+ Post new Ad
SKODA Precision Heavy Duty Live Center TAPER: 2 MT Center Point Angle: 60 Degree, US $260 – Picture 0
SKODA Precision Heavy Duty Live Center TAPER: 2 MT Center Point Angle: 60 Degree, US $260 – Picture 0

Skoda Precision Heavy Duty Live Center Taper: 2 Mt Center Point Angle: 60 Degree

US $260

  • Duncan, South Carolina, United States
  • Jun 5th
Open on mobile:
QR code
Create less thermal friction when turningFeatures The rotating spindle is extended right through the tapered shank. Two specially designed adjustable needle-roller bearings carry all radial loads. A heavy duty ball thrust bearing takes all axial thrust. Thermal expansion and shock loads are absorbed by a special compensator spring. Complete protection of bearings from the ingress of coolant dirt or swarf is provided by the built-in oil seal which also prevents loss of lubricant. Product Specifications Product Specifications Weight 1.40000 Brand SKODA Model # 310-110 Taper 2 MT Thrust Load — Weight Of Workpiece 600 lbs. Center Point Angle 60° Maximum Rotational Speed — Center Diameter 7/8" Spindle Diameter — Point Diameter — Point Type — Body Diameter 1-1/2" Largest Head Diameter — Head Diameter — Body Length 5" Comp Load Rate — Net Weight of Center 1.4 lbs. Length From Head To Tip of Point — Overall Length — Length From Gage Line To Tip — Morse Taper 2 Point Angle 60° Country of Origin CZECH REPUBLIC Powered by Solid Commerce, The All-in-One Listing, Inventory & Order Management Solution for Online Merchants

Directions

Similar products from Live Centers

TTC Revolving Tailstock Turret Die Holder for 5'' Turret

TTC Revolving Tailstock Turret Die Holder for 5'' Turret

  • Duncan, South Carolina, United States
  • Jun 5th
PHASE II Precision Heavy Duty Live Centers - Model : 310-203S TAPER: 3 MT

PHASE II Precision Heavy Duty Live Centers - Model : 310-203S TAPER: 3 MT

  • Duncan, South Carolina, United States
  • Jun 5th
TTC Medium Duty Live Center Set - Morse Taper: 4 MT

TTC Medium Duty Live Center Set - Morse Taper: 4 MT

  • Duncan, South Carolina, United States
  • Jun 5th
TTC Carbide Tipped Dead Center - TAPER: 4 MT

TTC Carbide Tipped Dead Center - TAPER: 4 MT

  • Duncan, South Carolina, United States
  • Jun 5th
BISON Bull Head Live Center - Overall Length : 7.09'' Taper: 4 MT

BISON Bull Head Live Center - Overall Length : 7.09'' Taper: 4 MT

  • Duncan, South Carolina, United States
  • Jun 5th
TTC Bull Nose Live Center - Overall Length : 6.50'' Taper: 3 MT

TTC Bull Nose Live Center - Overall Length : 6.50'' Taper: 3 MT

  • Duncan, South Carolina, United States
  • Jun 5th
TTC Revolving Tailstock Turret Reaming Chuck for 5'' Turret

TTC Revolving Tailstock Turret Reaming Chuck for 5'' Turret

  • Duncan, South Carolina, United States
  • Jun 5th
TTC HSS Dead Center - TAPER: 5 MT

TTC HSS Dead Center - TAPER: 5 MT

  • Duncan, South Carolina, United States
  • Jun 5th
BISON Bull Head Live Center - Overall Length : 5.83'' Taper: 3 MT

BISON Bull Head Live Center - Overall Length : 5.83'' Taper: 3 MT

  • Duncan, South Carolina, United States
  • Jun 5th
TTC Revolving Tailstock Turret Live Center for 5' Turret

TTC Revolving Tailstock Turret Live Center for 5' Turret

  • Duncan, South Carolina, United States
  • Jun 5th
BISON Bull Head Live Center - Overall Length : 8.15'' Taper: 5 MT

BISON Bull Head Live Center - Overall Length : 8.15'' Taper: 5 MT

  • Duncan, South Carolina, United States
  • Jun 5th
Cogsdill Strait Shank Dead Center CSF D 01 D (LOC2033D) TS6

Cogsdill Strait Shank Dead Center CSF D 01 D (LOC2033D) TS6

  • Laingsburg, Michigan, United States
  • Jun 5th
TTC Bull Nose Live Center - Overall Length : 7.62'' Taper: 4 MT

TTC Bull Nose Live Center - Overall Length : 7.62'' Taper: 4 MT

  • Duncan, South Carolina, United States
  • Jun 5th
TTC Bull Nose Live Center - Overall Length : 5.37'' Taper: 2 MT

TTC Bull Nose Live Center - Overall Length : 5.37'' Taper: 2 MT

  • Duncan, South Carolina, United States
  • Jun 5th
BISON Bull Head Live Center - Overall Length : 4.84'' Taper: 2 MT

BISON Bull Head Live Center - Overall Length : 4.84'' Taper: 2 MT

  • Duncan, South Carolina, United States
  • Jun 5th
Brown & Sharpe 50" Bench Center

Brown & Sharpe 50" Bench Center

  • Statesville, North Carolina, United States
  • Jun 5th
CENTER SQUARE (1-1/2" + 3") & ALUMINIUM SCRIBER (4") SET : COMBO KIT OF 3 Pcs.

CENTER SQUARE (1-1/2" + 3") & ALUMINIUM SCRIBER (4") SET : COMBO KIT OF 3 Pcs.

  • DELHI, DELHI, India
  • Jun 5th
Bruckner #5 Morse Taper Live Center

Bruckner #5 Morse Taper Live Center

  • Dayton, Ohio, United States
  • Jun 5th
MT1 & MT2 MORSE TAPER LIVE CENTER CARBIDE BEARING CNC

MT1 & MT2 MORSE TAPER LIVE CENTER CARBIDE BEARING CNC

  • Garden Grove, California, United States
  • Jun 5th
(3) NEW QUALITY CARBIDE DEAD CENTER MORSE TAPER #2 LATHE CENTER

(3) NEW QUALITY CARBIDE DEAD CENTER MORSE TAPER #2 LATHE CENTER

  • Fenton, Michigan, United States
  • Jun 5th

People who viewed this item also vieved

1-2-3 Setup Blocks, Matched Pair, 23 Holes (5 Tapped), .0001" Squareness (52C)

1-2-3 Setup Blocks, Matched Pair, 23 Holes (5 Tapped), .0001" Squareness (52C)

  • Saint Louis, Missouri, United States
  • Jan 30th
L.S.STARRETT #278 V-BLOCK SET W/CLAMPS ***SUPERB***!

L.S.STARRETT #278 V-BLOCK SET W/CLAMPS ***SUPERB***!

  • Highland, New York, United States
  • Jan 30th
V-Block, 6" x 6" x 6", 1-1/4 to 4-3/8" V Capacity, 90° V Angle

V-Block, 6" x 6" x 6", 1-1/4 to 4-3/8" V Capacity, 90° V Angle

  • Saint Louis, Missouri, United States
  • Jan 30th
BUCK CHUCK 12" 3-JAW STATIONARY POWER LATHE CHUCK No. 4012 W/ T-SLOT

BUCK CHUCK 12" 3-JAW STATIONARY POWER LATHE CHUCK No. 4012 W/ T-SLOT

  • Chino, California, United States
  • Jan 30th
KITAGAWA 10" 3-JAW POWER HYDRAULIC LATHE CHUCK No. HOS-10

KITAGAWA 10" 3-JAW POWER HYDRAULIC LATHE CHUCK No. HOS-10

  • Chino, California, United States
  • Jan 30th
SUBURBAN TOOL 6" x 18" Magnum Force Manual Magnetic Chuck PARTS / REPAIR

SUBURBAN TOOL 6" x 18" Magnum Force Manual Magnetic Chuck PARTS / REPAIR

  • Venice, Florida, United States
  • Jan 30th
Kant Twist Clamp 407 2-1/2" D Deep Throat Clamp, 2-7/16" Opening, USA Made New

Kant Twist Clamp 407 2-1/2" D Deep Throat Clamp, 2-7/16" Opening, USA Made New

  • Attleboro, Massachusetts, United States
  • Jan 30th
(2) Armstrong No. 4" Crane Bridge C-Clamp w/Lifting Ring FREE SHIPPING

(2) Armstrong No. 4" Crane Bridge C-Clamp w/Lifting Ring FREE SHIPPING

  • Cornell, Illinois, United States
  • Jan 30th
(2) Armstrong No. 6" Crane Bridge C-Clamp w/Lifting Ring FREE SHIPPING

(2) Armstrong No. 6" Crane Bridge C-Clamp w/Lifting Ring FREE SHIPPING

  • Cornell, Illinois, United States
  • Jan 30th
Full Set of 22 - Briney BR32 Tapping Collet - 3/32" to 3/4"

Full Set of 22 - Briney BR32 Tapping Collet - 3/32" to 3/4"

  • Winnipeg, Manitoba, Canada
  • Jan 30th
ATS PULL BACK COLLET CHUCK W/ ADAPTER A6-S22H

ATS PULL BACK COLLET CHUCK W/ ADAPTER A6-S22H

  • Buffalo, New York, United States
  • Jan 30th
Young Bros Stamp Works 5/16 inch Steel Set 9 Figure Number Character MADE IN USA

Young Bros Stamp Works 5/16 inch Steel Set 9 Figure Number Character MADE IN USA

  • Columbus, Ohio, United States
  • Jan 30th
HARDINGE -S25-HS COLLET 3/8 ROUND SMOOTH NEW

HARDINGE -S25-HS COLLET 3/8 ROUND SMOOTH NEW

  • Roscoe, Illinois, United States
  • Jan 30th
ENCO 3/16" ROUND COLLET TOOL HOLDER NEW

ENCO 3/16" ROUND COLLET TOOL HOLDER NEW

  • Rockford, Illinois, United States
  • Jan 30th
ER 16 10MM SPRING COLLET PARLEC MACHINIST TOOLING

ER 16 10MM SPRING COLLET PARLEC MACHINIST TOOLING

  • Punta Gorda, Florida, United States
  • Jan 30th
60" x 25" x 9" T-Slotted Table Cast Iron Steel Layout Welding _ A15016 _ A15017

60" x 25" x 9" T-Slotted Table Cast Iron Steel Layout Welding _ A15016 _ A15017

  • Grand Rapids, Michigan, United States
  • Jan 30th
5pc 5C HEX & SQUARE COLLET BLOCK SET & 17pc 5C COLLET SET 1/16-1" BY 16ths

5pc 5C HEX & SQUARE COLLET BLOCK SET & 17pc 5C COLLET SET 1/16-1" BY 16ths

  • Garden Grove, California, United States
  • Jan 30th
DME 10 x 12 Double Unit Holder Aluminum Die Casting With Machine And Die Clamps

DME 10 x 12 Double Unit Holder Aluminum Die Casting With Machine And Die Clamps

  • Plantsville, Connecticut, United States
  • Jan 30th
Enerpac, MFT71 A1910C

Enerpac, MFT71 A1910C

  • Glassboro, New Jersey, United States
  • Jan 30th
DADCO, CW03-332705003

DADCO, CW03-332705003

  • Glassboro, New Jersey, United States
  • Jan 30th
Roemheld, M02 254004

Roemheld, M02 254004

  • Glassboro, New Jersey, United States
  • Jan 30th
Tsugami Quick Acting Collet Holder

Tsugami Quick Acting Collet Holder

  • Portland, Connecticut, United States
  • Jan 30th
Bimba Index/Rotary Assembly # 247090-AICK

Bimba Index/Rotary Assembly # 247090-AICK

  • Wyoming, Michigan, United States
  • Jan 30th
Bullard 52+/- inch Fixture Table Aluminum

Bullard 52+/- inch Fixture Table Aluminum

  • Portland, Connecticut, United States
  • Jan 30th
Precision Screwless Vise Jaw Width 4" Jaw Depth 1 3/4" Jaw Opening 4 7/8

Precision Screwless Vise Jaw Width 4" Jaw Depth 1 3/4" Jaw Opening 4 7/8

  • Columbus, Ohio, United States
  • Jan 30th
JET Mechanics Vise - Model : 746 Jaw Width: 6"

JET Mechanics Vise - Model : 746 Jaw Width: 6"

  • Flushing, New York, United States
  • Jan 30th
Wilton Bullet Vise 6 Inch Wide Jaws (Inv.31528)

Wilton Bullet Vise 6 Inch Wide Jaws (Inv.31528)

  • Portland, Connecticut, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies