US $35.00
Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Brand | Sandvik |
Primary Application(s) | Ferrous Material, Steel | ||
Model | CPMT 06 02 04-MF 1025 | ||
Coating | TiN | ||
MPN | CPMT 06 02 04-MF 1025 | ||
Grade | 1025 |
Directions
Similar products from Carbide Inserts & Face Mills
VALENITE SNMA543 V88 Carbide Inserts * 8 * Pack Loc: J 3-4-1
Sandvik N365-1505ZNE-PE4 1030 Carbide Insert
Quadthread QEL100 6-C25 1" Square Insert Holder With 20X 5STACME K20C Inserts
AME 1 - 1/2 Spade Drill Insert Gen 2 T-A 433T-0116
Sandvik CNGP 12 04 02 1115 Carbide Inserts 6pc
Sandvik CCMT 3 (2.5) 0-MF 1125 Carbide Inserts 10pc
KENNAMETAL NJP3010L16 KC730 5/PK TOP NOTCH INSERTS **NEW**
SECO XOMX 180608TR-M14 F40M INSERTS 10/PK 03835 **NEW**
WALTER VALENITE ADMT080302R-F56 WKP35S (5886202) PK/10 **NEW**
Sandvik N151.3-300-25-7G 2145 Carbide Inserts 10pc
SNGA 643 GRADE 8200 Borazon 2 Pcs POLYCRYSTALINE CBN ON CARBIDE INSERT NAC USA
COMET CUB TRIGON DRILL WITH CARBIDE INSERTS/COOLANT TROUGH
New Iscar GSFN 5 Grooving Carbide Inserts, IC908 8ct
Seco DNMG433-M3 Carbide Turning and Profiling Inserts (pack of 10)
New! 10ct ISCAR GRIP 4020Y IC354
Staggered Teeth side milling cutter 80X8 (sn 130)
HANITA Staggered Teeth side milling cutter 6"X1/4X1.1/4" (sn 140)
COMOL Staggered Teeth side milling cutter 3"X1/4X1" (sn 131)
HANITA Staggered Teeth side milling cutter 6"X1/4X1.1/4" (sn 115)
HANITA Staggered Teeth side milling cutter 125X8X32 (sn 106)
People who viewed this item also vieved
duMont 5/16" - C Keyway Broach
HSS 15/16 INCH x 2 INCH ANNULAR CUTTER USED AS IS FREE STANDARD SHIPPING IN USA
PRESTIGE Ceramic Inserts SNGA 433-T2 CC20 Qty 6 [934]
KENNAMETAL Ceramic Turning Inserts RCGV 35-T0420 KY4300 Qty 10 [934]
1/2" SGS 4 flute soild carbide lot of 2
11/32" Data Flute Solid Carbide .020CR TiCN 3 FL End Mill M744
*NEW* (4) NOS HARVEY'S BIO 520 CUTTING OIL FRESHENER ACTIVE ENZYME CLEANING KIT
*NEW* (5) NOS HARVEY'S BIO 520 CUTTING OIL FRESHENER ACTIVE ENZYME CLEANING KIT
! NEW ! DANLY DIE SET DEMOUNTABLE BUSHINGS 6-10-56, FOR 1-1/4 SHAFT (PAIR)
3/8 - 24 RH Hex threading die DTC USA NF machinist toolmaker
Set of Four 1/16", 5/64", 3/32", & 7/64" HSS CHUCKING REAMERS
BURNISHING *COGSDILL TOOL* O.D. BURNISHER RFS 4327 -
PLAIN STRAIGHT TOOTH MILLING CUTTER 2-47/64 X 23/64 X 1 X 1/4 KS #8565
PLAIN METAL SLITTING SAW CUTTER B&S 12-.081-HS #81 2-49/64 X 0.082 X 1 #8581
Weldon USA - 100 Deg., CSA-8, Countersink machinist aviation aircraft tool
American Carbide Tool PCD Tool Bit for Lead Angle Turning, Left Hand
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies