+ Post new Ad
Rule 2000Mm * Straight, US $651.79 – Picture 0
Rule 2000Mm * Straight, US $651.79 – Picture 0

Rule 2000mm * Straight

US $651.79

  • Garca, Mexico
  • Jul 27th
Open on mobile:
QR code
Rule 2000mm * straight (illustrative images, the real product may vary) Rigid steel rule Dasqua brand. Rigid ruler manufactured with high strength steel Manufactured according to the DIN874 standard Graduation in inches Grade 1 Long: 2000 mm High: 70 mm Width: 15 mm Product guarantee All the products that we sell have a guarantee which can make valid directly with us *. It is necessary to remember that the guarantee comes as long as the product is claimed by a real factory defect and not by mishandling or abuse of the tool. * None of our power tools, pneumatic, hydraulic cats, hoists, welding machines, inverters and measuring equipment are accepted in return. These should be brought to any service center authorized by the product manufacturer.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Weston Tools
Type Does Not Apply
EAN Does Not Apply
Voltage Does Not Apply
Guarantee No
Battery Included Does Not Apply

Directions

Similar products from Rulers

24" Scale Rule Black Chrome "High Contrast" Machinist / Sheet Metal / Engineer

24" Scale Rule Black Chrome "High Contrast" Machinist / Sheet Metal / Engineer

  • Rose Hill, Kansas, United States
  • Jul 28th
Fowler no. 824S 6” Rigid Machinist Ruler

Fowler no. 824S 6” Rigid Machinist Ruler

  • Milford, New Hampshire, United States
  • Jul 28th
Straight Edge Ruler Engine Block Cylinder Head Inspection Layout Tool 24 Inch

Straight Edge Ruler Engine Block Cylinder Head Inspection Layout Tool 24 Inch

  • Multiple Locations, United States
  • Jul 27th
(C637E-150, 1) - Starrett C637E-150 Spring Tempered Steel Rule With Millimetre

(C637E-150, 1) - Starrett C637E-150 Spring Tempered Steel Rule With Millimetre

  • Commerce, CA, United States
  • Jul 27th
Semi-Rigid Steel Rule 12 "

Semi-Rigid Steel Rule 12 "

  • Garca, Mexico
  • Jul 27th
Mitutoyo 180-201 Hardened Center Head 6" For Combination Square Set Japan

Mitutoyo 180-201 Hardened Center Head 6" For Combination Square Set Japan

  • Fruita, Colorado, United States
  • Jul 27th
Starrett 6 " Satin Rule 604R Tempered

Starrett 6 " Satin Rule 604R Tempered

  • Ocean Gate, New Jersey, United States
  • Jul 27th
CRAFTSMAN 3/4 INCH DRIVE 1 INCH HEX IMPACT SOCKET USA MADE NO. 15962 CODE: -K-

CRAFTSMAN 3/4 INCH DRIVE 1 INCH HEX IMPACT SOCKET USA MADE NO. 15962 CODE: -K-

  • Marion, North Carolina, United States
  • Jul 27th
4 -STARRETT No.604R 12” Hook Rule Spring-Tempered Steel Rule USA

4 -STARRETT No.604R 12” Hook Rule Spring-Tempered Steel Rule USA

  • Orange, Massachusetts, United States
  • Jul 27th
Semi-Rigid Steel Rule 8

Semi-Rigid Steel Rule 8

  • Garca, Mexico
  • Jul 27th
Steel Rule Semi Rigid 20

Steel Rule Semi Rigid 20

  • Garca, Mexico
  • Jul 27th
Rule 1500Mm * Straight

Rule 1500Mm * Straight

  • Garca, Mexico
  • Jul 27th
Rule For Mechanic 6 With Clip

Rule For Mechanic 6 With Clip

  • Garca, Mexico
  • Jul 27th
VINTAGE L.S. STARRETT CO. NO. 604R 9" STEEL RULE / RULER

VINTAGE L.S. STARRETT CO. NO. 604R 9" STEEL RULE / RULER

  • Mansfield, Ohio, United States
  • Jul 27th
LUFKIN 84A 12" SHRINK RULE 1-16 to FOOT IN STOCK!! VINTAGE!!

LUFKIN 84A 12" SHRINK RULE 1-16 to FOOT IN STOCK!! VINTAGE!!

  • Chicago, Illinois, United States
  • Jul 27th
Starrett No.C304R-6 Steel Rule with Inch Grad, No.16 General Multi-use Gage

Starrett No.C304R-6 Steel Rule with Inch Grad, No.16 General Multi-use Gage

  • Racine, Wisconsin, United States
  • Jul 26th
Vintage Starrett No. 604RE Machinist 12" Rule Machinist Tool Made In USA

Vintage Starrett No. 604RE Machinist 12" Rule Machinist Tool Made In USA

  • Clemmons, North Carolina, United States
  • Jul 26th
Shinwa H101-C 300 mm Rigid"Zero Glare" Metric Machinist Ruler/Rule Scale .5 m...

Shinwa H101-C 300 mm Rigid"Zero Glare" Metric Machinist Ruler/Rule Scale .5 m...

  • Phoenix, AZ, United States
  • Jul 26th
Brown & Sharpe 99-7030-9999 CASE ONLY for Bestest Dial Indicators

Brown & Sharpe 99-7030-9999 CASE ONLY for Bestest Dial Indicators

  • Commack, New York, United States
  • Jul 26th
Starrett 12 inch Flexible Scale

Starrett 12 inch Flexible Scale

  • Clarkston, Michigan, United States
  • Jul 26th

People who viewed this item also vieved

Mitutoyo 24" Vernier Caliper Stainless Steel V.N.C.

Mitutoyo 24" Vernier Caliper Stainless Steel V.N.C.

  • Rome, New York, United States
  • Jan 30th
Starrett 123 Master Bar Vernier Caliper 26" .001" DD13

Starrett 123 Master Bar Vernier Caliper 26" .001" DD13

  • Bloomfield, Connecticut, United States
  • Jan 30th
Renishaw Inspection Probe Stylus 0.125"x7" (~ 3x175) long cylinder A-5003-3816MC

Renishaw Inspection Probe Stylus 0.125"x7" (~ 3x175) long cylinder A-5003-3816MC

  • Algonquin, Illinois, United States
  • Jan 30th
Starret HB400 Digital Optical Comparitor

Starret HB400 Digital Optical Comparitor

  • Goose Creek, South Carolina, United States
  • Jan 30th
BROWN & SHARPE 920 PARALLEL LOT

BROWN & SHARPE 920 PARALLEL LOT

  • Redding, California, United States
  • Jan 30th
Starrett No. 278 V Blocks & Clamps Machinst Tools

Starrett No. 278 V Blocks & Clamps Machinst Tools

  • Etna Green, Indiana, United States
  • Jan 30th
MITUTOYO TRUE TEST METRIC DIAL TEST INDICATOR MACHINIST TOOL INSPECTIO (VE - BU)

MITUTOYO TRUE TEST METRIC DIAL TEST INDICATOR MACHINIST TOOL INSPECTIO (VE - BU)

  • Arlington, Texas, United States
  • Jan 30th
Enco Dial Indicator No. 682-05

Enco Dial Indicator No. 682-05

  • Kinderhook, New York, United States
  • Jan 30th
STARRETT 12 IN. POST AND SNUG FOR SURFACE GAGE, INSPECTION, MACHINIST, TOOLMAKER

STARRETT 12 IN. POST AND SNUG FOR SURFACE GAGE, INSPECTION, MACHINIST, TOOLMAKER

  • Mansfield, Ohio, United States
  • Jan 30th
SPI and McDonnel Douglas .160-.780 set of 100 degree CSK gages

SPI and McDonnel Douglas .160-.780 set of 100 degree CSK gages

  • Ogden, Utah, United States
  • Jan 30th
L S Starrett 657AA Magnetic Base Indicator Holder

L S Starrett 657AA Magnetic Base Indicator Holder

  • Garden Grove, California, United States
  • Jan 30th
Starrett No. 657 magnetic base + No. 711 last word set + original wooden box

Starrett No. 657 magnetic base + No. 711 last word set + original wooden box

  • Crown Point, Indiana, United States
  • Jan 30th
BROWN & SHARPE 599-603-123-3 Outside Micrometer,Range 0-3 In G8169244

BROWN & SHARPE 599-603-123-3 Outside Micrometer,Range 0-3 In G8169244

  • Waxhaw, North Carolina, United States
  • Jan 30th
MACHINIST TOOL LATHE Starrett Depth Micrometer Gage Gauge in Oak Case

MACHINIST TOOL LATHE Starrett Depth Micrometer Gage Gauge in Oak Case

  • Morris Plains, New Jersey, United States
  • Jan 30th
Brand New Spark Machine 3 Axis Digital Readout DRO for EDM High Cost Performance

Brand New Spark Machine 3 Axis Digital Readout DRO for EDM High Cost Performance

  • Shanghai, China
  • Jan 30th
SPI IP67 Water Proof Caliper 12-529-4 MSC #91097246

SPI IP67 Water Proof Caliper 12-529-4 MSC #91097246

  • Reno, Nevada, United States
  • Jan 30th
~Vintage~ BEVEL PROTRACTOR Sherr-Tumico made in Germany

~Vintage~ BEVEL PROTRACTOR Sherr-Tumico made in Germany

  • Coos Bay, Oregon, United States
  • Jan 30th
24" Combination Square Protractor 4 Pc Set Ruler New

24" Combination Square Protractor 4 Pc Set Ruler New

  • Taylorsville, Utah, United States
  • Jan 30th
Starrett No. 62 Rule Holder Stand Holds Rules From 3/4" To 1 9/16" Wide

Starrett No. 62 Rule Holder Stand Holds Rules From 3/4" To 1 9/16" Wide

  • Huntington, Indiana, United States
  • Jan 30th
starrett diemakers square 453-E

starrett diemakers square 453-E

  • Fort Wayne, Indiana, United States
  • Jan 30th
GRANITE SURFACE PLATE 60'' X 48'' X 8''

GRANITE SURFACE PLATE 60'' X 48'' X 8''

  • Euclid, Ohio, United States
  • Jan 30th
Challenge Machine Surface Plate 18" X 192" X 6"

Challenge Machine Surface Plate 18" X 192" X 6"

  • Fleetwood, Pennsylvania, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies