Simplex Control Panel Model Cp120240ssp By Arizona Controls

US $710

  • Tucson, Arizona, United States
  • Jun 9th
This is a newly manufactured control panel that controls 1 sump pump. It includes 2 each 20' mercury free float switches, a panel mounting kit, and spare terminal with neutral jumper should the customer want to use a 120vac pump. Acceptable voltages: 110/115/120/220/230/240 VAC 60hz. It is capable of running a pump up to 2hp in a 120vac configuration and 4hp in a 240vac configuration. Panel comes with a Motor Running Indicator(LED), Alarm Indicator (high sump level LED), 3 position HOA switch with the following functions: Hand (pump is forced on), Off (pump will not start), Auto (float switch 1 starts the pump as the sump level rises. It also has a 3 position switch for the alarm/test functions: Test (starts the pump, activates the buzzer, lights both indicators. Silence (silences the buzzer. Alarm light will stay on until the sump level normalizes). On (enables the 80 dB pulsing alarm buzzer). This item comes with a 12 month limited warranty. This item has no proprietary electronics and has been designed and built using relay logic which will give many years of trouble free service (if installed properly) in the harshest of environments.                                            SPECIFICATIONS Pump Circuit 120/240VAC Single Phase 60 hz 30 FLA Max Control Circuit Fuse 1A AGC 120VAC Power Fiberglass Panel Rated NEMA 4X IP65 Switches, LED Indicators, and Buzzer NEMA 4 IP65 LED Indicators rated at 3600 actuations per hour Contactors rated for 1,000,000 actuations @40 amps 2HP per pole Fuse holder rated at 30 FLA Max Dimensions 10" x 8" x 6"

Directions

Similar products from Pump Accessories & Spare Parts

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies