+ Post new Ad
Servo Products High Precision Mini Drill Press Model 7000 (RPM 200-20,000), US $890.00 – Picture 0
Servo Products High Precision Mini Drill Press Model 7000 (RPM 200-20,000), US $890.00 – Picture 1
Servo Products High Precision Mini Drill Press Model 7000 (RPM 200-20,000), US $890.00 – Picture 2
Servo Products High Precision Mini Drill Press Model 7000 (RPM 200-20,000), US $890.00 – Picture 0
Servo Products High Precision Mini Drill Press Model 7000 (RPM 200-20,000), US $890.00 – Picture 1
Servo Products High Precision Mini Drill Press Model 7000 (RPM 200-20,000), US $890.00 – Picture 2

Servo Products High Precision Mini Drill Press Model 7000 (rpm 200-20,000)

US $890.00

  • San Jose, California, United States
  • Mar 3rd
Open on mobile:
QR code
Barely Used SERVO Products STANDARD MINI DRILL PRESS MODEL 7000-I (Inch). Have had it in our lab for micropart drilling but have never needed it.  Looking for a good home or new lab.  Runs beautifully and accurate.  Chuck and all other parts are in pristine condition. For laboratory, prototype and precision production work. Available in chuck and collet models, 12" or 19" column, and inch or metric calibration. Inch version Drill holes down to 0.002” / 0.05mm Dia. Spindle runout: 0.0002" / 0.005 mm TIR High accuracy down stop for drilling depth control (0.001” / 0.05mm per division) Variable speed spindle (200-20,000 RPM) Quill travel (stroke): 1.5” / 38.1mm Keyless Albrecht chuck versions for quick and easy drill change; standard 0-1/8" / 0-3 mm; optional 0-1/16" / 0-1.5 mm Graduated dial gauge for depth control (0.001” / 0.05mm per division) Wide selection of bases and accessories Drill capacity:to 1/16" in inconel to 1/8" in steel to 3/16" in aluminum (collet only) Electrical: 115 volts AC, 50/60 Hz, 2 amps
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Country/Region of Manufacture United States
Model 7000
Brand SERVO Products
MPN 7000-I

Directions

Similar products from Tools for Drilling & Tapping Equipment

JARVIS .25" - 20 H5 TAPS .25" SHANK 2.5" OAL QTY9 (LOC1117A) TS13

JARVIS .25" - 20 H5 TAPS .25" SHANK 2.5" OAL QTY9 (LOC1117A) TS13

  • Laingsburg, Michigan, United States
  • Mar 3rd
THREADWELL .5" 13 NC TAPS GH 3 HS .5" SHANK 10" OAL QTY1 (LOC1063B) TS13

THREADWELL .5" 13 NC TAPS GH 3 HS .5" SHANK 10" OAL QTY1 (LOC1063B) TS13

  • Laingsburg, Michigan, United States
  • Mar 3rd
VERMONT 3/4 10 NC TAPS GH 5 HSS QTY3 (LOC1193A) TS13

VERMONT 3/4 10 NC TAPS GH 5 HSS QTY3 (LOC1193A) TS13

  • Laingsburg, Michigan, United States
  • Mar 3rd
VERMONT 3/8" 18 NPTF HS G TAP DRYSEAL QTY1 (LOC1117A) TS13

VERMONT 3/8" 18 NPTF HS G TAP DRYSEAL QTY1 (LOC1117A) TS13

  • Laingsburg, Michigan, United States
  • Mar 3rd
VERMONT 5/8" 11 H5 TAP X 10 4F EXT TAP QTY1 (LOC1117A) TS13

VERMONT 5/8" 11 H5 TAP X 10 4F EXT TAP QTY1 (LOC1117A) TS13

  • Laingsburg, Michigan, United States
  • Mar 3rd
Nider Gear Head Drill, NI-64L, 8 Speeds, MT#1 Spindle 18" x 10" Table 12" Throat

Nider Gear Head Drill, NI-64L, 8 Speeds, MT#1 Spindle 18" x 10" Table 12" Throat

  • Hopkins, Minnesota, United States
  • Mar 3rd
(4) Gang Drill (2) Solberga Gear Head Drills SE1735, 23" x 79" Table, Coolant

(4) Gang Drill (2) Solberga Gear Head Drills SE1735, 23" x 79" Table, Coolant

  • Hopkins, Minnesota, United States
  • Mar 3rd
DELTA DRILL PRESS

DELTA DRILL PRESS

  • Hilton Head Island, South Carolina, United States
  • Mar 3rd
Recoil (HeliCoil Type) Tread Repair Kit Size M8-1.25 Part # 35080

Recoil (HeliCoil Type) Tread Repair Kit Size M8-1.25 Part # 35080

  • Nashville, Tennessee, United States
  • Mar 3rd
HELICOIL Thread Repair Kit (All 8) 5401-04, 5403-4, 5403-6, 5402-4, 5403-5 MORE

HELICOIL Thread Repair Kit (All 8) 5401-04, 5403-4, 5403-6, 5402-4, 5403-5 MORE

  • Nashville, Tennessee, United States
  • Mar 3rd
2 UNIVERSAL ACURA-FLEX MAX-FLOAT TAPPING CHUCKS w/ 3/4" SHANKS - #169

2 UNIVERSAL ACURA-FLEX MAX-FLOAT TAPPING CHUCKS w/ 3/4" SHANKS - #169

  • Covina, California, United States
  • Mar 3rd
Mueller B-1 Drilling/Tapping Machine

Mueller B-1 Drilling/Tapping Machine

  • Toms River, New Jersey, United States
  • Mar 3rd
2 MORSE TAPER x #6 JACOBS No. A0206 CHUCK drill lathe mill tool Chuck

2 MORSE TAPER x #6 JACOBS No. A0206 CHUCK drill lathe mill tool Chuck

  • Mountain View, Missouri, United States
  • Mar 3rd
STARRETT 91A T HANDLE TAP WRENCH

STARRETT 91A T HANDLE TAP WRENCH

  • Erie, Pennsylvania, United States
  • Mar 3rd
JACOBS BALL BEARING SUPER CHUCK 14N 3 JT 0 - 1/2 IN WITH CAT 40 (30345)

JACOBS BALL BEARING SUPER CHUCK 14N 3 JT 0 - 1/2 IN WITH CAT 40 (30345)

  • Cincinnati, Ohio, United States
  • Mar 3rd
Walton # 176 Tap Wrench, Driver. Lathe, Mill ,Drill Press Hand.

Walton # 176 Tap Wrench, Driver. Lathe, Mill ,Drill Press Hand.

  • Grantville, Kansas, United States
  • Mar 3rd
PCM floating tapping collet - for shank 0.168"

PCM floating tapping collet - for shank 0.168"

  • Oakville, Ontario, Canada
  • Mar 3rd
PCM floating tapping collet - for shank 2.2mm

PCM floating tapping collet - for shank 2.2mm

  • Oakville, Ontario, Canada
  • Mar 3rd
PCM floating tapping collet - for shank 5.6mm

PCM floating tapping collet - for shank 5.6mm

  • Oakville, Ontario, Canada
  • Mar 3rd
PCM floating tapping collet - for shank 4.5mm

PCM floating tapping collet - for shank 4.5mm

  • Oakville, Ontario, Canada
  • Mar 3rd

People who viewed this item also vieved

J&L MODEL 21S DIE HEAD W 1-1/2" SHANK JONES & LAMPSON

J&L MODEL 21S DIE HEAD W 1-1/2" SHANK JONES & LAMPSON

  • Ellington, New York, United States
  • Jan 30th
JONES & LAMSON MODEL 22S-23S THREADING DIE HEAD 1-3/4" SHANK

JONES & LAMSON MODEL 22S-23S THREADING DIE HEAD 1-3/4" SHANK

  • Ellington, New York, United States
  • Jan 30th
Acme die head chasers, 1DS, 1/4 x 16 Acme thread, set of 4, nice

Acme die head chasers, 1DS, 1/4 x 16 Acme thread, set of 4, nice

  • Portland, Oregon, United States
  • Jan 30th
100 Ton 11" Thrt Edwards 100 Ton Deluxe *Made in the USA* NEW IRONWORKER, Built-

100 Ton 11" Thrt Edwards 100 Ton Deluxe *Made in the USA* NEW IRONWORKER, Built-

  • Harrison, New Jersey, United States
  • Jan 30th
100 Ton 11" Thrt Edwards 100 Ton *Made in the USA* NEW IRONWORKER, Universal Ope

100 Ton 11" Thrt Edwards 100 Ton *Made in the USA* NEW IRONWORKER, Universal Ope

  • Harrison, New Jersey, United States
  • Jan 30th
0.25" Cap. 72" W Betenbender 6'-250 *Made in the USA* NEW SHEAR, 1/4" x 6' Low P

0.25" Cap. 72" W Betenbender 6'-250 *Made in the USA* NEW SHEAR, 1/4" x 6' Low P

  • Harrison, New Jersey, United States
  • Jan 30th
New 370A Air pencil grinding tool High speed 70000RPM and high precision 0.01mm

New 370A Air pencil grinding tool High speed 70000RPM and high precision 0.01mm

  • hongkong, Hong Kong
  • Jan 30th
3"(80mm)x1"(25mm thicks), 3 pieces of polishing and finishing wool felt wheel

3"(80mm)x1"(25mm thicks), 3 pieces of polishing and finishing wool felt wheel

  • Incheon, default, Korea, South
  • Jan 30th
10pcs Type E120 HSS RH (B20 on E Shaft) Deburring Blades Shaviv EDP #29058

10pcs Type E120 HSS RH (B20 on E Shaft) Deburring Blades Shaviv EDP #29058

  • Seminole, Florida, United States
  • Jan 30th
3M 88132 Hookit Disc Hand Pad , Hook and Loop, 5" Diameter, 1/4" Thick, Black

3M 88132 Hookit Disc Hand Pad , Hook and Loop, 5" Diameter, 1/4" Thick, Black

  • Richmond Hill, New York, United States
  • Jan 30th
3M 00048011331379 (TM) Trizact(TM) CF Cloth Belt 337DC, X Weight, Aluminum

3M 00048011331379 (TM) Trizact(TM) CF Cloth Belt 337DC, X Weight, Aluminum

  • Richmond Hill, New York, United States
  • Jan 30th
3M 85095 Hookit Disc Hand Pad , Hook and Loop, 5" Diameter, Yellow (Pack of 10)

3M 85095 Hookit Disc Hand Pad , Hook and Loop, 5" Diameter, Yellow (Pack of 10)

  • Richmond Hill, New York, United States
  • Jan 30th
Used Carboloy MSBNL-20-6 Industrial Size Lathe Tool Holder

Used Carboloy MSBNL-20-6 Industrial Size Lathe Tool Holder

  • Blue Ridge Summit, Pennsylvania, United States
  • Jan 30th
Used Carboloy MTGNR-20-5R Industrial Size Lathe Tool Holder w/Insert

Used Carboloy MTGNR-20-5R Industrial Size Lathe Tool Holder w/Insert

  • Blue Ridge Summit, Pennsylvania, United States
  • Jan 30th
Used Manchester Industrial Lathe Tool Holder 203-112

Used Manchester Industrial Lathe Tool Holder 203-112

  • Blue Ridge Summit, Pennsylvania, United States
  • Jan 30th
Sandvik Coromant 3-1/8" Indexable Insert Face Mill RA262.2-080M 1" Dia Pilot 3/8

Sandvik Coromant 3-1/8" Indexable Insert Face Mill RA262.2-080M 1" Dia Pilot 3/8

  • Flint, Michigan, United States
  • Jan 30th
ERICKSON NMTB 50 3/8" END MILL HOLDER STK 1462

ERICKSON NMTB 50 3/8" END MILL HOLDER STK 1462

  • Wadley, Alabama, United States
  • Jan 30th
NMTB40 1" END MILL HOLDER STK1169

NMTB40 1" END MILL HOLDER STK1169

  • Wadley, Alabama, United States
  • Jan 30th
Aircraft Rivet Flush Set, 1 1/4 ” Diameter Head, 3 1/2 ” OAL, .401 Shank, Used/Surplus.

Aircraft Rivet Flush Set, 1 1/4 ” Diameter Head, 3 1/2 ” OAL, .401 Shank, Used/Surplus.

  • Tucson, Arizona, United States
  • Jan 30th
Fellows Tilting Head Gear Shaper (Inv.15673)

Fellows Tilting Head Gear Shaper (Inv.15673)

  • Portland, Connecticut, United States
  • Jan 30th
Flagler High Speed Button Lock Machine

Flagler High Speed Button Lock Machine

  • Ronkonkoma, New York, United States
  • Jan 30th
System 3R EDM 70mm Macro Holder, With Mounting Plate

System 3R EDM 70mm Macro Holder, With Mounting Plate

  • Lake Zurich, Illinois, United States
  • Feb 16th
System 3R EDM 70mm Macro Holder

System 3R EDM 70mm Macro Holder

  • Lake Zurich, Illinois, United States
  • Feb 16th
System 3R EDM 606.1 Alignment Check Ruler

System 3R EDM 606.1 Alignment Check Ruler

  • Lake Zurich, Illinois, United States
  • Feb 16th
NEW TANNEWITZ JAW SET GUIDE R-84 R-84 A R84 R84A

NEW TANNEWITZ JAW SET GUIDE R-84 R-84 A R84 R84A

  • Clover, South Carolina, United States
  • Mar 3rd
9”x 12” Wells Horizontal Band Saw Machine Specs, Very Nice

9”x 12” Wells Horizontal Band Saw Machine Specs, Very Nice

  • Somerville, New Jersey, United States
  • Mar 4th
Doall vertical bandsaw

Doall vertical bandsaw

  • Cement City, Michigan, United States
  • Mar 4th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies