+ Post new Ad
SMITH TOOL CAT40 1/2" DIA ENDMILL HOLDER MORE LISTED CAT 40 END MILL LOT C11804, US $29.00 – Picture 0
SMITH TOOL CAT40 1/2" DIA ENDMILL HOLDER MORE LISTED CAT 40 END MILL LOT C11804, US $29.00 – Picture 1
SMITH TOOL CAT40 1/2" DIA ENDMILL HOLDER MORE LISTED CAT 40 END MILL LOT C11804, US $29.00 – Picture 2
SMITH TOOL CAT40 1/2" DIA ENDMILL HOLDER MORE LISTED CAT 40 END MILL LOT C11804, US $29.00 – Picture 0
SMITH TOOL CAT40 1/2" DIA ENDMILL HOLDER MORE LISTED CAT 40 END MILL LOT C11804, US $29.00 – Picture 1
SMITH TOOL CAT40 1/2" DIA ENDMILL HOLDER MORE LISTED CAT 40 END MILL LOT C11804, US $29.00 – Picture 2

Smith Tool Cat40 1/2" Dia Endmill Holder More Listed Cat 40 End Mill Lot C11804

US $29.00

  • Dayton, Ohio, United States
  • Mar 1st
Open on mobile:
QR code
LOT C11804 WE ARE OFFERING A SMITH TOOL CAT40  1/2" DIAMETER  ENDMILL HOLDER YOU WILL RECEIVE ITEM AS SHOWN IN PICTURES. ANY QUESTIONS CALL (937) 672-9876 OR (937) 320-2298 CLICK LINK BELOW TO Visit My eBay Store! CLICK LINK BELOW TO ADD US TO YOUR favorites list!
“YOU WILL RECEIVE THIS ITEM IN THE CONDITION AS SHOWN IN THE PICTURES”
Manufacturer SMITH TOOL
Model CAT40 ENDMILL HOLDER
Brand SMITH TOOL

Directions

Similar products from CT Tapers & Holders

KENNAMETAL CAT40 3/4" ENDMILL HOLDER CV40EM075375 CAT 40 END MILL LOT C11674

KENNAMETAL CAT40 3/4" ENDMILL HOLDER CV40EM075375 CAT 40 END MILL LOT C11674

  • Dayton, Ohio, United States
  • Mar 1st
VALENITE CAT40 3/4" ENDMILL HOLDER V40CT-E75 CAT 40 END MILL LOT C11663

VALENITE CAT40 3/4" ENDMILL HOLDER V40CT-E75 CAT 40 END MILL LOT C11663

  • Dayton, Ohio, United States
  • Mar 1st
VALENITE CAT40 3/4" ENDMILL HOLDER V40CT-E75 CAT 40 END MILL LOT C11675

VALENITE CAT40 3/4" ENDMILL HOLDER V40CT-E75 CAT 40 END MILL LOT C11675

  • Dayton, Ohio, United States
  • Mar 1st
PARLEC CAT40 3/4" ENDMILL HOLDER C40-75EM6 EXT. LENGTH CAT 40 END MILL C11661

PARLEC CAT40 3/4" ENDMILL HOLDER C40-75EM6 EXT. LENGTH CAT 40 END MILL C11661

  • Dayton, Ohio, United States
  • Mar 1st
PARLEC CAT40 1" ENDMILL HOLDER C40-10EM4 CAT 40 END MILL LOT C11666

PARLEC CAT40 1" ENDMILL HOLDER C40-10EM4 CAT 40 END MILL LOT C11666

  • Dayton, Ohio, United States
  • Mar 1st
VALENITE CAT40 3/16" DIA ENDMILL HOLDER MORE LISTED CAT 40 END MILL LOT C11646

VALENITE CAT40 3/16" DIA ENDMILL HOLDER MORE LISTED CAT 40 END MILL LOT C11646

  • Dayton, Ohio, United States
  • Mar 1st
UNIVERSAL ENG CAT50 ACURA FLEX 1" SERIES COLLET CHUCK W/ (5) COLLETS LOT C11532

UNIVERSAL ENG CAT50 ACURA FLEX 1" SERIES COLLET CHUCK W/ (5) COLLETS LOT C11532

  • Dayton, Ohio, United States
  • Mar 1st
2 ETM MT 5 Tool Holders EM1x3, EM 1-1 4x3

2 ETM MT 5 Tool Holders EM1x3, EM 1-1 4x3

  • Berlin, Connecticut, United States
  • Mar 1st
Techniks CT40 1 1/4" Dual Drive Contact 4.6 Length CAT40 End Mill Holder 15,000

Techniks CT40 1 1/4" Dual Drive Contact 4.6 Length CAT40 End Mill Holder 15,000

  • Columbus, Ohio, United States
  • Mar 1st
CARBOLOY CAT40 3/4" DIAMETER ENDMILL HOLDER CAT 40 END MILL LOT C11621

CARBOLOY CAT40 3/4" DIAMETER ENDMILL HOLDER CAT 40 END MILL LOT C11621

  • Dayton, Ohio, United States
  • Mar 1st
PARLEC CAT40 1/4" DIA ENDMILL HOLDER MORE LISTED CAT 40 END MILL LOT C11803

PARLEC CAT40 1/4" DIA ENDMILL HOLDER MORE LISTED CAT 40 END MILL LOT C11803

  • Dayton, Ohio, United States
  • Mar 1st
Fadal Pull Stud Retention Knob

Fadal Pull Stud Retention Knob

  • Mount Hope, Ontario, Canada
  • Mar 1st
Kennametal cat30 tool holder #QC30EM050175 For 1/2" Dia. Tooling

Kennametal cat30 tool holder #QC30EM050175 For 1/2" Dia. Tooling

  • Honeoye Falls, New York, United States
  • Mar 1st
PARLEC pc2-2215

PARLEC pc2-2215

  • Waterbury, Connecticut, United States
  • Mar 1st
MST CORP. CAT 40 PRECISION COLLET HOLDER

MST CORP. CAT 40 PRECISION COLLET HOLDER

  • Salem, Ohio, United States
  • Mar 1st
CARBOLOY CAT 45-.750 END MILL HOLDER

CARBOLOY CAT 45-.750 END MILL HOLDER

  • Salem, Ohio, United States
  • Mar 1st
COMMAND CAT 40 5/8" END MILL HOLDER C4E3 0625

COMMAND CAT 40 5/8" END MILL HOLDER C4E3 0625

  • Minneapolis, Minnesota, United States
  • Mar 1st
Huot 40 Taper Tool Storage, 3 Used

Huot 40 Taper Tool Storage, 3 Used

  • Pittsburgh, Pennsylvania, United States
  • Mar 1st
5 VARIOUS CAT 40 TOOL HOLDERS WITH TWO RETENTION KNOBS.

5 VARIOUS CAT 40 TOOL HOLDERS WITH TWO RETENTION KNOBS.

  • Anaheim, California, United States
  • Feb 28th
Kaiser CAT50 Taper Milling Holder 31 mm 1.220" Inch ID 11.335.308 Bore Pull Stud

Kaiser CAT50 Taper Milling Holder 31 mm 1.220" Inch ID 11.335.308 Bore Pull Stud

  • Windsor, Connecticut, United States
  • Feb 28th

People who viewed this item also vieved

Neapco 10-0453 .875" Round PTO Yoke KEYWAY WIDTH.188" Key BORE DIAMETER: 0.875

Neapco 10-0453 .875" Round PTO Yoke KEYWAY WIDTH.188" Key BORE DIAMETER: 0.875

  • New Orleans, Louisiana, United States
  • Jan 30th
ADAPTER 1" TAILSTOCK ADAPTER Morse taper 3

ADAPTER 1" TAILSTOCK ADAPTER Morse taper 3

  • South Gate, California, United States
  • Jan 30th
Small point High Speed Steel HS Boring Bar 4 1/2" long Toolroom Machinist tool

Small point High Speed Steel HS Boring Bar 4 1/2" long Toolroom Machinist tool

  • Latham, New York, United States
  • Jan 30th
High Speed Steel HS Boring Bar Lot 6 3/4" & 4 3/4" long Toolroom Machinist tools

High Speed Steel HS Boring Bar Lot 6 3/4" & 4 3/4" long Toolroom Machinist tools

  • Latham, New York, United States
  • Jan 30th
Nikken BT40 holder 1-1/4 Round, Solid Tool Holder. BT40-WE 1 1/4 A-85

Nikken BT40 holder 1-1/4 Round, Solid Tool Holder. BT40-WE 1 1/4 A-85

  • Palmer Lake, Colorado, United States
  • Jan 30th
Bt40 tool holder's

Bt40 tool holder's

  • San Jose, California, United States
  • Jan 30th
CARBIDE DRAW BUSHING 1 PC TD32XP-.7515 EXTRA PRECISION SOUTHWICK & MEISTER

CARBIDE DRAW BUSHING 1 PC TD32XP-.7515 EXTRA PRECISION SOUTHWICK & MEISTER

  • Hillsboro, Missouri, United States
  • Jan 30th
Command SC34-0375 Equivalent to Parlec 12MCRB-375 Power Milling Bushing

Command SC34-0375 Equivalent to Parlec 12MCRB-375 Power Milling Bushing

  • Rancho Cucamonga, California, United States
  • Jan 30th
DEVLIEG Microbore Carbide Tipped Insert Cartridge 2B1F

DEVLIEG Microbore Carbide Tipped Insert Cartridge 2B1F

  • Johnson City, New York, United States
  • Jan 30th
DEVLIEG Microbore Carbide Tipped Insert Cartridge 1B5F

DEVLIEG Microbore Carbide Tipped Insert Cartridge 1B5F

  • Johnson City, New York, United States
  • Jan 30th
HSK-63 20MM TOOL HOLDER PART# HSK-A63-20-80

HSK-63 20MM TOOL HOLDER PART# HSK-A63-20-80

  • Cadiz, Kentucky, United States
  • Jan 30th
K-TOOL SDCS 903 90 Degree Spot Drill With New Insert!

K-TOOL SDCS 903 90 Degree Spot Drill With New Insert!

  • Watertown, New York, United States
  • Jan 30th
Hanson chuck key replaces Jacobs chuck key K3 chuck size 1/2" & 5/8"

Hanson chuck key replaces Jacobs chuck key K3 chuck size 1/2" & 5/8"

  • Mechanicsville, Virginia, United States
  • Feb 16th
Albrecht (?) Precision Keyless Drill Chuck 1/32"--3/8" 0-10mm w/ MT2 Shank

Albrecht (?) Precision Keyless Drill Chuck 1/32"--3/8" 0-10mm w/ MT2 Shank

  • Golden, Colorado, United States
  • Feb 16th
2 KENNAMETAL DA180 NMTB 30 QUICK CHANGE CHUCKS & 3 DA 180 COLLETS LOT C11692

2 KENNAMETAL DA180 NMTB 30 QUICK CHANGE CHUCKS & 3 DA 180 COLLETS LOT C11692

  • Dayton, Ohio, United States
  • Feb 27th
UNIVERSAL ENGINEERING 80235 KWIK-SWITCH 200 COLLET CHUCK W/5 COLLETS LOT C11631

UNIVERSAL ENGINEERING 80235 KWIK-SWITCH 200 COLLET CHUCK W/5 COLLETS LOT C11631

  • Dayton, Ohio, United States
  • Feb 27th
WHITNON STYLE HELICOIL HIGH SPEED BELT DRIVE GRINDING SPINDLE W/ PRECISE FIXTURE

WHITNON STYLE HELICOIL HIGH SPEED BELT DRIVE GRINDING SPINDLE W/ PRECISE FIXTURE

  • Southington, Connecticut, United States
  • May 16th
NISHIDA HIGH SPEED PRECISION SPINDLE 786K *REFURBISHED*

NISHIDA HIGH SPEED PRECISION SPINDLE 786K *REFURBISHED*

  • Sterling Heights, Michigan, United States
  • May 17th
SUNNEN 4UL-968 MANDREL & TRUING SLEEVE ST-960 ST-968 MACHINIST TOOL & STONES

SUNNEN 4UL-968 MANDREL & TRUING SLEEVE ST-960 ST-968 MACHINIST TOOL & STONES

  • Suffern, New York, United States
  • Jun 8th
NICE MORSE USA 1" x 7" MANDREL TOOL 4 LATHE MACHINIST

NICE MORSE USA 1" x 7" MANDREL TOOL 4 LATHE MACHINIST

  • United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies