+ Post new Ad
ROYAL Spring Type Live Center - Overall Length : 5-15/16" Taper: 4 MT, US $497.99 – Picture 0
ROYAL Spring Type Live Center - Overall Length : 5-15/16" Taper: 4 MT, US $497.99 – Picture 0

Royal Spring Type Live Center - Overall Length : 5-15/16" Taper: 4 Mt

US $497.99

  • Flushing, New York, United States
  • Jan 30th
Open on mobile:
QR code
ROYAL Spring Type Live Center - Overall Length : 5-15/16" Taper: 4 MT 4MT EXT.CNC POINT SPRING TYPE LIVE CENTER-ROYAL Dual Roller Bearings Features ±0.00005" TIR guaranteed. Ultra low-profile body provides outstanding tool clearance. Unique spring-loaded design compensates for thermal expansion of the workpiece by allowing the point to slide axially as the part grows. A series of heavy disk springs keep the point firmly seated in the center-hole of the workpiece. Dual roller bearings provide solid radial load capacities. Axial loads are handled by a special thrust bearing located between the point and springs. Body and point are hardened for wear resistance and long life. Bearings are protected from coolant and chips by a neoprene seal. Extended point provides tool clearance for CNC applications. PRODUCT SPECIFICATIONS Unit of Measure each Must Buy 1 Country of Origin UNITED STATES OF AMERICA Shipping Restrictions None Brand ROYAL Description ROYAL Spring Type Live Center - Overall Length : 5-15/16" Taper: 4 MT Model # 10534 Taper 4 MT Thrust Load 435 lbs. Weight Of Workpiece 580 lbs. Maximum Rotational Speed 4,500 RPM Comp Load Rate 1,015 lbs. Gage Line Length 4-1/16" Length From Gage Line To Front of Center 1.231" Length of Taper To Back of Head 4-9/16" Morse Taper 4 Overall Length 5-15/16" Point Angle 60° Point Diameter 5/8" Point Length 1-3/8" Point Type Extended CNC Small Point Diameter 3/8" Spring Travel 0.18" TIR Repeatability ±0.00005" Weight 1.3 lbs.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer Part Number 10534
Part Brand ROYAL

Directions

Similar products from Live Centers

USED RITEN #6MT MORSE TAPER LIVE LATHE CENTER RP34106-A1859 (1.750" Point Dia)

USED RITEN #6MT MORSE TAPER LIVE LATHE CENTER RP34106-A1859 (1.750" Point Dia)

  • Fairfield, Iowa, United States
  • Jan 30th
RITEN, 12103, 3MT Regal Live Center, Standard Point, 7/8" Point Dia., USA, /DB0/

RITEN, 12103, 3MT Regal Live Center, Standard Point, 7/8" Point Dia., USA, /DB0/

  • Saint Louis, Missouri, United States
  • Jan 30th
POWER HOLD SFJ D-3a HIGH ACCURACY PRECISION #2MT LIVE CENTER Swiss Made

POWER HOLD SFJ D-3a HIGH ACCURACY PRECISION #2MT LIVE CENTER Swiss Made

  • Rolla, Missouri, United States
  • Jan 30th
ROYAL ROYAL Dead Center Carbide-Tipped Point POINT DIAMETER: 1.231"

ROYAL ROYAL Dead Center Carbide-Tipped Point POINT DIAMETER: 1.231"

  • Flushing, New York, United States
  • Jan 30th
ROYAL 10005-A 5-1592 5MT Double Bearing Interchangeable Point Live Center USA 3K

ROYAL 10005-A 5-1592 5MT Double Bearing Interchangeable Point Live Center USA 3K

  • Saint Louis, Missouri, United States
  • Jan 30th
Morse Taper #4 Live Center (Inv.29989)

Morse Taper #4 Live Center (Inv.29989)

  • Portland, Connecticut, United States
  • Jan 30th
Bison Live Center MT#3 Centers Lathe Interchangeable

Bison Live Center MT#3 Centers Lathe Interchangeable

  • Columbus, Ohio, United States
  • Jan 30th
MT 4 (Morse Taper 4) Bull Nose Live Center-New

MT 4 (Morse Taper 4) Bull Nose Live Center-New

  • Chino, California, United States
  • Jan 30th
#4 MORSE TAPER LIVE CENTER NICE 143K

#4 MORSE TAPER LIVE CENTER NICE 143K

  • Bedford, Ohio, United States
  • Jan 30th
TAILSTOCK FOOTSTOCK 4" CENTER HEAVY DUTY ***XLNT***

TAILSTOCK FOOTSTOCK 4" CENTER HEAVY DUTY ***XLNT***

  • Highland, New York, United States
  • Jan 30th
10" Lathe Headstock Dead Center Faceplate w/Dog Slot + D1-8 Camlock Mount

10" Lathe Headstock Dead Center Faceplate w/Dog Slot + D1-8 Camlock Mount

  • Middlebury, Indiana, United States
  • Jan 30th
Craftsman 109 lathe live center

Craftsman 109 lathe live center

  • Spring Hill, Kansas, United States
  • Jan 30th
Riten 17303 1SS Concentric Live Center, 1.0" Shank Dia., 0.558" Point Dia. (6.2)

Riten 17303 1SS Concentric Live Center, 1.0" Shank Dia., 0.558" Point Dia. (6.2)

  • Saint Louis, Missouri, United States
  • Jan 30th
SOUTH BEND SFP-100NK 5-1/8" FACEPLATE 1-1/2"-8 THREAD 9" & 10K LATHE DOG PLATE

SOUTH BEND SFP-100NK 5-1/8" FACEPLATE 1-1/2"-8 THREAD 9" & 10K LATHE DOG PLATE

  • Washington, Illinois, United States
  • Jan 30th
Bison NC Quad Bearing Live Center # 4 MT Heavy Duty

Bison NC Quad Bearing Live Center # 4 MT Heavy Duty

  • Columbus, Ohio, United States
  • Jan 30th
MT5 High Speed Live Center A-Type

MT5 High Speed Live Center A-Type

  • Chino, California, United States
  • Jan 30th
14" x 20" Bench Centers with Indicator Stand

14" x 20" Bench Centers with Indicator Stand

  • Euclid, Ohio, United States
  • Jan 30th
Morse Taper MT 2 Tailstock Turret Turrets Indexing MT2

Morse Taper MT 2 Tailstock Turret Turrets Indexing MT2

  • San Gabriel, California, United States
  • Jan 30th
Royal Products 5MT Heavy Duty Quad Bearing Live Center, USA, #10445

Royal Products 5MT Heavy Duty Quad Bearing Live Center, USA, #10445

  • Saint Louis, Missouri, United States
  • Jan 30th
Royal products 3 MT Morse taper expanded range carbide tipped dead center 11501

Royal products 3 MT Morse taper expanded range carbide tipped dead center 11501

  • Warren, Michigan, United States
  • Jan 30th

People who viewed this item also vieved

Vintage Collet Rack w/ 3-AT Collets, Nose Piece, Spindle Cap from Atlas Lathe

Vintage Collet Rack w/ 3-AT Collets, Nose Piece, Spindle Cap from Atlas Lathe

  • Rocky Point, New York, United States
  • Jun 11th
Assorted Pratt Whitney 3-NS Collets from Cutter Sharpener

Assorted Pratt Whitney 3-NS Collets from Cutter Sharpener

  • Rocky Point, New York, United States
  • Jun 11th
ER11 COLLET SET WITH HOLDER 3/4" STRAIGHT SHANK (1/16"-1/4") 8PC SET GS/SOWA

ER11 COLLET SET WITH HOLDER 3/4" STRAIGHT SHANK (1/16"-1/4") 8PC SET GS/SOWA

  • Meridian, Idaho, United States
  • Jun 12th
Machinist Metalworking Adjustable Tilt Table

Machinist Metalworking Adjustable Tilt Table

  • Suffern, New York, United States
  • Jun 24th
Cast Iron Angle Plate

Cast Iron Angle Plate

  • Dayton, Ohio, United States
  • Jun 25th
MACHINIST SUPER SPACER INDEX JIG FIXTURE CENTER TAILSTOCK MILL GRINDING LOT E

MACHINIST SUPER SPACER INDEX JIG FIXTURE CENTER TAILSTOCK MILL GRINDING LOT E

  • Waterford, Michigan, United States
  • Jun 26th
MERRILL BROTHERS 1 TON CLAMP WITH RING

MERRILL BROTHERS 1 TON CLAMP WITH RING

  • Goffstown, New Hampshire, United States
  • May 24th
Mill clamp assortment, hold down, heel clamp, step block, 30+ pcs., heavy duty

Mill clamp assortment, hold down, heel clamp, step block, 30+ pcs., heavy duty

  • Minneapolis, Minnesota, United States
  • May 24th
Williams FJ-30 Industrial Pipe Line Separator Flange Jack ~Refurbished~

Williams FJ-30 Industrial Pipe Line Separator Flange Jack ~Refurbished~

  • Denver, Colorado, United States
  • May 24th
Set-TRU'Precision Self-Centering Scroll Chuck - Chuck Size: 8'

Set-TRU'Precision Self-Centering Scroll Chuck - Chuck Size: 8'

  • Duncan, South Carolina, United States
  • May 25th
OTMT 10029 4 Jaw Chuck

OTMT 10029 4 Jaw Chuck

  • Duncan, South Carolina, United States
  • May 25th
TMX 3-866-0800Z 8' 3 Jaw SET-TRU Semi-Steel Scroll Chuck, 0.0006' T.I.R.

TMX 3-866-0800Z 8' 3 Jaw SET-TRU Semi-Steel Scroll Chuck, 0.0006' T.I.R.

  • Duncan, South Carolina, United States
  • May 25th
Vintage Small Machinist Tool Holder, Vise, Unmarked, Slide Bar, Tightens Nicely

Vintage Small Machinist Tool Holder, Vise, Unmarked, Slide Bar, Tightens Nicely

  • Troy, Maine, United States
  • May 25th
Stand Bench Grinder Pedestal New Home Power Handheld Tool Shop PING

Stand Bench Grinder Pedestal New Home Power Handheld Tool Shop PING

  • Miami, Florida, United States
  • May 25th
KURT D40 Precision Machine Vise Mill Milling

KURT D40 Precision Machine Vise Mill Milling

  • Calimesa, California, United States
  • May 25th
PRECISION BRAND * ARBOR SHIMS 3/4 X 1-1/8 X .008 BAG OF 20 NIB

PRECISION BRAND * ARBOR SHIMS 3/4 X 1-1/8 X .008 BAG OF 20 NIB

  • Sunman, Indiana, United States
  • Jun 3rd
OKO Magnets, 2-7/8" Square Magnetic on-off V-Block Machinist Workholding

OKO Magnets, 2-7/8" Square Magnetic on-off V-Block Machinist Workholding

  • Pierson, Michigan, United States
  • Jun 3rd
Carr Lane JNC2124 Chuck Jaw T-Nut 4-1/8"long 1-1/8"Wide 11/16" groove width

Carr Lane JNC2124 Chuck Jaw T-Nut 4-1/8"long 1-1/8"Wide 11/16" groove width

  • Middlebury, Indiana, United States
  • Jun 3rd
EIMELDINGEN 48" ROUND PLATE, 30" ROUND TABLE, 8" T/SLOT, CNC ROTARY TABLE

EIMELDINGEN 48" ROUND PLATE, 30" ROUND TABLE, 8" T/SLOT, CNC ROTARY TABLE

  • Dallas, Texas, United States
  • Jun 6th
6" precision H1ORIZONTAL & VERTICAL ROTARY TABLE ISO9001 Part#TSL150- NEW

6" precision H1ORIZONTAL & VERTICAL ROTARY TABLE ISO9001 Part#TSL150- NEW

  • Madison Heights, Michigan, United States
  • Jun 6th
Tsudakoma 8-3/4" Dia. Twin NC Rotary Table Unit, # RNCV-201R2, Used

Tsudakoma 8-3/4" Dia. Twin NC Rotary Table Unit, # RNCV-201R2, Used

  • Grand Rapids, Michigan, United States
  • Jun 6th
3.8” x 3.7” x 4” Vee Block

3.8” x 3.7” x 4” Vee Block

  • Euclid, Ohio, United States
  • Jun 7th
4” x 3.75” x 2.25” Vee Block

4” x 3.75” x 2.25” Vee Block

  • Euclid, Ohio, United States
  • Jun 7th
Lot of 9 Kastalon P04-000029833 Gray Internal Gripper Pads

Lot of 9 Kastalon P04-000029833 Gray Internal Gripper Pads

  • Jun 7th
Creativity Essentials A5 Clear Stamps-Geometric Neon

Creativity Essentials A5 Clear Stamps-Geometric Neon

  • Hickory Hills, Illinois, United States
  • Jun 10th
"Oak E-Z Stitch Extender Bars 8""- "

"Oak E-Z Stitch Extender Bars 8""- "

  • Hickory Hills, Illinois, United States
  • Jun 10th
Ultimate Pin Caddy-W/15 Pins

Ultimate Pin Caddy-W/15 Pins

  • Hickory Hills, Illinois, United States
  • Jun 10th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies