Sioux 1788LX, Sunnen VGS500 ball drive setup, Reamers, Pilots, etc, US $1,250.00 – Picture 0

Sioux 1788LX, Sunnen VGS500 ball drive setup, Reamers, Pilots, etc, US $1,250.00 – Picture 1

Sioux 1788LX, Sunnen VGS500 ball drive setup, Reamers, Pilots, etc, US $1,250.00 – Picture 2

Sioux 1788LX, Sunnen VGS500 ball drive setup, Reamers, Pilots, etc, US $1,250.00 – Picture 3

Sioux 1788LX, Sunnen VGS500 ball drive setup, Reamers, Pilots, etc, US $1,250.00 – Picture 4

Sioux 1788LX, Sunnen VGS500 ball drive setup, Reamers, Pilots, etc, US $1,250.00 – Picture 5

Sioux 1788LX, Sunnen VGS500 ball drive setup, Reamers, Pilots, etc, US $1,250.00 – Picture 6

Sioux 1788LX, Sunnen VGS500 ball drive setup, Reamers, Pilots, etc, US $1,250.00 – Picture 7

Sioux 1788LX, Sunnen VGS500 ball drive setup, Reamers, Pilots, etc, US $1,250.00 – Picture 8

Sioux 1788LX, Sunnen VGS500 ball drive setup, Reamers, Pilots, etc, US $1,250.00 – Picture 9

Sioux 1788LX, Sunnen VGS500 ball drive setup, Reamers, Pilots, etc, US $1,250.00 – Picture 10

Sioux 1788LX, Sunnen VGS500 ball drive setup, Reamers, Pilots, etc, US $1,250.00 – Picture 11

Sioux 1788lx, Sunnen Vgs500 Ball Drive Setup, Reamers, Pilots, Etc

US $1,250.00

Temecula, California, United States
Jan 30th

Open on mobile:
QR code

Please read the entire description before bidding. I am selling off my engine rebuilder tooling and equipment, as I no longer am involved in the work. This is the first lot I have listed, and I have more lots to follow. Included are the following items, all are in normal working condition. The drivers operate properly under air power, the pilots are in good condition ( one .343 is beat up, some have wear), the reamers are in good condition ( there are a few chips on the flutes on a few, but do not limit function). All of the items have normal wear on them, a few of the reamers were only used once. If you have any questions about a specific item please ask and I will do my best to answer all questions. If you want dimensions for a specific item please ask and I will provide dimensions. These are just a few pics of the whole lot, I can provide more pics upon request. The Items included: Pilots K-Line 5432K 7/16 -.005 K-Line 5433K 7/16 -.004 K-Line 5375K 3/8 std K-Line 5370K 3/8 -.005 K-Line 5344C 11/32 std K-Line 5312K 5/16 std K-Line 5345K 9mm std K-Line 5357K 9mm +.003 Sioux 8.73mm T343 K-Line 5315K 8mm std K-Line 5275K 7mm +.001 K-Line 5343K 11/32 -.001 w/guide K-Line 5344C 11/32 std w/guide Sioux (unknown) mic at .3415 Air Drivers Sioux 1788LX all original Sioux 1792 Valve seat cutter Lisle 66000 Micrometer adjustment on each side 3 cutters 7 expanding pilots pilots min dia: 0.432 0.393 0.372 0.352 0.339 0.314 0.264 Reamers K-Line 4226 .562 K-Line 4224 .553 core drill w/ 3/8 pilot K-Line 4210 .492 core Drill w/ 5/16 pilot K-Line 4211 .492 core drill w/ 11/32 pilot KW 018-1064-00 .615 core drill w/.4365 pilot K-Line 4223 .553 core drill w/ .341 pilot K-Line 4212 .492 core drill w/ .370 pilot KW 018-1061-08 .429 core drill w/.3115 pilot K-Line 1122B .344 valve guide reamer K-Line 1121B .343 valve guide reamer Kwik Way 004-0002-26 5/8 reamer MISC Babco 821 5:1 speed reducer Cylinder Head level 2576S .385/.386 #3 MT ball drive KL4235 spot cutter w/.3365 .3655 pilot / 2 carbide cutters VST-20 valve guide seal cutter w/.338 pilot VST-17 valve guide seal cutter w/.338 pilot 11/32 pneumatic hammer valve guide driver K-Line KL1602RX 3/8 liner installation kit (complete) KL8550 Boring bushing kit

Condition:

Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...

Brand

Sunnen