+ Post new Ad
SANDVIK USED 1.250" INSERT COOLANT DRILL RA416.1-1250-40-55 (?1.50" SHANK), US $85.00 – Picture 0
SANDVIK USED 1.250" INSERT COOLANT DRILL RA416.1-1250-40-55 (?1.50" SHANK), US $85.00 – Picture 0

Sandvik Used 1.250" Insert Coolant Drill Ra416.1-1250-40-55 (?1.50" Shank)

US $85.00

  • Waterloo, Wisconsin, United States
  • Jan 30th
Open on mobile:
QR code
SANDVIK USED 1.250" INSERT COOLANT DRILL RA416.1-1250-40-55 (Ø1.50" SHANK) SANDVIK U.S.A   PART #RA416.1-1250-40-55 DIAMETER: 1.250 SHANK: 1.50"     BID IS FOR 1  USED INSERT COOLANT DRILL   I only accept Paypal! Only exception is if picking up locally! If you are picking up, email prior to buying! Item(s) will be shipped Priority Mail in a Flat Rate box. If you are planning on buying multiple items, please email me! I will only charge shipping on the largest flat rate box needed to ship everything together! I will be adding a lot of tools and inserts that have been sitting on the shelf for a while! If you have a proposition, please email me and we might be able to work something out! I will try and detail everything as best as I can and hopefully pictures can tell you more than I can. If you have any questions about anything, email me and I will get back to you as soon as possible. If there is something amiss with your items, let me know! Thank you for looking and hopefully for your business!  
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “DRILL IS IN GOOD USEABLE CONDITION EXCEPT FOR A FEW MINOR DINGS AND SCRATCHES. INSERT POCKETS LOOK GOOD”

Directions

Similar products from Coolant Gun Drills

NEW! Sandvik Coromant Drill Bit R411.5-17554D17.50 P20

NEW! Sandvik Coromant Drill Bit R411.5-17554D17.50 P20

  • Cleveland, Ohio, United States
  • Jan 30th
AMEC Series #2 part #25020H-125F Spade Drill with through coolant. Extended lgh

AMEC Series #2 part #25020H-125F Spade Drill with through coolant. Extended lgh

  • Duluth, Minnesota, United States
  • Jan 30th
AMEC Series 1.5 part #24015H-0041S060 Spade Drill with through coolant. 15/16

AMEC Series 1.5 part #24015H-0041S060 Spade Drill with through coolant. 15/16

  • Duluth, Minnesota, United States
  • Jan 30th
USED EL DORADO CARBIDE TIPPED GUN DRILL .375" +/- Dia. x .750" Shank x 16.00"OAL

USED EL DORADO CARBIDE TIPPED GUN DRILL .375" +/- Dia. x .750" Shank x 16.00"OAL

  • Fairfield, Iowa, United States
  • Jan 30th
New PTD 7/32 Taper Length Drill Bit Coolant Tin Precision Twist Drill Co

New PTD 7/32 Taper Length Drill Bit Coolant Tin Precision Twist Drill Co

  • Tujunga, California, United States
  • Jan 30th
1 ISCAR CHAM DRILL. DCM 115-057-16A-5D. CUT DIAMETER 11.5 MM COOLANT THRU (C15)

1 ISCAR CHAM DRILL. DCM 115-057-16A-5D. CUT DIAMETER 11.5 MM COOLANT THRU (C15)

  • Mentor, Ohio, United States
  • Jan 30th
Starcut .7280 x 7" Carbide Tipped Gun Drill 2 Flute

Starcut .7280 x 7" Carbide Tipped Gun Drill 2 Flute

  • Johnson City, New York, United States
  • Jan 30th
Sandvik Coromant RA416.2-0656P19-41 Indexable Insert Coolant Drill

Sandvik Coromant RA416.2-0656P19-41 Indexable Insert Coolant Drill

  • Johnson City, New York, United States
  • Jan 30th
KENNAMETAL KM50 INSERT DRILL KM50KUB1500 1.500" Nice condition.

KENNAMETAL KM50 INSERT DRILL KM50KUB1500 1.500" Nice condition.

  • Enfield, Connecticut, United States
  • Jan 30th
CJT/KOOLCARB COOLANT FED CARBIDE TIPPED 1" DRILL TYPE 170

CJT/KOOLCARB COOLANT FED CARBIDE TIPPED 1" DRILL TYPE 170

  • Wadley, Alabama, United States
  • Jan 30th
MORSE 1.040 COOLANT FED CORE DRILL HSS

MORSE 1.040 COOLANT FED CORE DRILL HSS

  • Wadley, Alabama, United States
  • Jan 30th
31/32 COOLANT FED HSS DRILL BIT FRANCE

31/32 COOLANT FED HSS DRILL BIT FRANCE

  • Wadley, Alabama, United States
  • Jan 30th
DCM 250-075-25A-3D CHAMDRILL indexable head drills, with 3xD drilling - Iscar

DCM 250-075-25A-3D CHAMDRILL indexable head drills, with 3xD drilling - Iscar

  • Irwin, Pennsylvania, United States
  • Jan 30th
Used 37/64 inch Oil Hole Drill 7 inches Long

Used 37/64 inch Oil Hole Drill 7 inches Long

  • Lake Placid, Florida, United States
  • Jan 30th
Used 17/32 inch Oil Hole Drill 7.5 inches Long

Used 17/32 inch Oil Hole Drill 7.5 inches Long

  • Lake Placid, Florida, United States
  • Jan 30th
Used 31/64 inch Oil Hole Drill 5.5 inches Long

Used 31/64 inch Oil Hole Drill 5.5 inches Long

  • Lake Placid, Florida, United States
  • Jan 30th
Used 31/64 inch Oil Hole Drill 5 inches Long

Used 31/64 inch Oil Hole Drill 5 inches Long

  • Lake Placid, Florida, United States
  • Jan 30th
Used 0.700 inch Oil Hole Drill 9.75 inches Long

Used 0.700 inch Oil Hole Drill 9.75 inches Long

  • Lake Placid, Florida, United States
  • Jan 30th
National 1-13/32" High Speed Straight Shank Twist Drill *NEW IN BOX*

National 1-13/32" High Speed Straight Shank Twist Drill *NEW IN BOX*

  • West Warren, Massachusetts, United States
  • Jan 30th
KENNAMETAL KUB INDEXABLE DRILL KUB-0937-0200

KENNAMETAL KUB INDEXABLE DRILL KUB-0937-0200

  • Galax, Virginia, United States
  • Jan 30th

People who viewed this item also vieved

MILLING DRILL 5/8" X 11/32" SHANK X 3/8 FLAT X 7" LONG DRILL BIT HIGH SPEED

MILLING DRILL 5/8" X 11/32" SHANK X 3/8 FLAT X 7" LONG DRILL BIT HIGH SPEED

  • East Bethany, New York, United States
  • Jun 4th
TWIST DRILL 13/16" X 13/16" SHANK X 5.5" LONG DRILL BIT HIGH SPEED

TWIST DRILL 13/16" X 13/16" SHANK X 5.5" LONG DRILL BIT HIGH SPEED

  • East Bethany, New York, United States
  • Jun 4th
TWIST DRILL 11/16" X 11/16" SHANK X 7.75" LONG DRILL BIT HIGH SPEED

TWIST DRILL 11/16" X 11/16" SHANK X 7.75" LONG DRILL BIT HIGH SPEED

  • East Bethany, New York, United States
  • Jun 4th
Hertel 17/32" COB Tialn Screw Machine Drills HD HMS40083J

Hertel 17/32" COB Tialn Screw Machine Drills HD HMS40083J

  • Venice, Florida, United States
  • Jun 7th
CLE-LINE, screw machine length, Drill Bits, 9/64, 4 pcs, New

CLE-LINE, screw machine length, Drill Bits, 9/64, 4 pcs, New

  • Maryland Heights, Missouri, United States
  • Jun 7th
25/32" PRECISION TWIST DRILL Screw Machine Length HSS R40

25/32" PRECISION TWIST DRILL Screw Machine Length HSS R40

  • Saint Peters, Missouri, United States
  • Jun 7th
Lot 2 High Speed Steel Taper Shank 13/64 Drill Bit HSS Lathe PRECISION Twist New

Lot 2 High Speed Steel Taper Shank 13/64 Drill Bit HSS Lathe PRECISION Twist New

  • Oxnard, California, United States
  • Jun 7th
High Speed Steel Taper Shank 11/32 Drill Bit HSS Lathe PRECISION Twist Brand New

High Speed Steel Taper Shank 11/32 Drill Bit HSS Lathe PRECISION Twist Brand New

  • Oxnard, California, United States
  • Jun 7th
High Speed Steel Taper Shank 45/64 Drill Bit HSS Lathe PRECISION Twist Brand New

High Speed Steel Taper Shank 45/64 Drill Bit HSS Lathe PRECISION Twist Brand New

  • Oxnard, California, United States
  • Jun 7th
LMT Onsrud 65-018 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch,

LMT Onsrud 65-018 Solid Carbide Upcut Spiral O Flute Cutting Tool, Inch,

  • USA, United States
  • Jun 8th
LMT Onsrud 62-727 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch,

LMT Onsrud 62-727 Solid Carbide Downcut Spiral O Flute Cutting Tool, Inch,

  • USA, United States
  • Jun 8th
LMT Onsrud 60-242 Solid Carbide Downcut Low Helix Finisher Cutting Tool, Inch,

LMT Onsrud 60-242 Solid Carbide Downcut Low Helix Finisher Cutting Tool, Inch,

  • USA, United States
  • Jun 8th
PTD Drill bits, 3 mm, High Quality M-7 steel, Lot of 5, new

PTD Drill bits, 3 mm, High Quality M-7 steel, Lot of 5, new

  • Maryland Heights, Missouri, United States
  • Jun 9th
Precision Twist , PTD, Drill bit, 57/64", HSS, Qty 1, lightly used, sharp

Precision Twist , PTD, Drill bit, 57/64", HSS, Qty 1, lightly used, sharp

  • Maryland Heights, Missouri, United States
  • Jun 9th
Drill bits, 27/64, reduced 1/4" shank, Lot of 3, New and Sharp

Drill bits, 27/64, reduced 1/4" shank, Lot of 3, New and Sharp

  • Maryland Heights, Missouri, United States
  • Jun 9th
Drill 7/8" HSS Oxide 255456-ST USA <480>

Drill 7/8" HSS Oxide 255456-ST USA <480>

  • Saint Louis, Missouri, United States
  • Jun 9th
TITEX PLUS Spiralbohrer Drills 1.80mm x 3.0mm Cobalt 757106 Qty 10 [590]

TITEX PLUS Spiralbohrer Drills 1.80mm x 3.0mm Cobalt 757106 Qty 10 [590]

  • Saint Louis, Missouri, United States
  • Jun 9th
Drill 57/64&#034; HSS Oxide 255457-ST USA &lt;480&gt;

Drill 57/64" HSS Oxide 255457-ST USA <480>

  • Saint Louis, Missouri, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies