Rv 30 Amp Power Plug Receptable Shore Power Inlet Twist Lock Connector For

US $29.65

Miami, Florida, United States
Jul 18th

Open on mobile:
QR code

30 Days Return Policy Fast Delivery Trusted seller RV 30 amp Power Plug Receptable Shore Power Inlet Twist Lock Connector for Product Description 30Amp 125Volt,easy twist lock power inlet, NEMA L5-30R, ETL Approved, safe to use. RV 30 amp power cord inlet - Heavy-duty construction,corrosion resistant materials. 30 amp power connector - 3-wire:Black-Load(125Volt),White-Neutral,Green-Equipment ground. The twist lock plug requires the use of 8AWG or 10AWG wire.Note:Do not use the small gauge wire as this will result in overheating and possible electrical fire. Hole Saw(30amp 2-7/8hole saw).1/8”Drill Bit.Quickly locks the cord set to the power supply 30 amp shore power inlet. WARING: The inlet is not to be connected to power prior to installation.Failure to comply with this instruction could result in an electrical failure,fire and electrocution. New Installation 1. Determine mounting location in hull.Be careful that the location you select for the mounting hole does not go through any electrical wiring,plumbing or other obstruction.All power tools must be properly grounded. 2. Mark the installation location and cut opening in hull using hole saw(30amp 2-7/8”diameter hole.) 3. Place the inlet in the opening and align so that the inlet is square with the hull.Use the inlet as a template and mark the mounting hole location with a pencil.Remove inlet and drill mounting holes using 1/8”drill bit. 4. Remove the rear safety enclosure from the inlet. 5. Pull internal wiring through hull opening.Note:the 30amp inlet requires the use of 8AWG or 10AWG wire.Do not use the small gauge wire as this will result in overheating and possible electrical fire. 6. Thread the wiring through the rear safety enclosure and the strain relief on rear enclosure(if included),then slide the mounting gasket over the wiring. 7. Back off terminal screws on the rear housing of the inlet. 8. Strip wire end to 3/4.Make sure the wire strands are clean and not corroded.If necessary,cut back the wire until clean wire in uncovered.Do not solder the ends of the wire.Insert wires into color coded openings on the back of the inlet.Tighten terminal screws to 20 in.-lbs.torque.Make certain t is no wire insulation nder any terminal. 9. Tighten the strain relief clamp screws until they are tight around the wiring.Slide the rear safety enclosure onto the back of the inlet. 10. Position the gasket and inlet over the hull opening,align the mounting holes and attach the inlet to the hull with screws. 11. Use #8 pan head stainless steel screws to install the inlet. Shipping Returns Payment Shipping Shipping is FREE to all addresses other than APO/PO boxes in the lower 48 states. All our stock ships from US-based warehouses. Shipped via USPS or UPS (depending on location and package weight) Unless stated otherwise, all orders will ship within 24-72 hours of your payment being processed. Check our feedback to see the great reviews of FAST shipping we offer. Returns As our valued customer, we will do our best to make sure the product you receive arrives to you on time and as expected. If you are not satisfied with your purchase, please contact us within 30 days of receiving your order to process a return. Payment We currently accept payment via PayPal only. Once payment is cleared, we will dispatch your shipment within 1-3 business days. Please refer to the "Shipping" tab for more information regarding shipping speed to your destination.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Binding	Tools & Home Improvement
Label	Does Not Apply
Studio	Does Not Apply
Color	white
Size	30 Amp
Brand	Does Not Apply
Publisher	Does Not Apply
ProductGroup	Automotive Parts and Accessories
ProductTypeName	HOME_LIGHTING_ACCESSORY
Type	Does Not Apply
PackageQuantity	1
UPC	Does Not Apply
ManufacturerPartsWarrantyDescription	Parts
EAN	Does Not Apply
Manufacturer	Does Not Apply
MPN	Does Not Apply