+ Post new Ad
SANDVIK SANDFLEX DRAGON (MATRIX II ) 11' 0" 1" W X .035 T X 5/8" TOOTH TYPE, US $49.50 – Picture 0
SANDVIK SANDFLEX DRAGON (MATRIX II ) 11' 0" 1" W X .035 T X 5/8" TOOTH TYPE, US $49.50 – Picture 0

Sandvik Sandflex Dragon (matrix Ii ) 11' 0" 1" W X .035 T X 5/8" Tooth Type

US $49.50

  • Springfield, New Hampshire, United States
  • Jun 9th
Open on mobile:
QR code
The tooth type measures 5/8 inches. The Sandvik Sandflex Dragon (Matrix II) measures 11 feet and 1 inch in length, with a 1 inch width and .035 thickness. This Sandvik/Milford 3850 blade shows rust from shelf storage, but the teeth are in new condition.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand SANDVIK

Directions

Similar products from Saws & Sawblades

3/8" Dia x 1" Cut TCT Tipped Flush Trim Router Bit, Bright, TopTech Tool

3/8" Dia x 1" Cut TCT Tipped Flush Trim Router Bit, Bright, TopTech Tool

  • Ontario, Canada
  • Jun 9th
LOT OF 7 HSS SLITTING SLOTTING SAWS 2-1/2 - 6" NATIONAL, UNION TWIST, & B&S

LOT OF 7 HSS SLITTING SLOTTING SAWS 2-1/2 - 6" NATIONAL, UNION TWIST, & B&S

  • Ellington, New York, United States
  • Jun 9th
15mm Carbide Tipped Cylinder (Hinge) Boring Bits Left Hand, TopTech Tool

15mm Carbide Tipped Cylinder (Hinge) Boring Bits Left Hand, TopTech Tool

  • Ontario, Canada
  • Jun 9th
35mm Carbide Tipped Cylinder (Hinge) Boring Bits Right Hand, TopTech Tool

35mm Carbide Tipped Cylinder (Hinge) Boring Bits Right Hand, TopTech Tool

  • Ontario, Canada
  • Jun 9th
LOT OF 10 HSS CUTOFF BLADES 31/64 TO 1-1/8" ARMSTRONG EMPIRE CLEVELAND

LOT OF 10 HSS CUTOFF BLADES 31/64 TO 1-1/8" ARMSTRONG EMPIRE CLEVELAND

  • Ellington, New York, United States
  • Jun 9th
MILLING SLOT SLOTTING CUTTER 5" X 3/4" X 1-1/4" - MADE IN USA

MILLING SLOT SLOTTING CUTTER 5" X 3/4" X 1-1/4" - MADE IN USA

  • Ojai, California, United States
  • Jun 9th
MILLING SLOT SLOTTING CUTTER 6" X 11/64" X 1" - MADE IN USA

MILLING SLOT SLOTTING CUTTER 6" X 11/64" X 1" - MADE IN USA

  • Ojai, California, United States
  • Jun 9th
Dewalt Bandsaw Model D28770

Dewalt Bandsaw Model D28770

  • Wichita, Kansas, United States
  • Jun 9th
10mm Carbide Tip Hinge Boring Bit(Brad Point Boring Bit) Left Hand, TopTech Tool

10mm Carbide Tip Hinge Boring Bit(Brad Point Boring Bit) Left Hand, TopTech Tool

  • Ontario, Canada
  • Jun 9th
5mm Carbide Tip Hinge Boring Bit(Brad Point Boring Bit) Right Hand,TopTech Tool

5mm Carbide Tip Hinge Boring Bit(Brad Point Boring Bit) Right Hand,TopTech Tool

  • Ontario, Canada
  • Jun 9th
DEWALT 4-1/2 in. - 100X Segmented Rim Diamond Blade DW4713 NIB Concrete / Block

DEWALT 4-1/2 in. - 100X Segmented Rim Diamond Blade DW4713 NIB Concrete / Block

  • Malden, Massachusetts, United States
  • Jun 9th
DeWALT XP Diamond 4 1/2" Turbo Rim Smooth Cutting Wet/Dry #DW4701 BRAND NEW

DeWALT XP Diamond 4 1/2" Turbo Rim Smooth Cutting Wet/Dry #DW4701 BRAND NEW

  • New Paltz, New York, United States
  • Jun 9th
IVY CLASSIC Swift Cut Premium Diamond 4 1/2" Tile Dry #37062 BRAND NEW Tile etc

IVY CLASSIC Swift Cut Premium Diamond 4 1/2" Tile Dry #37062 BRAND NEW Tile etc

  • New Paltz, New York, United States
  • Jun 9th
STAR M-200 Shade Cutter - for window blinds and shades

STAR M-200 Shade Cutter - for window blinds and shades

  • Port Byron, Illinois, United States
  • Jun 9th
MORSE Metal Slitting Saw Blad 4 X 1/32 X 1 Plain Tooth #1841 HSS ,UK Qty- 2 each

MORSE Metal Slitting Saw Blad 4 X 1/32 X 1 Plain Tooth #1841 HSS ,UK Qty- 2 each

  • Las Vegas, Nevada, United States
  • Jun 9th
Two (2) BNIB Lenox Classic 4 TPI Band Saw Blade 12'10" x 1 1/4" x .042"

Two (2) BNIB Lenox Classic 4 TPI Band Saw Blade 12'10" x 1 1/4" x .042"

  • Forestville, New York, United States
  • Jun 9th
NWOT STIHL 14" 350MM Diamond Cutting Blade Wheel Concrete Asphalt Brick Block

NWOT STIHL 14" 350MM Diamond Cutting Blade Wheel Concrete Asphalt Brick Block

  • Virginia Beach, Virginia, United States
  • Jun 9th
New 60 Degree Durable High Quality Roland Cutting Blade For Cutting Plotter

New 60 Degree Durable High Quality Roland Cutting Blade For Cutting Plotter

  • CN, China
  • Jun 9th
6 Starrett RS 1214-5 Hacksaw High Speed Steel 12" x 1" - 14T STB

6 Starrett RS 1214-5 Hacksaw High Speed Steel 12" x 1" - 14T STB

  • Butler, New Jersey, United States
  • Jun 9th
Used Milling Cutter 2-3/4 X .420 X 1

Used Milling Cutter 2-3/4 X .420 X 1

  • Kelly, North Carolina, United States
  • Jun 9th

People who viewed this item also vieved

BLAIR #13200 (1/4") SHEET METAL CUTTER-13,000 SERIES (2 PCS)

BLAIR #13200 (1/4") SHEET METAL CUTTER-13,000 SERIES (2 PCS)

  • East China, Michigan, United States
  • Jan 30th
BLAIR #13214 (3/8") "DOUBLE CUT" SHEET METAL CUTTER-13,000 SERIES

BLAIR #13214 (3/8") "DOUBLE CUT" SHEET METAL CUTTER-13,000 SERIES

  • East China, Michigan, United States
  • Jan 30th
R216.42-16030-AK26A H10F 16 MM Sandvik Coromant Carbide CoroMill Plura End Mill

R216.42-16030-AK26A H10F 16 MM Sandvik Coromant Carbide CoroMill Plura End Mill

  • Minneapolis, Minnesota, United States
  • Jan 30th
R390 17 04 24E-PM 1025 SANDVIK *** 15 INSERTS *** FACTORY PACK ***

R390 17 04 24E-PM 1025 SANDVIK *** 15 INSERTS *** FACTORY PACK ***

  • Minneapolis, Minnesota, United States
  • Jan 30th
Stellram TNG 433 2T Ceramic Inserts NEW Qty/10 EDP 29442 tngn220412t

Stellram TNG 433 2T Ceramic Inserts NEW Qty/10 EDP 29442 tngn220412t

  • Bethel Park, Pennsylvania, United States
  • Jan 30th
KENNAMETAL CNGN120712T01020 CNG453T0420 KYS25 Kendex Ceramic Inserts Box of 3 J8

KENNAMETAL CNGN120712T01020 CNG453T0420 KYS25 Kendex Ceramic Inserts Box of 3 J8

  • Saint Louis, Missouri, United States
  • Jan 30th
1/8" Dia 4 Flute LongReach ALTiN Carbide Ball End Mill Kyocera USA 1845-1250L590

1/8" Dia 4 Flute LongReach ALTiN Carbide Ball End Mill Kyocera USA 1845-1250L590

  • Seminole, Florida, United States
  • Jan 30th
1/2" Diameter 2 Flute 90° Deg Point Melin USA Drill End Mill TiCN Carbide #46089

1/2" Diameter 2 Flute 90° Deg Point Melin USA Drill End Mill TiCN Carbide #46089

  • Seminole, Florida, United States
  • Jan 30th
2 NEW IMCO 1/4" (.250) SHANK CARBIDE BURR. 3/16" DIA. DOUBLE CUT USA MADE {E419}

2 NEW IMCO 1/4" (.250) SHANK CARBIDE BURR. 3/16" DIA. DOUBLE CUT USA MADE {E419}

  • Mentor, Ohio, United States
  • Jan 30th
2 NEW 6 MM SHANK CARBIDE BURRS FOR CUTTING ALUMINUM. METRIC. MADE IN USA {E186}

2 NEW 6 MM SHANK CARBIDE BURRS FOR CUTTING ALUMINUM. METRIC. MADE IN USA {E186}

  • Mentor, Ohio, United States
  • Jan 30th
2-1/8-8 X 3-1/2" hex die USA (930-37)

2-1/8-8 X 3-1/2" hex die USA (930-37)

  • Oxford, Pennsylvania, United States
  • Jan 30th
1-7/8-5 ns X 3-1/2" hex die Morse USA (930-36)

1-7/8-5 ns X 3-1/2" hex die Morse USA (930-36)

  • Oxford, Pennsylvania, United States
  • Jan 30th
Machinist tools,expansion reamer 1-11/32" to 1-1/2"

Machinist tools,expansion reamer 1-11/32" to 1-1/2"

  • Bennington, New Hampshire, United States
  • Jan 30th
4MM X 100MM HRC40 CUTTING SOLID CARBIDE REAMER

4MM X 100MM HRC40 CUTTING SOLID CARBIDE REAMER

  • --, Hong Kong
  • Jan 30th
5X 60 Degree ROLAND CRICUT GCC VINYL CUTTER PLOTTER BLADE

5X 60 Degree ROLAND CRICUT GCC VINYL CUTTER PLOTTER BLADE

  • Shanghai, China
  • Jan 30th
5X 30° ROLAND CRICUT GCC VINYL CUTTER PLOTTER BLADE

5X 30° ROLAND CRICUT GCC VINYL CUTTER PLOTTER BLADE

  • Shanghai, China
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies