Silent Knight Ifp1000 Fire Alarm Panel Complete - New In Box

US $1,250.00

United States
Mar 29th

Open on mobile:
QR code

This is a new in the box IFP1000 complete fire alarm panel, including enclosure. The IFP-1000 has one built-in signaling line circuit (SLC) to which all detectors and modules are connected. Add up to seven additional SLCs to extend the capabilities of the panel, or hold them in reserve for facility additions. Six onboard FlexputTM circuits are individually configurable for auxiliary power, notification outputs, or conventional smoke detectors. That means less additional parts, and fewer items to learn. The IFP-1000 also provides built-in strobe synchronization for System Sensor, Wheelock and Gentex devices you pick, and with support for System Sensor® Intelligent Device Protocol (IDP) or Hochiki protocol detectors, modules, and accessory devices, the IFP-1000 is fully customizable for your unique application. Retrofits are Easier - and So Are Installs If you need to replace a fire alarm control panel in an existing facility, and think you’ll need to run all new wire, you’re wrong! The IFP-1000 requires no special wiring, so you can just remove the existing panel, and drop in the IFP-1000. It’s that easy! And, when installing a new system, this feature means big savings on the special wire that some other panels require. Either way, you’ll save time and money using Silent Knight! False Alarm Reduction Under normal operation conditions, detectors get dirty due to dust accumulation or contaminants from construction activity. This “drift” in the detector’s sensitivity can cause false alarms. The IFP-1000 provides advanced algorithms to keep track of how dirty each detector is, based on information collected from each device, and can make adjustments that maintain proper operation. This reduces false alarms and builds confidence in the alarm system. Ease of Maintenance The IFP-1000’s built-in digital communicator, coupled with the Silent Knight Software Suite (SKSS), provides access to the panel 24/7! Can’t get to the job site to check what’s going on? Call up the panel from your laptop and get up to the minute details about individual devices, and the system. You can even view event history, test details, and more. IFP1000 Features: • Built-in support for up to 127 Hochiki devices or 99 IDP detectors and 99 IDP modules, expandable to 1016 Hochiki devices or 792 IDP detectors and 792 IDP modules • Uses standard wire—no shielded or twisted pair required • Built-in UL listed digital communicator for remote reporting of system activity and system programming • Central station reporting by point or by zone • Supports Class B (Style 4) and Class A (Style 6 or Style 7) configuration for SLC, and SBUS • Distributed, intelligent power • Sensor sensitivity settings, day/night sensitivity setting and automatic drift compensation • Flexput™ I/O circuits configurable for auxiliary power, notification outputs, or conventional smoke detector inputs. Notification circuits can be configured as Class A (Style Z) or Class B (Style Y). 2- and 4-wire smoke detectors can be configured as Class A (Style D) or Class B (Style B) • Built-in annunciator with a backlit 80-character LCD display • RS-485 bus provides communication to system accessories • Built-in RS-232 and USB interface for programming • Upload or download programming, event history, or detector status onsite or from a remote location using a PC and 5650/5651 Silent Knight Software Suite (SKSS) • Improvements in SKSS delivers five times faster upload/downloads • Built-in Form C trouble relay rated at 2.5 amps at 27.4 VDC • Two built-in Form C programmable relays rated at 2.5 amps at 27.4 VDC • Individual addressable devices can be tested • SLC device locator can locate a single or multiple devices on a SLC loop • System automatically tests addressable devices Installation The IFP-1000/HV can be surface or flush mounted. Compatibility The IFP-1000/HV SLC supports multiple device types of the same protocol: • Hochiki • IDP You cannot mix Hochiki and IDP devices on a FACP. However, any combination of addressable devices of the same protocol can be used on the IFP-1000/HV. Specifications Physical Flush Mount Dimensions: 14.5”W x 24.75”H x 3.9”D (36.8 W x 62.9 H x 9.8 D cm) Overall Dimensions: 16.2”W x 26.4”H x 4.2”D (40.6 W x 67 H x 11.8 D cm) Weight: 28 lbs. (12.8 kg) Color: Red Environmental Operating Temperature: 32?F – 120?F (0?C – 49?C) Humidity: 10% – 93% non-condensing Electrical IFP-1000 Primary AC: 120 VRMS @ 50/60 Hz, 2.7A IFP-1000HV Primary AC: 240 VRMS @ 50/60 Hz, 1.4A Total Accessory Load: 6A @ 27.4 VDC power-limited Standby Current: 215 mA Alarm Current: 385 mA Battery Charging Capacity: 7 to 35 AH Battery Size: 18 AH max. allowed in control panel cabinet. Larger capacity batteries can be housed in RBB accessory cabinet. Flexput Circuits Six circuits that can be programmed individually as: Notification Circuits: 3A per circuit @ 27.4 VDC, power-limited Auxiliary Power Circuits: 3A per circuit @ 27.4 VDC, powerlimited Initiation Circuit: 100 mA per circuit @ 27.4 VDC, powerlimited Indicator Lights General Alarm (Red): Flashes when in alarm; solid when alarm silenced Supervisory (Yellow): Flashes when a supervisory condition exists; solid when supervisory silenced System Troubles (Yellow): Flashes when a trouble condition exists; solid when trouble silenced System Silenced (Yellow): On when an alarm, trouble or supervisory condition has been silenced but not yet cleared System Power (Green): Flashes for AC failure; solid when power systems are normal Telephone Requirements: FCC Part 15 & Part 68 approved Jack: RJ31X (two required)

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Silent Knight
MPN	IFP1000
Model	Farenhyt
Type	Fire Alarms