+ Post new Ad
Scrap Carbide Drills.....18 Pounds of Resharpened & Dull Solid Carbide Drills, US $235.00 – Picture 0
Scrap Carbide Drills.....18 Pounds of Resharpened & Dull Solid Carbide Drills, US $235.00 – Picture 0

Scrap Carbide Drills.....18 Pounds Of Resharpened & Dull Solid Carbide Drills

US $235.00

  • Cincinnati, Ohio, United States
  • Aug 17th
Open on mobile:
QR code
18 Pounds of Scrap Carbide Drills......Resharpened & Semi-Dull Solid Carbide Drills.......Drills are Protected by Peel Coat on Cutting Ends ......Drills Came from General Electric Aircraft Division in Early 1990's......The Carbide Drills  are Quality Grade of Carbide.......Sold Some of These Carbide Drills Over The Years (as Pictured) to Machine Shops for $5.00 to $10.00 each.......Any Machine Job Shop Would Benefit from Having These Drills on Hand........They will Drill Hardened Steel & Inconel..........Looks like Sizes from .187 to .406.......But I'm Selling as SCRAP CARBIDE Powered by eBay Turbo Lister
“Scrap Carbide Drills.....Resharpened & Semi-Dull Solid Carbide Drills”
Country/Region of Manufacture United States
MPN Does Not Apply
Item Type Solid Carbide Drills
Brand Solid Carbide Drills
UPC Does not apply

Directions

Similar products from Other Drilling Tools

YG-1 DRILL C`Sink, Solid Carbide 0.1865 x 0.3937 x 1.00 x 3.465 2 FL "LOT OF 15"

YG-1 DRILL C`Sink, Solid Carbide 0.1865 x 0.3937 x 1.00 x 3.465 2 FL "LOT OF 15"

  • Paramount, California, United States
  • Aug 18th
YG-1 DRILL C`Sink, Solid Carbide 0.1915 x 0.375 x 0.450 x 2.485 2FL "LOT OF 27"

YG-1 DRILL C`Sink, Solid Carbide 0.1915 x 0.375 x 0.450 x 2.485 2FL "LOT OF 27"

  • Paramount, California, United States
  • Aug 18th
Big Gator Tools STD1000DGNP Portable V-DrillGuide w/17 SAE Hole Sizes

Big Gator Tools STD1000DGNP Portable V-DrillGuide w/17 SAE Hole Sizes

  • Atlanta, Georgia, United States
  • Aug 18th
18194J Slugger Annular Cutter 1-7/16" DOC 4" 3/4" Weldon shank

18194J Slugger Annular Cutter 1-7/16" DOC 4" 3/4" Weldon shank

  • Sun City, Arizona, United States
  • Aug 18th
Walter 3.4mm 140° Point Spiral Fl Solid Carbide Taper Length Drill Bit 5093090

Walter 3.4mm 140° Point Spiral Fl Solid Carbide Taper Length Drill Bit 5093090

  • Venice, Florida, United States
  • Aug 18th
Precision Twist Drill 1 inch Bit 1/2 inch shank Cobalt New Made In USA

Precision Twist Drill 1 inch Bit 1/2 inch shank Cobalt New Made In USA

  • Bradenton, Florida, United States
  • Aug 18th
4 QTY Drillco SA-3 Double Cut Solid Carbide Burs 7A124ADC

4 QTY Drillco SA-3 Double Cut Solid Carbide Burs 7A124ADC

  • Athens, Georgia, United States
  • Aug 18th
KENNAMETAL DRILL BIT, 8 MM DIA., B271Z08000HPG, 5-5/8" FLUTE, 7-1/4" OAL

KENNAMETAL DRILL BIT, 8 MM DIA., B271Z08000HPG, 5-5/8" FLUTE, 7-1/4" OAL

  • Coffeyville, Kansas, United States
  • Aug 17th
Aircraft Tools (30) NOS 1/4-28 Threaded Drill Bits + (15) Step Bits NTB-9

Aircraft Tools (30) NOS 1/4-28 Threaded Drill Bits + (15) Step Bits NTB-9

  • McMinnville, Oregon, United States
  • Aug 17th
1 pc. 1/4 SOLID CARBIDE SPADE DRILL USA (loc S16)

1 pc. 1/4 SOLID CARBIDE SPADE DRILL USA (loc S16)

  • Carrollton, Texas, United States
  • Aug 17th
#50 (.0700") Carbide Jobber Length Drill 118° Notched Point Melin USA EDP# 17106

#50 (.0700") Carbide Jobber Length Drill 118° Notched Point Melin USA EDP# 17106

  • Seminole, Florida, United States
  • Aug 17th
#77 (.0180") Diameter Carbide Jobber Drill 118° Point Ultra-Tool® USA #51177

#77 (.0180") Diameter Carbide Jobber Drill 118° Point Ultra-Tool® USA #51177

  • Seminole, Florida, United States
  • Aug 17th
DRILL INDEX 45 DRILL BITS ATM AVILDSEN TOOLS & MACH INC. NEW YORK-CHICAGO

DRILL INDEX 45 DRILL BITS ATM AVILDSEN TOOLS & MACH INC. NEW YORK-CHICAGO

  • Puyallup, Washington, United States
  • Aug 17th
2 1/2 O.D. COOLANT THRU INDEXABLE INSERT DRILL 2" SHANK 2 FL 2.5 HOLDS SNMG

2 1/2 O.D. COOLANT THRU INDEXABLE INSERT DRILL 2" SHANK 2 FL 2.5 HOLDS SNMG

  • Dayton, Ohio, United States
  • Aug 17th
KENDEX METCUT 3" O.D. INDEXABLE INSERT DRILL 270-0300 2 1/2 SHANK 2 FL 3.0 SNMG

KENDEX METCUT 3" O.D. INDEXABLE INSERT DRILL 270-0300 2 1/2 SHANK 2 FL 3.0 SNMG

  • Dayton, Ohio, United States
  • Aug 17th
AMEC ABOUT 2 1/2 O.D. INDEXABLE SPADE DRILL 24050S-0051 MORSE TAPER #5 SHANK

AMEC ABOUT 2 1/2 O.D. INDEXABLE SPADE DRILL 24050S-0051 MORSE TAPER #5 SHANK

  • Dayton, Ohio, United States
  • Aug 17th
ABOUT 3 1/8 O.D. COOLANT INDEXABLE INSERT SPADE DRILL MORSE TAPER #5 SHANK MT5

ABOUT 3 1/8 O.D. COOLANT INDEXABLE INSERT SPADE DRILL MORSE TAPER #5 SHANK MT5

  • Dayton, Ohio, United States
  • Aug 17th
AMEC UP TO 5" O.D. INDEXABLE SPADE DRILL G-500-5MT-SR MORSE TAPER #5 SHANK MT5

AMEC UP TO 5" O.D. INDEXABLE SPADE DRILL G-500-5MT-SR MORSE TAPER #5 SHANK MT5

  • Dayton, Ohio, United States
  • Aug 17th
29 PC HS Cobalt Jobber Drill Bit Set 1/16 to 1/2 by 64s

29 PC HS Cobalt Jobber Drill Bit Set 1/16 to 1/2 by 64s

  • Blue Jay, California, United States
  • Aug 17th
Rapidkut 1-13/32" Silver & Deming Drill HSS Drill Bit Reduced Shank 118° USA

Rapidkut 1-13/32" Silver & Deming Drill HSS Drill Bit Reduced Shank 118° USA

  • Farmington, Michigan, United States
  • Aug 17th

People who viewed this item also vieved

CLEFORGE 1/2" COOLANT INDUCED TAPER SHANK DRILL BIT 3MT

CLEFORGE 1/2" COOLANT INDUCED TAPER SHANK DRILL BIT 3MT

  • Wadley, Alabama, United States
  • Jan 30th
CLEFORGE 5/8" COOLANT INDUCED TAPER SHANK DRILL BIT 3MT

CLEFORGE 5/8" COOLANT INDUCED TAPER SHANK DRILL BIT 3MT

  • Wadley, Alabama, United States
  • Jan 30th
USED ERICKSON TOOL SPADE DRILL 1.31"

USED ERICKSON TOOL SPADE DRILL 1.31"

  • Minneapolis, Minnesota, United States
  • Jan 30th
No 44, 6 in., W.G. Aircraft, EXT Drill, (Qty 12)

No 44, 6 in., W.G. Aircraft, EXT Drill, (Qty 12)

  • Hopkinsville, Kentucky, United States
  • Jan 30th
1/2" USA C/T Taper Length Drill

1/2" USA C/T Taper Length Drill

  • Hopkinsville, Kentucky, United States
  • Jan 30th
UB #4 Aircraft Extended Drills, (QTY 10)

UB #4 Aircraft Extended Drills, (QTY 10)

  • Hopkinsville, Kentucky, United States
  • Jan 30th
American Tool A91136 | Drill S&D | 9/16" | Made in USA

American Tool A91136 | Drill S&D | 9/16" | Made in USA

  • Belleville, New Jersey, United States
  • Jan 30th
American Tool A91156 | Drill S&D |7/8" | Made in USA

American Tool A91156 | Drill S&D |7/8" | Made in USA

  • Belleville, New Jersey, United States
  • Jan 30th
American Tool A91148 | Drill S&D | 3/4" | Made in USA

American Tool A91148 | Drill S&D | 3/4" | Made in USA

  • Belleville, New Jersey, United States
  • Jan 30th
10 PCS DRILLS D 2,3 mm for carbon and alloyed steels..

10 PCS DRILLS D 2,3 mm for carbon and alloyed steels..

  • Pavlograd, Dnepropetrovsk, Ukraine
  • Jan 30th
10 PCS DRILLS D 2,2 mm for carbon and alloyed steels..

10 PCS DRILLS D 2,2 mm for carbon and alloyed steels..

  • Pavlograd, Dnepropetrovsk, Ukraine
  • Jan 30th
10 PCS DRILLS D 2,1 mm for carbon and alloyed steels..

10 PCS DRILLS D 2,1 mm for carbon and alloyed steels..

  • Pavlograd, Dnepropetrovsk, Ukraine
  • Jan 30th
(5 pc)-5 mm Diameter 4 Flute Carbide End Mill, 16 mm LOC*LAST ONE*

(5 pc)-5 mm Diameter 4 Flute Carbide End Mill, 16 mm LOC*LAST ONE*

  • Grass Lake, Michigan, United States
  • Jan 30th
KYOCERA TYCOM CARBIDE DRILLS 1/16" .800" SERIES 2300 CB ROUTER-DP

KYOCERA TYCOM CARBIDE DRILLS 1/16" .800" SERIES 2300 CB ROUTER-DP

  • Apple Valley, California, United States
  • Jan 30th
(365) GUHRING ZL BOHRER SOBO. 25122A 042/162 102 11MM DZWS

(365) GUHRING ZL BOHRER SOBO. 25122A 042/162 102 11MM DZWS

  • Barrington, Illinois, United States
  • Jan 30th
12.5mm Metric HSS Taper Shank MTS Twist Drill 12.5 MM NEW - D3

12.5mm Metric HSS Taper Shank MTS Twist Drill 12.5 MM NEW - D3

  • Cleveland, Ohio, United States
  • Jan 30th
5X5 DRILL BIT EXTENSION SOCKET Morse Collis 20 3/4" HIGH SPEED LATHE MILL #56

5X5 DRILL BIT EXTENSION SOCKET Morse Collis 20 3/4" HIGH SPEED LATHE MILL #56

  • Tonawanda, New York, United States
  • Jan 30th
TAPER DRILL BIT 17 3/4" HIGH SPEED LATHE MILL Collis Extension Socket #55

TAPER DRILL BIT 17 3/4" HIGH SPEED LATHE MILL Collis Extension Socket #55

  • Tonawanda, New York, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies