Silver Coated Electrically Conductive Adhesive Adhesive 2.5g Heat Cure Required

US $9.98

Warwick, Rhode Island, United States
Jan 29th

Open on mobile:
QR code

Technical Product Bulletin ELECTRICALLY CONDUCTIVE ONE PART LOW COST EPOXY For more information, call (888) 522-6742 we are available 24/7 PRODUCT DESCRIPTION: AA-DUCT CG2 is a single component epoxy, formulated with silver coated ceramic that results in lower material costs without adversely sacrificing the properties obtained with a pure silver formulation. This concept opens the door to a wide range of applications previously prohibited by the much higher cost of Conventional silver conductive. AA-DUCT CG2 Formulated with Silver coated ceramic power combined with organic binders and solvents to produce electrically conductive paths, films or patterns over non-conductive substrates. AA-DUCT CG2 formulation produces electrically conductive paths on a wide variety of surfaces including plastics, rubber, cloth, thermoplastic, paper, wood and many others. AA-DUCT CG2 designed for use in diversified applications as microwave EMI & RFI shielding, in the assembly or repair of printed circuit boards, waveguides, electronic modules, flat cable, static shielding, connections, and circuitry. PRODUCT PROPERTIES: Appearance Silver Coated ceramic %Silver coated ceramic 76 Cure Type Heat cure Benefits · High strength · Perfect bond · EMI & RFI shielding · Wave guides Substrates Excellent choice for the Integrated Circuits, aluminum, copper, magnesium, steel, bronze, nickel, kovar, ceramic, glass, phenolic and G-10 epoxy glass boards. Catalyst Anhydride UNCURED PROPERTIES: Viscosity @ 25 °C cps 6,800 Silver coated ceramic , % 65 to 75 Pot Life 6 months Shelf life 6 months CURED PROPERTIES: Sheet Resistivity <0.1 ?/sqcm Lap shear strength 2000 Lb/in2 (1400 N/cm2) Bulk Resistivity 3x10-5 ?/cm Adhesion Tensile Strength 1000 N/cm2 (1500 lb/in2) Thermal Conductivity 0.04J/(cm.s. °C) [0.01cal/(cm.s. °C)] Specific heat 0.30J/(g. °C) :[0.07 cal/g. °C] Coefficient of Thermal Expansion: 3x10-5 (m/m)/ °C Modulus of elasticity: 4x1010 Pa (6x105 lb/in2) Poisson’s Ratio 0.35 CURE SCHEDULE: 0.7 hours @ 200°C, 392°F 1.5 hours @ 180°C, 356°F 2.5 hours @ 160°C, 320°F GENERAL INFORMATION: This product contains organic solvent. The following precautions should be exercised: Use with adequate ventilation. Avoid prolonged contact with skin, if contact with skin occurs, wash area immediately with a soap and water avoid prolonged breathing of vapor. Dangerous if swallowed. Refer to MSDS for more details. HOW TO USE: AA-DUCT CG2 conductive silver coated is formulated for application by brushing, spraying, dipping, banding or stylus. Recommended thinners may be added for individual compositions, to replace solvent losses or to make slight adjustments. Only the recommended thinner should be used. In handling and using organic solvents, the safety precautions recommended by the solvent supplier should be observed. AVAILABILITY: This epoxy can be supplied in various different packages. For more information, call (888) 522-6742 we are available 24/7 Data Sheets: TDS | MSDS available upon request.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Atom Adhesives
MPN	CG2-2
Model	AA-DUCT CG2-2
Country/Region of Manufacture	United States