+ Post new Ad
SHARS Carbide Tipped Boring Bar 9 Piece Set -w- Wooden Stand, US $190 – Picture 0
SHARS Carbide Tipped Boring Bar 9 Piece Set -w- Wooden Stand, US $190 – Picture 0

Shars Carbide Tipped Boring Bar 9 Piece Set -w- Wooden Stand

US $190

  • Merchantville, New Jersey, United States
  • Jun 15th
Open on mobile:
QR code
SHARS 9 PC 3/8" SHANK C6 BORING BAR SET CARBIDE TIPPED Set Features: 9 Piece boring bar set features C-6 carbide for use in harder materials but also works great in aluminum and other soft metals All shanks are held to 0.0000-0.0005" from the nominal diameter , made of special heat treated alloy steel Min. Bore Range: 5/16" - 7/16" Bore Depth Range: 3/4" - 2-1/4" Overall Length: 2" - 3-1/2" Shank Diameter No. of Pieces Overall Length Bore Depth Min. Bore 3/8" 9 pcs 2" 3/4" 5/16" 2-3/8" 1-1/8" 5/16" 2-3/4" 1-1/2" 5/16" 2-3/16" 15/16" 3/8" 2-21/32" 1-13/32" 3/8" 3-1/8" 1-7/8" 3/8" 2-3/8" 1-1/8" 7/16" 3-15/16" 1-11/16" 7/16" 3-1/2" 2-1/4" 7/16"

Directions

Similar products from Drilling Heads & Tool Holders

Ultra-Dex C06M SCLCR2 Carbide Boring Bar to Hold a Positive CCMT 21.51

Ultra-Dex C06M SCLCR2 Carbide Boring Bar to Hold a Positive CCMT 21.51

  • Dayton, Ohio, United States
  • Jun 16th
Ultra-Dex C08R SCLCR2-312 Carbide Boring Bar to Hold a Positive CCMT 21.51

Ultra-Dex C08R SCLCR2-312 Carbide Boring Bar to Hold a Positive CCMT 21.51

  • Dayton, Ohio, United States
  • Jun 16th
Valenite ValGROOVE VG10125-30 Grooving Cut off Tool

Valenite ValGROOVE VG10125-30 Grooving Cut off Tool

  • Portsmouth, Virginia, United States
  • Jun 16th
Bowman Distribution/Barnes - E Series Multi Tool Set - Holder, Blades - NEW

Bowman Distribution/Barnes - E Series Multi Tool Set - Holder, Blades - NEW

  • Linden, New Jersey, United States
  • Jun 16th
Mitsubishi Materials S-FSCLPR-082.5-C Screw Clamp Dimple Boring Bar with 0.313"

Mitsubishi Materials S-FSCLPR-082.5-C Screw Clamp Dimple Boring Bar with 0.313"

  • USA, United States
  • Jun 16th
HHIP 1001-0080 MT2 Draw Bar Boring Shank 7/8" -20 Thread MT2 Taper of Shank

HHIP 1001-0080 MT2 Draw Bar Boring Shank 7/8" -20 Thread MT2 Taper of Shank

  • US, United States
  • Jun 16th
1 NEW PH HORN CARBIDE BORING BAR. BU111.0500.03 GROOVING BAR. GERMANY. {J99}

1 NEW PH HORN CARBIDE BORING BAR. BU111.0500.03 GROOVING BAR. GERMANY. {J99}

  • Kent, Washington, United States
  • Jun 15th
1/4" Carbide RH Boring Bar ,4" Overall - Ultra-Dex USA CCUD-250-4-5R-WTS

1/4" Carbide RH Boring Bar ,4" Overall - Ultra-Dex USA CCUD-250-4-5R-WTS

  • La Verne, California, United States
  • Jun 15th
Kennametal 3/4" D. x 10"L. Bore Bar A12S-SCLCL3 With 5 Inserts CCGT3251LF KC5025

Kennametal 3/4" D. x 10"L. Bore Bar A12S-SCLCL3 With 5 Inserts CCGT3251LF KC5025

  • La Verne, California, United States
  • Jun 15th
Romicron Boring Holder KR32SVS0B093M

Romicron Boring Holder KR32SVS0B093M

  • Grand Rapids, Michigan, United States
  • Jun 15th
NOS SECO LATHE BORING BAR S16-SDUCL-3 STK 5541

NOS SECO LATHE BORING BAR S16-SDUCL-3 STK 5541

  • Wadley, Alabama, United States
  • Jun 15th
NOS KENNAMETAL LATHE BORING BAR A10-STUNL2 STK 5542

NOS KENNAMETAL LATHE BORING BAR A10-STUNL2 STK 5542

  • Wadley, Alabama, United States
  • Jun 15th
NOS STELLRAM LATHE BORING BAR S1-MTFNL-163 STK 5543

NOS STELLRAM LATHE BORING BAR S1-MTFNL-163 STK 5543

  • Wadley, Alabama, United States
  • Jun 15th
Kennametal Lathe Turning Tool Holder WSK-1902. TP-32 Insert. 7" x 1"

Kennametal Lathe Turning Tool Holder WSK-1902. TP-32 Insert. 7" x 1"

  • Steamboat Springs, Colorado, United States
  • Jun 15th
NOS KENNAMETAL LATHE BORING BAR S10-STUNL2 STK 5545

NOS KENNAMETAL LATHE BORING BAR S10-STUNL2 STK 5545

  • Wadley, Alabama, United States
  • Jun 15th
Kennametal Lathe Turning Tool Holder KTAR ___. TP-32 Insert. 6" x 1"

Kennametal Lathe Turning Tool Holder KTAR ___. TP-32 Insert. 6" x 1"

  • Steamboat Springs, Colorado, United States
  • Jun 15th
Kennametal Lathe Turning Tool Holder KTAR 12. TN-3 Insert. 4 1/2" X 3/4"

Kennametal Lathe Turning Tool Holder KTAR 12. TN-3 Insert. 4 1/2" X 3/4"

  • Steamboat Springs, Colorado, United States
  • Jun 15th
NMTB 30 ,Taper 30 Bridgeport No1 boring head.

NMTB 30 ,Taper 30 Bridgeport No1 boring head.

  • Phoenix, Arizona, United States
  • Jun 15th
Wendt-Sonis Unimet HIM-PTP4 Lathe Turning Tool Holder TP-43 Insert. 7 3/4 x 3/4"

Wendt-Sonis Unimet HIM-PTP4 Lathe Turning Tool Holder TP-43 Insert. 7 3/4 x 3/4"

  • Steamboat Springs, Colorado, United States
  • Jun 15th
Carboloy TATR-64 Lathe Turning Tool Holder. 6" by 3/4" by 29/32"

Carboloy TATR-64 Lathe Turning Tool Holder. 6" by 3/4" by 29/32"

  • Steamboat Springs, Colorado, United States
  • Jun 15th

People who viewed this item also vieved

MT3 INSIDE TO MT2 OUTSIDE DRILL SLEEVE

MT3 INSIDE TO MT2 OUTSIDE DRILL SLEEVE

  • Chino, California, United States
  • Jan 30th
Jacobs Chuck Arbor 3M.T. 33J.T England

Jacobs Chuck Arbor 3M.T. 33J.T England

  • Tucson, Arizona, United States
  • Jan 30th
BT-40 Shell Mill Holder with 3" OD Shell Mill

BT-40 Shell Mill Holder with 3" OD Shell Mill

  • Blue Springs, Missouri, United States
  • Jan 30th
Big Kaiser / Big Plus BT 30 Tool Holder

Big Kaiser / Big Plus BT 30 Tool Holder

  • Suring, Wisconsin, United States
  • Jan 30th
BEARING SHAFT 4-3/4" LONG FOR MOUNTING PULLEYS OR GEARS-1/4" SHAFT-3/4" BEARING

BEARING SHAFT 4-3/4" LONG FOR MOUNTING PULLEYS OR GEARS-1/4" SHAFT-3/4" BEARING

  • United States
  • Jan 30th
Browning Split Taper Bushing HX 1/2" H X

Browning Split Taper Bushing HX 1/2" H X

  • United States
  • Jan 30th
PARLEC CAT50 TG100 COLLET CHUCK MORE LISTED CNC CAT 50 TG100 LOT C6820

PARLEC CAT50 TG100 COLLET CHUCK MORE LISTED CNC CAT 50 TG100 LOT C6820

  • Dayton, Ohio, United States
  • Jan 30th
MADE IN USA CAT50 1" DIA END MILL HOLDER GOOD CONDITION CAT 50 LOT C3003

MADE IN USA CAT50 1" DIA END MILL HOLDER GOOD CONDITION CAT 50 LOT C3003

  • Dayton, Ohio, United States
  • Jan 30th
jacobs chuck 0-3/8" no 2a

jacobs chuck 0-3/8" no 2a

  • Harlan, Indiana, United States
  • Jan 30th
Shockwave Hex Shank Drill Bit-1/8" HEX IMPACT BIT

Shockwave Hex Shank Drill Bit-1/8" HEX IMPACT BIT

  • Brooklyn, New York, United States
  • Jan 30th
5 PCS Sandvik RNMX 38 12 00-MR 2135

5 PCS Sandvik RNMX 38 12 00-MR 2135

  • ?????????????, Russian Federation
  • Jan 30th
VALENITE - MODCO - M1023771 TOOL HOLDER - ADJSTABLE INSERTS BORING

VALENITE - MODCO - M1023771 TOOL HOLDER - ADJSTABLE INSERTS BORING

  • McKee, Kentucky, United States
  • Jan 30th
SUNNEN K12 variety pack Honing Abrasives (36) A47, J63, J83,---value $127

SUNNEN K12 variety pack Honing Abrasives (36) A47, J63, J83,---value $127

  • Chatham, Ontario, Canada
  • Jan 30th
SUNNEN L3 variety pack Honing Abrasives (36) A63, J83, J95

SUNNEN L3 variety pack Honing Abrasives (36) A63, J83, J95

  • Chatham, Ontario, Canada
  • Jan 30th
Reed CS-40 Knurling Tool Wheels

Reed CS-40 Knurling Tool Wheels

  • DeKalb, Illinois, United States
  • Jan 30th
ER32 Collet 1/8 **NEW**

ER32 Collet 1/8 **NEW**

  • Elk Grove Village, Illinois, United States
  • Jan 30th
Devlieg Flashchange 30 Camlock #2MT Adapter

Devlieg Flashchange 30 Camlock #2MT Adapter

  • Wooster, Ohio, United States
  • Jan 30th
Devlieg Flashchange 30 Camlock 3/8" Endmill Holder

Devlieg Flashchange 30 Camlock 3/8" Endmill Holder

  • Wooster, Ohio, United States
  • Jan 30th
Alliant milling head for vertical miller (Inv. 31331)

Alliant milling head for vertical miller (Inv. 31331)

  • Portland, Connecticut, United States
  • Jan 30th
ER11 400w 12000RPM 48V Brushless Spindle Motor + PWM Speed Controller

ER11 400w 12000RPM 48V Brushless Spindle Motor + PWM Speed Controller

  • ShenZhen ,Guangdong, China
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies