Sensorswitch Nlight Push Button Wallpod Dimming, White Npodm D Iv Nib

US $50.00

Louisville, Kentucky, United States
Jan 30th

Open on mobile:

OVERVIEW The nPODM Series WallPods are nLight-enabled toggle and/or raise/lower switches that provide a user with local control of a lighting zone. These single gang decorator style devices have soft-click buttons and have a green LED indicator for each button. WallPods communicate with other nLight devices via a CAT-5e cable that connects to one of its two RJ-45 connectors. A basic low voltage WallPod can work with an nLight power pack or line voltage sensor to provide toggle switch operation. WallPods with the DX or D dimming options have the added ability to adjust the level of any nLight controlled dimmable lighting. nLIGHT OPERATION These devices are native nLight, meaning they have the ability to communicate over an nLight network. When daisy-chain wired, using CAT-5e cabling, with an nLight-enabled power pack and other WallPods and/or sensors, an independent nLight control zone is created. Once linked to a Gateway, directly or via a Bridge, the zone becomes capable of remote status monitoring and control via SensorView software. CONTROL MODES The default operation of a WallPod is to act as a standard toggle switch or dimmer. Additionally, WallPods can participate in several advanced control modes: MANUAL TO (TIMED) OVERRIDE ON This mode requires the occupant to manually turn on the lights. Once on, the lights will remain on for a user selected time period. MANUAL ON (SEMI-AUTOMATIC) This mode requires the occupant to manually turn on the lights. Once on, the lights will automatically turn off when a sensor’s time delay expires. MANUAL TO FULLY-AUTOMATIC In this mode, after the switch is initially pressed and the lights turn on, the zone reverts to Automatic On/Automatic Off behavior. PREDICTIVE OFF MODE In this mode, pressing the switch overrides the lights off and temporarily disables the occupancy detection in the sensor. After a short exit time delay, the occupancy detection reactivates and monitors for an additional grace period. If no occupancy is detected, the zone will revert to Automatic On operation. If occupancy is detected, the zone will remain in Permanent Off mode, requiring the switch to be pressed again in order to restore the sensor to Automatic On.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	sensorswitch
MPN	nPODM D IV
Model	Push button wall pod, dimming, white
Type	LV Dimming