Samsung Argo-16 20ns Timing Glonass/gps Receiver/2x1pps

US $6400

Guangzhou,GuangDong, China
Jan 30th

Open on mobile:
QR code

BUT i have NO the software to do more ????????a little shame.. Glogeo ARGO –16 High accuracy 1 PPS------------20ns...the GPS board is the 3.3v ,,,but if you want power it with the RS232 interface board. will need 12V Channel 16 The ability to track "L1 GPS (1575.42 MHz) and L1 GLONASS (1602 ~ 1610 MHz) " Power <1.35 watt 3.3 VDC (typical) Single-point accuracy of the location <10 m RTD difference accuracy <2.5 m Pulse functions and precision of <2.5 m Cold start-up time <180 s Hot start-up time <20 s Time to re-capture <1.5 s Serial communication port, "2 asynchronous communication port (TTL level) 2 output (PPS, system error) 2 input (reset the software to upload) " Other standard RS232 communications port interface (TTL level) Positioning output update rate 1HZ Raw data output update rate 1HZ RTK output update rate 1HZ The most affordable 3g acceleration Can work a maximum speed of <515 m / s May be the greatest work of a high degree of <18 km Operating Temperature -30 °C ~ +70 °C -------- Introduction Korean company is offering technology of low cost GPS/Glonass receiver for automobile, marine and portable applications. With its advanced design channel architecture, 16 universal channels "Agro-16" receiver can receive and process either GPS or Glonass satellite signals thus giving high performance with flexibility and versatility. 16 is the sufficient number for channels to provide highest performance with low cost and low power consumption. With the addition of GLONASS, the increased number of available satellites allows wider satellite coverage for position computation. It provides better position information in the areas where the satellites are liable to be blocked. The adaptive AGC (automatic Gain Control) scheme used in the receiver further enhances the reception of satellite signals resulting in better signal tracking as well as wider satellite coverage. The position accuracy with GPS alone can be severely degraded to the error of 100 m due to the influence of SA (Selective Availability). Stand-alone GPS/GLONASS position accuracy is typically within 10m. The addition of GLONASS not only improves the position accuracy but greatly enhances the velocity accuracy as well. The enhancement of position and velocity accuracy provides greater potential for integrated or hybrid navigation systems, which are gaining more popularity among many commercial applications. In addition to the standard features for differential corrections (RTCM), "ARGO-16" receiver is designed to fully support and process upcoming WAAS (Wide Area Augmentation System)/EGNOS (European Geostationary Navigation Overlay Sytem), which will provide comparable position accuracy without the corrections from remote reference stations. Area of Application: Electronics industry, telecommunications industry: automobiles, marine and portable applications Advantages: 16 universal channels assignable to any GPS, Glonass, WAAS/EGNOS satellites Adaptive AGC for tracking weak satellite signals NMEA0183 and binary protocol support accuracy 1 PPS (Pulse Per Second) output synchronised to either GPS time, Glonass time or UTC (US or Russia) Raw measurements Flexible user interface with 2 serial ports and discrete inputs and outputs Low power consumption (<1W at 3.3V DC) User selectable power saving mode "Keep-Alive" battery power Receiver autonomous integrity monitoring (RAIM) 3 types of antenna available software for future technical support Environmental Aspects: energy conservation Development Status: Prototype For further information please contact : -------------------------------------- I have power on it and get the some message from the RS-232...and 1pps.. BUT i have NO the software to do more ????????a little shame.. ------------- ship by China Post Air Mail(14-30 days) free worldwide... DHL 7 days 20 USD ---------------------