • Sicklerville, New Jersey, United States
  • Mar 5th
8" 3-Jaw Chuck Indexing Head - Super Spacer 24 Divisions - Made in West Germany

8" 3-Jaw Chuck Indexing Head - Super Spacer 24 Divisions - Made in West Germany

  • Flint, Michigan, United States
  • Mar 5th
R8 Bridgeport ER32 Chuck+18 PCs ER32 Collets+Spanner H

R8 Bridgeport ER32 Chuck+18 PCs ER32 Collets+Spanner H

  • Vancouver, Washington, United States
  • Mar 9th
Collets

Collets

  • Plymouth, Indiana, United States
  • Mar 9th
Hardinge 5/C 2 Reg Step Chuck ( Brand New In Box)

Hardinge 5/C 2 Reg Step Chuck ( Brand New In Box)

  • Rochester, New York, United States
  • Mar 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies