+ Post new Ad
ShopSmith 3" x 24" Course Commercial Sanding Ceramic Belt P80 Grit Part # 12531, US $8.50 – Picture 0
ShopSmith 3" x 24" Course Commercial Sanding Ceramic Belt P80 Grit Part # 12531, US $8.50 – Picture 0

Shopsmith 3" X 24" Course Commercial Sanding Ceramic Belt P80 Grit Part # 12531

US $8.50

  • Madison, Georgia, United States
  • Aug 22nd
Open on mobile:
QR code
Shopsmith 3-in W x 24-in L 80-Grit Commercial Sanding Belt Sandpaper Shopsmith® ceramic sanding belts are made with a tough and aggressive ceramic grain which last longer than any other abrasive materials available. It cuts faster allowing for a cooler cut. The combination of the tough ceramic and the extreme duty poly-cotton backing make Shopsmith® ceramic sanding belts the best choice for hogging off stock, roughing out shapes, removing finish as well as leveling uneven boards. Bi-directional flush joint runs smoothly in both directions Best for wood leveling and stock removal Removes paint from siding, floors, decks, boats and lawn furniture The extreme duty poly-cotton cloth backing resists tearing and wear increasing the life of the sanding belt The ceramic grain runs cooler to reduce heat build-up during sanding Razor sharp ceramic grains cuts 4 times faster Ships within 24 hours
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Country/Region of Manufacture Korea, Republic of
MPN 12531
Belt Width 3 in
Abrasive Material Ceramic
Grade Coarse
Belt Length 24 in
Grit (ANSI) P80
Brand ShopSmith
UPC 082354125318

Directions

Similar products from Sanding Belts

3M 777F 24 Grit Cloth Sanding Belt 2" x 72" YF Backing (Pack of 14)

3M 777F 24 Grit Cloth Sanding Belt 2" x 72" YF Backing (Pack of 14)

  • Saint Louis, Missouri, United States
  • Aug 24th
Diablo MegaMouse Sandpaper Assortment (9 Pack) DCTDETVGPH10G

Diablo MegaMouse Sandpaper Assortment (9 Pack) DCTDETVGPH10G

  • Carbondale, Illinois, United States
  • Aug 23rd
3M Cubitron II File Belt 33443, 36+, 1/2 in x 18 in (12.7 mm x 457.2 mm) 10

3M Cubitron II File Belt 33443, 36+, 1/2 in x 18 in (12.7 mm x 457.2 mm) 10

  • Russellville, Arkansas, United States
  • Aug 23rd
Qty = 25: NORTON 78072727570 3/4"X20-1/2" P80-X Metalite Belt R283 Pg C-F

Qty = 25: NORTON 78072727570 3/4"X20-1/2" P80-X Metalite Belt R283 Pg C-F

  • Atchison, Kansas, United States
  • Aug 23rd
3x15 1/2Mesh HDWE Cloth, 15 Foot Black

3x15 1/2Mesh HDWE Cloth, 15 Foot Black

  • Miami, Florida, United States
  • Aug 23rd
Michigan Abrasives Resin X Cloth Jewel Brand 28 In X 101 In 60 Grit Loose Roll

Michigan Abrasives Resin X Cloth Jewel Brand 28 In X 101 In 60 Grit Loose Roll

  • Harrison Township, Michigan, United States
  • Aug 22nd
NORTON 66623333420 Sanding Belt,3in.Wx80in.L,AO,80G,PK4

NORTON 66623333420 Sanding Belt,3in.Wx80in.L,AO,80G,PK4

  • Minooka, Illinois, United States
  • Aug 22nd
Sanding Belts High Quality Resin Emery Cloth Moisture & Heat Resistant 1/2"x18"

Sanding Belts High Quality Resin Emery Cloth Moisture & Heat Resistant 1/2"x18"

  • Blaine, Washington, United States
  • Aug 22nd
3M part #69436, Cloth Belt 577F, 120 YF-weight, 1/2 in x 24in (full box of 200)

3M part #69436, Cloth Belt 577F, 120 YF-weight, 1/2 in x 24in (full box of 200)

  • Wallkill, New York, United States
  • Aug 22nd
ShopSmith 3" x 24" Ceramic Sanding Belt P36 Grit No. 12530 - Extreme Removal New

ShopSmith 3" x 24" Ceramic Sanding Belt P36 Grit No. 12530 - Extreme Removal New

  • Madison, Georgia, United States
  • Aug 22nd
3m ceramic sanding belts 4 x 72 80 grit (GR)

3m ceramic sanding belts 4 x 72 80 grit (GR)

  • San Diego, California, United States
  • Aug 21st
Slipfence SF2-GK100 Wood and Aluminum Fence Gate Kit 4 ft. x 6 ft.

Slipfence SF2-GK100 Wood and Aluminum Fence Gate Kit 4 ft. x 6 ft.

  • Henrico, Virginia, United States
  • Aug 21st
3m 4 x 72 sanding belts 80 grit (GS)

3m 4 x 72 sanding belts 80 grit (GS)

  • San Diego, California, United States
  • Aug 21st
norton sanding belts 4 x 60 (GT)

norton sanding belts 4 x 60 (GT)

  • San Diego, California, United States
  • Aug 21st
Qty 10 3M Scotch-Brite Surface Conditioning Belts 1/2" X 18" Very Fine Nonwoven

Qty 10 3M Scotch-Brite Surface Conditioning Belts 1/2" X 18" Very Fine Nonwoven

  • Green Bay, Wisconsin, United States
  • Aug 21st
Qty 10 3M Scotch-Brite Surface Conditioning Belts 1/2" X 18" Medium nonwoven

Qty 10 3M Scotch-Brite Surface Conditioning Belts 1/2" X 18" Medium nonwoven

  • Green Bay, Wisconsin, United States
  • Aug 21st
Walter Line-Mate III Drum Sander 6268C Used

Walter Line-Mate III Drum Sander 6268C Used

  • Swansea, South Carolina, United States
  • Aug 20th
Jet Tools - Ready-To-Cut Abrasive, 100 Grit (60-9100)

Jet Tools - Ready-To-Cut Abrasive, 100 Grit (60-9100)

  • Walnut, California, United States
  • Aug 20th
Sungold Abrasives 67881 Blue Zirconia Cloth 24 Grit Sanding Belts, 6 Pack, 2" X

Sungold Abrasives 67881 Blue Zirconia Cloth 24 Grit Sanding Belts, 6 Pack, 2" X

  • Kansas City, Missouri, United States
  • Aug 20th
3M 337DC Belts 4Inch x90 Inch Grage A65 QTY 16. 7100048818

3M 337DC Belts 4Inch x90 Inch Grage A65 QTY 16. 7100048818

  • Venice, Florida, United States
  • Aug 20th

People who viewed this item also vieved

Metabo 623503000 4-in X 2-3/4-in Stainless Steel Wire Wheel

Metabo 623503000 4-in X 2-3/4-in Stainless Steel Wire Wheel

  • Richmond Hill, New York, United States
  • Jan 30th
Metabo 623765000 4-in X 5/8-in 11 Carbon Knot Brush

Metabo 623765000 4-in X 5/8-in 11 Carbon Knot Brush

  • Richmond Hill, New York, United States
  • Jan 30th
Metabo 623805000 2-3/4-in X 5/8-in 11 Stainless Steel Knot Brush

Metabo 623805000 2-3/4-in X 5/8-in 11 Stainless Steel Knot Brush

  • Richmond Hill, New York, United States
  • Jan 30th
2 SKILCRAFT SCRATCH WIRE BRUSHES 5" ~NEW~

2 SKILCRAFT SCRATCH WIRE BRUSHES 5" ~NEW~

  • Halifax, Pennsylvania, United States
  • Jan 30th
Everett Industries 20"-22" Dry Abrasive Cutoff Machine

Everett Industries 20"-22" Dry Abrasive Cutoff Machine

  • Fresno, California, United States
  • Jan 30th
MERCER DOUBLE REINFORCED MASONRY CUT-OFF WHEEL 14" x 1/8" x 1" 10 CT.

MERCER DOUBLE REINFORCED MASONRY CUT-OFF WHEEL 14" x 1/8" x 1" 10 CT.

  • Van Nuys, California, United States
  • Jan 30th
MERCER DOUBLE REINFORCED MASONRY CUT-OFF WHEEL 14" x 1/8" (5/32") x 20 mm 10 CT.

MERCER DOUBLE REINFORCED MASONRY CUT-OFF WHEEL 14" x 1/8" (5/32") x 20 mm 10 CT.

  • Van Nuys, California, United States
  • Jan 30th
CUT-OFF WHEEL 4" x 1/4" x 5/8" 24 CT. GOOD FOR CUTTING ALL METALS!

CUT-OFF WHEEL 4" x 1/4" x 5/8" 24 CT. GOOD FOR CUTTING ALL METALS!

  • Van Nuys, California, United States
  • Jan 30th
Roll of 100 3M STIKIT DISC ROLL 763U 5" Sanding Discs, P100 Grit, 80944 New!!

Roll of 100 3M STIKIT DISC ROLL 763U 5" Sanding Discs, P100 Grit, 80944 New!!

  • Glendale, Arizona, United States
  • Jan 30th
Zirconia Abrasive Disc.

Zirconia Abrasive Disc.

  • Gulfport, Mississippi, United States
  • Jan 30th
22 Standard Abrasives E-Z Quick Change Resin Fiber Disk 60 7" 531205

22 Standard Abrasives E-Z Quick Change Resin Fiber Disk 60 7" 531205

  • Vancouver, Washington, United States
  • Jan 30th
Arc Abrasive 22-30451, 6" Abrasive Pads, 40 grit - 10 each

Arc Abrasive 22-30451, 6" Abrasive Pads, 40 grit - 10 each

  • Chillicothe, Missouri, United States
  • Jan 30th
VINTAGE 2" X 8" CONE - LOK SANDING WHEEL

VINTAGE 2" X 8" CONE - LOK SANDING WHEEL

  • Republic, Missouri, United States
  • Jan 30th
Norton Abrasive Roll - Model #66261109320

Norton Abrasive Roll - Model #66261109320

  • Feeding Hills, Massachusetts, United States
  • Jan 30th
HI LYFE Abrasives Grinding Wheels, 3" x 1" x 1/2" C80 silicon carbide (5-Wheels)

HI LYFE Abrasives Grinding Wheels, 3" x 1" x 1/2" C80 silicon carbide (5-Wheels)

  • Woodland Hills, California, United States
  • Jan 30th
Grinding Wheel 20 x 2 x 14 inches Tyrolit F034417 KIHN TSR-1141 Foundry

Grinding Wheel 20 x 2 x 14 inches Tyrolit F034417 KIHN TSR-1141 Foundry

  • Waukesha, Wisconsin, United States
  • Jan 30th
100x 160mm Steel Flat Oval Triangle Grinding Coining Needle File Set Craft Tools

100x 160mm Steel Flat Oval Triangle Grinding Coining Needle File Set Craft Tools

  • Shenzhen, China
  • Jan 30th
SOPKO 2-1/4" OD GRINDING WHEEL ADAPTOR MODEL 200 LH

SOPKO 2-1/4" OD GRINDING WHEEL ADAPTOR MODEL 200 LH

  • Stanhope, New Jersey, United States
  • Jan 30th
3M Imperial Wet/Dry Sandpaper 1000 grit

3M Imperial Wet/Dry Sandpaper 1000 grit

  • Hellertown, Pennsylvania, United States
  • Jan 30th
Mystery Grinding Stone Abrasive Metal Vintage Machine Sanding Hand Tool

Mystery Grinding Stone Abrasive Metal Vintage Machine Sanding Hand Tool

  • United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies