Siemens Nim-1w Mxl Lan Wan Network Interface Module Nib Fresh Stock

US $270

  • Jersey City, New Jersey, United States
  • Jun 9th
Model NIM-1W is a Siemens Industry, Inc. - Fire Safety full-width network interface module that communicates MXL system information to an on-board analog modem, Model NIM-1M, which is a daughter board that connects directly onto Model NIM-1W module. When Model NIM-1M is connected to Model NIM-1W, MXL system information can be transmitted over dedicated, twisted-pair telephone wires. Model NIM-1M can transmit MXL system(s) information on dedicated telephone wire (18-26 AWG), and / or a dedicatedlineconditionedfor19.2Kbaudrate,allowing for MXL communication distances to be extended. Models NIM-1W / NIM-1M communicates with other NIM-1W / NIM-1M, thus forming a long distance communication bridge that can interconnect a single MXL or local MXL network with a remote network and / or single MXL panel. Models NIM-1W / NIM-1M occupies one (1), full Model MOM-series card cage slot, and communicates directly with the MXL panel’s networking interface module (NIM-1R). Since Models NIM-1W / NIM-1M function as a communication bridge, each module is then transparent (takes no network addresses) to the overallsystemconfiguration. Hence,theMXL systems function as one, unified MXL network (X-NET). A maximum of two (2) communication bridges can be installed in a series (refer to Case Scenario #3). The FireFinder Network Command Center, a Global MKB, and / or a global RCC (Remote Command Center) can serve as the central control / monitoring point. The maximum amount of panel addresses (MXL, MXL-IQ, MXLV and NCC) allowed on a MXL network system is 64. Interactive programming between MXL panels is supported. Style 4 or Style 7 wiring is supported among the MXL system(s). The modem transmission line connected to Model NIM-1M is Style 4. Style 7 can be achieved by using two sets of Models NIM-1M / NIM-1W in both the local and the remote panel. Model NIM-1M is equipped with nine (9) status LEDs, which indicate the modem communication status. Temperature and Humidity Range Products are  UL 864 9th Edition listed for indoor dry locations within a temperature range of 120+/-3°F (49+/-2°C) to 32+/-3°F (0+/-2°C) and at a relative humidity of 93+/-2% at a temperature of 90+/-3°F (32+/2°C).

Directions

Similar products from Control Boards & Panels

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies