+ Post new Ad
Rule 1500Mm * Straight, US $496.65 – Picture 0
Rule 1500Mm * Straight, US $496.65 – Picture 0

Rule 1500mm * Straight

US $496.65

  • Garca, Mexico
  • Jul 27th
Open on mobile:
QR code
Rule 1500mm * straight (illustrative images, the actual product may vary) Rigid steel rule Dasqua brand. Rigid ruler manufactured with high strength steel Manufactured according to the DIN874 standard Graduation in inches Grade 1 Long: 1500 mm High: 60 mm Width: 12 mm Product guarantee All the products that we sell have a guarantee which can make valid directly with us *. It is necessary to remember that the guarantee comes as long as the product is claimed by a real factory defect and not by mishandling or abuse of the tool. * None of our power tools, pneumatic, hydraulic cats, hoists, welding machines, inverters and measuring equipment are accepted in return. These should be brought to any service center authorized by the product manufacturer.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Weston Tools
Type Does Not Apply
EAN Does Not Apply
Voltage Does Not Apply
Guarantee No
Battery Included Does Not Apply

Directions

Similar products from Rulers

Straight Edge Ruler Engine Block Cylinder Head Inspection Layout Tool 24 Inch

Straight Edge Ruler Engine Block Cylinder Head Inspection Layout Tool 24 Inch

  • Multiple Locations, United States
  • Jul 27th
(C637E-150, 1) - Starrett C637E-150 Spring Tempered Steel Rule With Millimetre

(C637E-150, 1) - Starrett C637E-150 Spring Tempered Steel Rule With Millimetre

  • Commerce, CA, United States
  • Jul 27th
Semi-Rigid Steel Rule 12 "

Semi-Rigid Steel Rule 12 "

  • Garca, Mexico
  • Jul 27th
Mitutoyo 180-201 Hardened Center Head 6" For Combination Square Set Japan

Mitutoyo 180-201 Hardened Center Head 6" For Combination Square Set Japan

  • Fruita, Colorado, United States
  • Jul 27th
Starrett 6 " Satin Rule 604R Tempered

Starrett 6 " Satin Rule 604R Tempered

  • Ocean Gate, New Jersey, United States
  • Jul 27th
CRAFTSMAN 3/4 INCH DRIVE 1 INCH HEX IMPACT SOCKET USA MADE NO. 15962 CODE: -K-

CRAFTSMAN 3/4 INCH DRIVE 1 INCH HEX IMPACT SOCKET USA MADE NO. 15962 CODE: -K-

  • Marion, North Carolina, United States
  • Jul 27th
4 -STARRETT No.604R 12” Hook Rule Spring-Tempered Steel Rule USA

4 -STARRETT No.604R 12” Hook Rule Spring-Tempered Steel Rule USA

  • Orange, Massachusetts, United States
  • Jul 27th
Semi-Rigid Steel Rule 8

Semi-Rigid Steel Rule 8

  • Garca, Mexico
  • Jul 27th
Rule 2000Mm * Straight

Rule 2000Mm * Straight

  • Garca, Mexico
  • Jul 27th
Steel Rule Semi Rigid 20

Steel Rule Semi Rigid 20

  • Garca, Mexico
  • Jul 27th
Rule For Mechanic 6 With Clip

Rule For Mechanic 6 With Clip

  • Garca, Mexico
  • Jul 27th
VINTAGE L.S. STARRETT CO. NO. 604R 9" STEEL RULE / RULER

VINTAGE L.S. STARRETT CO. NO. 604R 9" STEEL RULE / RULER

  • Mansfield, Ohio, United States
  • Jul 27th
LUFKIN 84A 12" SHRINK RULE 1-16 to FOOT IN STOCK!! VINTAGE!!

LUFKIN 84A 12" SHRINK RULE 1-16 to FOOT IN STOCK!! VINTAGE!!

  • Chicago, Illinois, United States
  • Jul 27th
Starrett No.C304R-6 Steel Rule with Inch Grad, No.16 General Multi-use Gage

Starrett No.C304R-6 Steel Rule with Inch Grad, No.16 General Multi-use Gage

  • Racine, Wisconsin, United States
  • Jul 26th
Vintage Starrett No. 604RE Machinist 12" Rule Machinist Tool Made In USA

Vintage Starrett No. 604RE Machinist 12" Rule Machinist Tool Made In USA

  • Clemmons, North Carolina, United States
  • Jul 26th
Shinwa H101-C 300 mm Rigid"Zero Glare" Metric Machinist Ruler/Rule Scale .5 m...

Shinwa H101-C 300 mm Rigid"Zero Glare" Metric Machinist Ruler/Rule Scale .5 m...

  • Phoenix, AZ, United States
  • Jul 26th
Brown & Sharpe 99-7030-9999 CASE ONLY for Bestest Dial Indicators

Brown & Sharpe 99-7030-9999 CASE ONLY for Bestest Dial Indicators

  • Commack, New York, United States
  • Jul 26th
Starrett 12 inch Flexible Scale

Starrett 12 inch Flexible Scale

  • Clarkston, Michigan, United States
  • Jul 26th
General Tools Industrial Steel Rules, 6 in X 15/32 in, Polished Stainless Steel,

General Tools Industrial Steel Rules, 6 in X 15/32 in, Polished Stainless Steel,

  • Norristown, Pennsylvania, United States
  • Jul 26th
VINTAGE STARRETT 6 INCH METAL MACHNIST RULER NO.604R & EXTRAS

VINTAGE STARRETT 6 INCH METAL MACHNIST RULER NO.604R & EXTRAS

  • Middle River, Maryland, United States
  • Jul 26th

People who viewed this item also vieved

Starrett 123 Master Bar Vernier Caliper 26" .001" DD13

Starrett 123 Master Bar Vernier Caliper 26" .001" DD13

  • Bloomfield, Connecticut, United States
  • Jan 30th
Vintage Millers Falls #112 Micrometer in Goodell Pratt Box/Starrett Instructions

Vintage Millers Falls #112 Micrometer in Goodell Pratt Box/Starrett Instructions

  • Brainerd, Minnesota, United States
  • Jan 30th
Starret HB400 Digital Optical Comparitor

Starret HB400 Digital Optical Comparitor

  • Goose Creek, South Carolina, United States
  • Jan 30th
Renishaw CMM PHC9 Motorized Probe Head Controller IEEE Tested 90 Day Warranty

Renishaw CMM PHC9 Motorized Probe Head Controller IEEE Tested 90 Day Warranty

  • Minneapolis, Minnesota, United States
  • Jan 30th
Starrett No. 278 V Blocks & Clamps Machinst Tools

Starrett No. 278 V Blocks & Clamps Machinst Tools

  • Etna Green, Indiana, United States
  • Jan 30th
Ford (22) pc. Vintage complete C.E. Johansson block gauge set

Ford (22) pc. Vintage complete C.E. Johansson block gauge set

  • Toledo, Ohio, United States
  • Jan 30th
RARE VINTAGE STARRETT DIAL INDICATOR WITH ORIGINAL BOX & MANUAL

RARE VINTAGE STARRETT DIAL INDICATOR WITH ORIGINAL BOX & MANUAL

  • Tampa, Florida, United States
  • Jan 30th
starrett universal dial test indicator catalog number 196a

starrett universal dial test indicator catalog number 196a

  • Farwell, Nebraska, United States
  • Jan 30th
Set of bore gauges from .24-10

Set of bore gauges from .24-10

  • Ogden, Utah, United States
  • Jan 30th
Tohnichi Torque Gauge 3.6 BTG

Tohnichi Torque Gauge 3.6 BTG

  • Mission, Texas, United States
  • Jan 30th
Starrett No. 657 magnetic base + No. 711 last word set + original wooden box

Starrett No. 657 magnetic base + No. 711 last word set + original wooden box

  • Crown Point, Indiana, United States
  • Jan 30th
Noga NF0037 Magnetic Holder Bed - Holding Power: 72 lbs. Dimensions: 1.58" x 1.

Noga NF0037 Magnetic Holder Bed - Holding Power: 72 lbs. Dimensions: 1.58" x 1.

  • Duncan, South Carolina, United States
  • Jan 30th
The Lufkin Rule Co #513 Micrometer Depth Gage with Original Wood Case

The Lufkin Rule Co #513 Micrometer Depth Gage with Original Wood Case

  • San Clemente, California, United States
  • Jan 30th
Mitutoyo 293-340 Digimatic Outside Micrometer, 0-1" Range, 0.00005"/0.001mm IP65

Mitutoyo 293-340 Digimatic Outside Micrometer, 0-1" Range, 0.00005"/0.001mm IP65

  • Lynnwood, Washington, United States
  • Jan 30th
MACHINIST TOOL LATHE NICE Fujita Machinist Level in Case # F10793

MACHINIST TOOL LATHE NICE Fujita Machinist Level in Case # F10793

  • Morris Plains, New Jersey, United States
  • Jan 30th
MACHINIST TOOL LATHE Starrett 15" Master Precision Machinist Level Wood Case Box

MACHINIST TOOL LATHE Starrett 15" Master Precision Machinist Level Wood Case Box

  • Morris Plains, New Jersey, United States
  • Jan 30th
24" Combination Square Protractor 4 Pc Set Ruler New

24" Combination Square Protractor 4 Pc Set Ruler New

  • Taylorsville, Utah, United States
  • Jan 30th
Starrett C491-12-4R Reversible Bevel Protractor W/ Black Wrinkle Finish,

Starrett C491-12-4R Reversible Bevel Protractor W/ Black Wrinkle Finish,

  • Cleveland, Ohio, United States
  • Jan 30th
one lot LS Starrett, Athol MA, No. 4, No. 490 combination square 4773-60

one lot LS Starrett, Athol MA, No. 4, No. 490 combination square 4773-60

  • Hillsdale, New Jersey, United States
  • Jan 30th
VINTAGE 4'' STARRETT SQUARE NO. 13 MACHINIST SQUARE

VINTAGE 4'' STARRETT SQUARE NO. 13 MACHINIST SQUARE

  • Elgin, Illinois, United States
  • Jan 30th
GRANITE SURFACE PLATE 60'' X 48'' X 8''

GRANITE SURFACE PLATE 60'' X 48'' X 8''

  • Euclid, Ohio, United States
  • Jan 30th
Challenge Machine Surface Plate 18" X 192" X 6"

Challenge Machine Surface Plate 18" X 192" X 6"

  • Fleetwood, Pennsylvania, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies