Schneider Electric Variable Frequency Drive - Altivar 212 ATV212HU30M3X 3kW/3HP, US $309.99 – Picture 0

Schneider Electric Variable Frequency Drive - Altivar 212 ATV212HU30M3X 3kW/3HP, US $309.99 – Picture 1

Schneider Electric Variable Frequency Drive - Altivar 212 ATV212HU30M3X 3kW/3HP, US $309.99 – Picture 2

Schneider Electric Variable Frequency Drive - Altivar 212 ATV212HU30M3X 3kW/3HP, US $309.99 – Picture 3

Schneider Electric Variable Frequency Drive - Altivar 212 ATV212HU30M3X 3kW/3HP, US $309.99 – Picture 4

Schneider Electric Variable Frequency Drive - Altivar 212 ATV212HU30M3X 3kW/3HP, US $309.99 – Picture 5

Schneider Electric Variable Frequency Drive - Altivar 212 ATV212HU30M3X 3kW/3HP, US $309.99 – Picture 6

Schneider Electric Variable Frequency Drive - Altivar 212 ATV212HU30M3X 3kW/3HP, US $309.99 – Picture 7

Schneider Electric Variable Frequency Drive - Altivar 212 Atv212hu30m3x 3kw/3hp

US $309.99

Cary, North Carolina, United States
Jan 29th

Open on mobile:
QR code

Schneider Electric Variable Frequency Drive - Altivar 212 ATV212HU30M3X 3kW/3HP This product is new without packaging or documentation, the documentation is available from the manufacturers web site. This unit was purchased for a for a project that was never started, it has been powered on, tested and reset to factory defaults. Specs are from manufacturers web site: Main Range of product Altivar 212 Product or component type Variable speed drive Device short name ATV212 Product destination Asynchronous motors Product specific application Pumps and fans in HVAC Assembly style With heat sink Network number of phases 3 phases Motor power kW 3 kW Power supply voltage 200...240 V (- 15...10 %) Power supply voltage limits 170...264 V Supply frequency 50...60 Hz (- 5...5 %) Network frequency 47.5...63 Hz EMC filter Without EMC filter Line current 11.9 A for 200 V 10 A for 240 V Complementary Apparent power 5.2 kVA for 240 V Prospective line Isc 5 kA Continuous output current 13.7 A at 230 V Maximum transient current 15.1 A for 60 s Speed drive output frequency 0.5...200 Hz Nominal switching frequency 12 kHz Switching frequency 12...16 kHz with derating factor 6...16 kHz adjustable Speed range 1...10 Speed accuracy +/- 10 % of nominal slip for 0.2 Tn to Tn torque variation Torque accuracy +/- 15 % Transient overtorque 120 % of nominal motor torque, +/- 10 % for 60 s Asynchronous motor control profile Voltage/frequency ratio, 2 points Voltage/frequency ratio, 5 points Flux vector control without sensor, standard Voltage/frequency ratio - Energy Saving, quadratic U/f Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo) Regulation loop Adjustable PI regulator Motor slip compensation Adjustable Automatic whatever the load Not available in voltage/frequency ratio motor control Local signalling 1 LED - red - DC bus energized Output voltage <= power supply voltage Isolation Electrical between power and control Type of cable for external connection UL 508 cable with UL Type 1 kit: 3 wire(s) - 40 °C, copper 75 °C / PVC IEC cable without mounting kit: 1 wire(s) - 45 °C, copper 70 °C / PVC IEC cable without mounting kit: 1 wire(s) - 45 °C, copper 90 °C / XLPE/EPR Electrical connection Terminal 6 mm? / AWG 10 (L1/R, L2/S, L3/T) Terminal 2.5 mm? / AWG 14 (VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES) Tightening torque 1.3 N.m - 11.5 lb.in (L1/R, L2/S, L3/T) 0.6 N.m (VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES) Supply Internal supply: 24 V (21...27 V) DC - <= 200 A with overload and short-circuit protection Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC, +/- 5 % - <= 10 A with overload and short-circuit protection Analogue input number 2 Analogue input type Configurable voltage: (VIB) 0...10 V DC - 24 V max - 30000 Ohm - resolution: 10 bits Switch-configurable current: (VIA) 0...20 mA - 250 Ohm - resolution: 10 bits Switch-configurable voltage: (VIA) 0...10 V DC - 24 V max - 30000 Ohm - resolution: 10 bits Configurable PTC probe: (VIB) 0...6 probes - 1500 Ohm Sampling duration 22 ms +/- 0.5 ms (VIB) - analog input(s) 3.5 ms +/- 0.5 ms (VIA) - analog input(s) 2 ms +/- 0.5 ms (RES) - discrete input(s) 2 ms +/- 0.5 ms (R) - discrete input(s) 2 ms +/- 0.5 ms (F) - discrete input(s) Response time 7 ms +/- 0.5 ms (RY, RC) - discrete output(s) 7 ms +/- 0.5 ms (FLB, FLC) - discrete output(s) 7 ms +/- 0.5 ms (FLA, FLC) - discrete output(s) 2 ms +/- 0.5 ms (FM) - analog output(s) Accuracy +/- 1 % (FM) for a temperature variation 60 °C +/- 0.6 % (VIB) for a temperature variation 60 °C +/- 0.6 % (VIA) for a temperature variation 60 °C Linearity error +/- 0.2 % for output (FM) +/- 0.15 % of maximum value for input (VIB) +/- 0.15 % of maximum value for input (VIA) Analogue output number 1 Analogue output type Switch-configurable current: (FM) 0...20 mA - 970 Ohm - resolution: 10 bits Switch-configurable voltage: (FM) 0...10 V DC - 7620 Ohm - resolution: 10 bits Discrete output number 2 Discrete output type Configurable relay logic: (RY, RC) NO - 100000 cycles Configurable relay logic: (FLB, FLC) NC - 100000 cycles Configurable relay logic: (FLA, FLC) NO - 100000 cycles Minimum switching current 3 mA at 24 V DC (configurable relay logic) Maximum switching current 2 A at 30 V DC on inductive load - cos phi = 0.4 - L/R = 7 ms (FL, R) 2 A at 250 V AC on inductive load - cos phi = 0.4 - L/R = 7 ms (FL, R) 5 A at 30 V DC on resistive load - cos phi = 1 - L/R = 0 ms (FL, R) 5 A at 250 V AC on resistive load - cos phi = 1 - L/R = 0 ms (FL, R) Discrete input type Programmable (RES) 24 V DC, with level 1 PLC - 4700 Ohm Programmable (R) 24 V DC, with level 1 PLC - 4700 Ohm Programmable (F) 24 V DC, with level 1 PLC - 4700 Ohm Discrete input logic Negative logic (sink) (F, R, RES), >= 16 V (state 0), <= 10 V (state 1) Positive logic (source) (F, R, RES), <= 5 V (state 0), >= 11 V (state 1) Acceleration and deceleration ramps Automatic based on the load Linear adjustable separately from 0.01 to 3200 s Braking to standstill By DC injection Protection type With PTC probes for motor Motor phase break for motor Thermal protection for motor Against input phase loss for drive Line supply undervoltage for drive Line supply overvoltage and undervoltage for drive Against exceeding limit speed for drive Break on the control circuit for drive Overvoltages on the DC bus for drive Overcurrent between output phases and earth for drive Input phase breaks for drive Short-circuit between motor phases for drive Thermal power stage for drive Overheating protection for drive Dielectric strength 4230 V DC between control and power terminals 2830 V DC between earth and power terminals Insulation resistance >= 1 MOhm at 500 V DC for 1 minute Frequency resolution 0.024/50 Hz for analog input 0.1 Hz for display unit Communication port protocol APOGEE FLN BACnet LonWorks METASYS N2 Modbus Connector type 1 RJ45 1 open style Physical interface 2-wire RS 485 Transmission frame RTU Transmission rate 9600 bps or 19200 bps Data format 8 bits, 1 stop, odd even or no configurable parity Type of polarization No impedance Number of addresses 1...247 Communication service Monitoring inhibitable Read device identification (43) Read holding registers (03) 2 words maximum Time out setting from 0.1 to 100 s Write multiple registers (16) 2 words maximum Write single register (06) Option card Communication card for LonWorks Operating position Vertical +/- 10 degree Width 142 mm Height 184 mm Depth 150 mm Product weight 3.05 kg Power dissipation in W 146 W Fan flow rate 50 m3/h Environment Electromagnetic compatibility Voltage dips and interruptions immunity test conforming to IEC 61000-4-11 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Pollution degree 3 IEC 61800-5-1 IP degree of protection IP20 on upper part without blanking plate on cover conforming to EN/IEC 60529 IP20 on upper part without blanking plate on cover conforming to EN/IEC 61800-5-1 IP41 on upper part conforming to EN/IEC 60529 IP41 on upper part conforming to EN/IEC 61800-5-1 IP21 conforming to EN/IEC 60529 IP21 conforming to EN/IEC 61800-5-1 Vibration resistance 1 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-8 1.5 mm (f = 3...13 Hz) conforming to EN/IEC 60068-2-6 Shock resistance 15 gn for 11 ms conforming to IEC 60068-2-27 Environmental characteristic Classes 3S2 conforming to IEC 60721-3-3 Classes 3C1 conforming to IEC 60721-3-3 Noise level 51 dB conforming to 86/188/EEC Operating altitude 1000...3000 m (limited to 2000 m for the Corner Grounded distribution network) with current derating 1 % per 100 m <= 1000 m without derating Relative humidity 5...95 % without dripping water conforming to IEC 60068-2-3 5...95 % without condensation conforming to IEC 60068-2-3 Ambient air temperature for operation > 40...50 °C with derating factor -10...40 °C without derating Ambient air temperature for storage -25...70 °C Standards EN 61800-3 EN 61800-3 environments 1 category C1 EN 61800-3 environments 1 category C2 EN 61800-3 environments 1 category C3 EN 61800-3 environments 2 category C1 EN 61800-3 environments 2 category C2 EN 61800-3 environments 2 category C3 EN 61800-5-1 IEC 61800-3 IEC 61800-3 environments 1 category C1 IEC 61800-3 environments 1 category C2 IEC 61800-3 environments 1 category C3 IEC 61800-3 environments 2 category C1 IEC 61800-3 environments 2 category C2 IEC 61800-3 environments 2 category C3 IEC 61800-5-1 UL Type 1 Product certifications CSA C-Tick NOM 117 UL Marking CE Please feel free to contact me with any questions

Condition:	New other (see details): A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections. ...	Brand	Schneider Electric
Country/Region of Manufacture	Indonesia
Model	ATV212HU30M3X