Siemens Fire Alarm Psc-12 Final Assy 500-033340 New / Sealed - Free Shipping

US $500.00

  • Concord, California, United States
  • Aug 7th
SIEMENS FIRE ALARM PSC-12  FINAL ASSY  500-033340  NEW / SEALED  - FREE SHIPPING The Model PSC-12 from Siemens Industry,  Inc.  is a high current power  supply that provides the system with primary regulated 24VDC.  It is rated at 12A and has a builtin charger  that is capable of charging up to 100AH batteries.  It also has a microprocessor-controlled transfer  circuit that allows the PSC12  to switch the system power  to stand-by batteries during loss or reduction of the  AC  power. The PSC-12 incorporates an 18A circuit breaker  on the battery input. It provides terminal tie points for system signals. The PSC-12 mounts at the back of the enclosure of the COM-1 and occupies one location on the studs in the backbox or  on the optional CAB-MP Mounting Plate. The PSC-12 has four  programmable relays. The relays  can be configured in the NCC  WAN to change state on Figure 1 PSC-12 12  Amp Power  Supply a global alarm,  a global trouble or  on a manual request (general output). Features The PSC-12  features are as follows: • Universal  AC  power  input 120VAC-240VAC  @60Hz / 50Hz • Off-line Switch Mode Power  Converter • Power Factor  Correction • Built-in Battery Charger • Total Output power  of 12A@24VDC • Two separate power  output terminals: one power  limited terminal with 4A max @ 24VDC capacity and one non-power  limited terminal with 12A max @ 24VDC capacity (total not to exceed 12A) • Both output terminals have  current measurement capability • Auto resettable current protection circuits for  overload and short circuit • Access to CC-5 System bus • Supplies 6.2VDC @ 2A (power  limited) to the system bus • Supplies 24VDC @ 2A (power  limited) to the system bus (subject to a 12A total current limit) • Communicates via HNET  protocol • Four programmable relays  with 2A rati
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Siemens
MPN PSC-12
Type Fire Alarms
Country/Region of Manufacture Unknown
Model PSC-12

Directions

Similar products from Fire Alarming Systems

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies