+ Post new Ad
Sherline Tool Height Gage 3009, US $26.95 – Picture 0
Sherline Tool Height Gage 3009, US $26.95 – Picture 0

Sherline Tool Height Gage 3009

US $26.95

  • Santa Ana, California, United States
  • Jul 7th
Open on mobile:
QR code
Sherline Tool Height Gage 3009 Sherline's steel gage offers a simple way to assure the tip of your cutting tool is set to the centerline height of the lathe. The lower lip is for tools in the standard toolpost, while the upper lip is used with the riser toolpost. Just set the gage on lathe table and position it in front of the tool tip to check to check height. It is much quicker and easier than checking height against a center in the headstock or tailstock.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Type Height
Model 3009
Country/Region of Manufacture United States
MPN Does Not Apply
Brand Sherline
UPC Does not apply

Directions

Similar products from Multidetectors & Inspection Gauges

2 Pack Screw Thread Pitch Gauge Tool Pitch Cutting Gauge Caliper Gages Measuring

2 Pack Screw Thread Pitch Gauge Tool Pitch Cutting Gauge Caliper Gages Measuring

  • US, United States
  • Jul 8th
SPI Snap Gage/Gauge 14-298-4 NIB 1"-2"

SPI Snap Gage/Gauge 14-298-4 NIB 1"-2"

  • Paducah, Kentucky, United States
  • Jul 8th
Go & No Go Thread Plug Gage Set 80mm x 1.5mm - 6H

Go & No Go Thread Plug Gage Set 80mm x 1.5mm - 6H

  • Johnson City, New York, United States
  • Jul 8th
Fowler Full Steel X-Series Depth Gauge with Satin Chrome Finish 52-125-006-1 ...

Fowler Full Steel X-Series Depth Gauge with Satin Chrome Finish 52-125-006-1 ...

  • Miami, Florida, United States
  • Jul 8th
pi tape measure 48-60 inch

pi tape measure 48-60 inch

  • Delavan, Wisconsin, United States
  • Jul 8th
P.I.I Small Hole Gages .125 to .500 ID Machinist 4pcs w/Pouch Made In Japan

P.I.I Small Hole Gages .125 to .500 ID Machinist 4pcs w/Pouch Made In Japan

  • Pompano Beach, Florida, United States
  • Jul 8th
(3) STARRETT EDGE FINDERS 827A & 827MA

(3) STARRETT EDGE FINDERS 827A & 827MA

  • North Springfield, Vermont, United States
  • Jul 8th
Vermont Gage 302141030 M18.0-1.0 6H Go And No-Go Taperlock Gage FACTORY NEW!!

Vermont Gage 302141030 M18.0-1.0 6H Go And No-Go Taperlock Gage FACTORY NEW!!

  • Clayton, Wisconsin, United States
  • Jul 8th
Scarce ! Fujikogu Center Gauge, Japan. In Original Package..

Scarce ! Fujikogu Center Gauge, Japan. In Original Package..

  • Decatur, Arkansas, United States
  • Jul 7th
Elektro Physik Mikrotest Coating Thickness Tester 0.3 - 40 Mils

Elektro Physik Mikrotest Coating Thickness Tester 0.3 - 40 Mils

  • Lake Jackson, Texas, United States
  • Jul 7th
3”- 8 NPT L1 KC602 THREAD RING GAGE QUALITY THREAD CHECK INC.

3”- 8 NPT L1 KC602 THREAD RING GAGE QUALITY THREAD CHECK INC.

  • Lynchburg, Virginia, United States
  • Jul 7th
Mitutoyo replacement stylus set 7822 No.6124

Mitutoyo replacement stylus set 7822 No.6124

  • Japan, Japan
  • Jul 7th
hanson 30-06 no go 3/12

hanson 30-06 no go 3/12

  • Show Low, Arizona, United States
  • Jul 7th
VINTAGE STARRETT FILLET or RADIUS GAGE 272B WITH ORIGINAL BOX

VINTAGE STARRETT FILLET or RADIUS GAGE 272B WITH ORIGINAL BOX

  • Hilton, New York, United States
  • Jul 7th
(2) Browne & Sharpe Intrimik Inside Bore Gage Set, .275" to .425" x .0001", Case

(2) Browne & Sharpe Intrimik Inside Bore Gage Set, .275" to .425" x .0001", Case

  • Clinton Township, Michigan, United States
  • Jul 7th
Newage Rockwell C Scale - Portable Hardness Tester in case - VQ15

Newage Rockwell C Scale - Portable Hardness Tester in case - VQ15

  • Bloomfield, Connecticut, United States
  • Jul 7th
GF Gage Single End Plug Thread No Go Gage Thread 0-80 UNF # G160100 USA

GF Gage Single End Plug Thread No Go Gage Thread 0-80 UNF # G160100 USA

  • Venice, Florida, United States
  • Jul 7th
PT Pi Tape 48”-60” Outside Diameter Periphery Inspection Measure USED

PT Pi Tape 48”-60” Outside Diameter Periphery Inspection Measure USED

  • Huntington Beach, California, United States
  • Jul 7th
HHIP 4101-1011 55 Piece Pin Gage Set 0.21 mm - 1.29 mm - .005

HHIP 4101-1011 55 Piece Pin Gage Set 0.21 mm - 1.29 mm - .005

  • Miami, Florida, United States
  • Jul 7th
Sunnen CF-502 Gage Setting Fixture 0" - 2" Range

Sunnen CF-502 Gage Setting Fixture 0" - 2" Range

  • Huntington Beach, California, United States
  • Jul 7th

People who viewed this item also vieved

New pro 6" DIGITAL ELECTRONIC CALIPER FRACTIONAL LCD STAINLESS w/carry case

New pro 6" DIGITAL ELECTRONIC CALIPER FRACTIONAL LCD STAINLESS w/carry case

  • Rowland Heights, California, United States
  • Jan 30th
Mitutoyo CD-6" CSX Abolute Digital Caliper

Mitutoyo CD-6" CSX Abolute Digital Caliper

  • Louisville, Kentucky, United States
  • Jan 30th
CNC ENGRAVE VANGUARD 3000 CONTROLLER PRECISION JOB $$$

CNC ENGRAVE VANGUARD 3000 CONTROLLER PRECISION JOB $$$

  • Shiner, Texas, United States
  • Jan 30th
Renishaw TP20 CMM Probe Kit 2 In Box 2 Stylus Modules with 90 Day Warranty

Renishaw TP20 CMM Probe Kit 2 In Box 2 Stylus Modules with 90 Day Warranty

  • Minneapolis, Minnesota, United States
  • Jan 30th
Mitutoyo 81 Pcs Gauge Block Set 516-902 Grade 2 BE1-81-2

Mitutoyo 81 Pcs Gauge Block Set 516-902 Grade 2 BE1-81-2

  • Willoughby, Ohio, United States
  • Jan 30th
Mitutoyo 35pc Rectangular Gage Block Set

Mitutoyo 35pc Rectangular Gage Block Set

  • Sterling Heights, Michigan, United States
  • Jan 30th
Central Tools 3D101 0 To 1 In. Dial Indicator Set With Magnetic Base

Central Tools 3D101 0 To 1 In. Dial Indicator Set With Magnetic Base

  • United States
  • Jan 30th
Fred V. Fowler Co., Inc 72-522-101 Mag Base And Dial Indicator Set (72522101)

Fred V. Fowler Co., Inc 72-522-101 Mag Base And Dial Indicator Set (72522101)

  • United States
  • Jan 30th
LS Starrett 12" Upright Magnetic Base Post w/ End Screw

LS Starrett 12" Upright Magnetic Base Post w/ End Screw

  • Graham, Washington, United States
  • Jan 30th
BROWN & SHARPE 599-849 Magnetic Base & Indicator Set G6115286

BROWN & SHARPE 599-849 Magnetic Base & Indicator Set G6115286

  • Drummonds, Tennessee, United States
  • Jan 30th
Enco 606-04 Micrometer Depth Gauge

Enco 606-04 Micrometer Depth Gauge

  • Boaz, Alabama, United States
  • Jan 30th
Mitutoyo 1-2" Digital Blade Micrometer Resolution .00005"

Mitutoyo 1-2" Digital Blade Micrometer Resolution .00005"

  • Waynesville, Ohio, United States
  • Jan 30th
VINTAGE MICROMETER 0-1" WITH CASE MADE IN GERMANY HELIOS ???

VINTAGE MICROMETER 0-1" WITH CASE MADE IN GERMANY HELIOS ???

  • South Bend, Indiana, United States
  • Jan 30th
Vintage Brown & Sharpe 2" Toolmakers Divider #800

Vintage Brown & Sharpe 2" Toolmakers Divider #800

  • Campton, New Hampshire, United States
  • Jan 30th
PEC 4 Piece Combination Square Set U-37 Blade Length 24" Non-reversible

PEC 4 Piece Combination Square Set U-37 Blade Length 24" Non-reversible

  • Flushing, New York, United States
  • Jan 30th
Vintage NEW Pro Inclinometer Model 1100-2VM Made USA Protractor Measures Angles

Vintage NEW Pro Inclinometer Model 1100-2VM Made USA Protractor Measures Angles

  • Woodinville, Washington, United States
  • Jan 30th
NO. C636EM 6 IN. STARRETT SATIN CHROME RULE, ENGLISH AMD METRIC SCALES

NO. C636EM 6 IN. STARRETT SATIN CHROME RULE, ENGLISH AMD METRIC SCALES

  • Bonita, California, United States
  • Jan 30th
STARRETT NO 299 RULE CLAMP MACHINIST TOOL VINTAGE RARE LQQK!

STARRETT NO 299 RULE CLAMP MACHINIST TOOL VINTAGE RARE LQQK!

  • La Puente, California, United States
  • Jan 30th
Hardened Precision Steel Square Set 2

Hardened Precision Steel Square Set 2

  • Brooklyn, New York, United States
  • Jan 30th
Hardened Precision Steel Square Set 1

Hardened Precision Steel Square Set 1

  • Brooklyn, New York, United States
  • Jan 30th
Granite Surface Plate 26.5" x 17" x 3" w/ Barry STABL-LEVL Mount Qty x 4

Granite Surface Plate 26.5" x 17" x 3" w/ Barry STABL-LEVL Mount Qty x 4

  • Laguna Hills, California, United States
  • Jan 30th
Granite Block Cube INSPECTION SURFACE Statue Base Plate

Granite Block Cube INSPECTION SURFACE Statue Base Plate

  • Canoga Park, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies