+ Post new Ad
SMITH TOOL EXTENDED TAP HOLDERS, 9/16 TAP, US $119.95 – Picture 0
SMITH TOOL EXTENDED TAP HOLDERS, 9/16 TAP, US $119.95 – Picture 0

Smith Tool Extended Tap Holders, 9/16 Tap

US $119.95

  • Orwell, Ohio, United States
  • Jan 30th
Open on mobile:
QR code
SMITH TOOL EXTENDED TAP HOLDERS, 9/16 TAP ~NEW~ (4) TMS-CCTH 401-009-217-3 1101/88109 9/16 Tap   Condition: ~NEW~ Total weight: 7 Lbs. / Ref. No: 180 d ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ PAYMENTS ACCEPTED: * Paypal * Money Orders * Cashiers Checks * Personal Checks * Business Checks * (Items paid by personal or business checks may take longer to be shipped) Payment is expected within 7 days of the auction closing. Because of past history with winning bidder's non-payments, unless stated that payment will be late for an acceptable reason within a timely manner, we will be forced to leave negative feedback. Although we greatly appreciate buyers that figure out their own shipping, and pay immediately; unfortunately it generally causes problems. Please wait until we send you your invoice to pay. Thank You. SHIPPING & HANDLING: All items below 150 Lbs. will be shipped via " United Parcel Service" (UPS) Ground. Unless other provisions are necessary. We will ship world wide. R.P. Machine is responsible for the initial shipping cost only. All other duties and charges are the responsibility of the buyer. Shipping is calculated via the Ebay shipping calculator, using UPS Ground rate. All items have an additional handling charge which will range from between $2.00 and $20.00 depending on the fragility and special packing needs of your items. We need to know if we will be shipping to a business or residential address so that we may better calculate shipping cost. Items above 150 Lbs. will be shipped via freight carrier. Shipping and handling fees may vary by weight and special materials needs. IN THE EVENT OF A DAMAGED SHIPMENT: If an item should arrive to the winning bidders address broken, an insurance or return claim may be made if the following provisions are met: Pictures taken of the damaged item's box as well as the item itself. So that we know what condition the item was in before its return to our facility. Once you have taken the pictures, please e-mail us at rspalesh@orwell.net and report the damage as soon as possible. Steps will then be taken to quickly and efficiently resolve the issue. Note: If you have any questions, please e-mail or call Robert @ (440) 813-0920. Thanks!

Directions

Similar products from Prolongation Tools

Erickson TG100 Collet Chuck Extension 1.5" Shank

Erickson TG100 Collet Chuck Extension 1.5" Shank

  • Johnson City, New York, United States
  • Jan 30th
Scully Jones 23115 Morse Taper Extension Sleeve, 5MT ID x 3MT OD, 2-3/8" Proj.

Scully Jones 23115 Morse Taper Extension Sleeve, 5MT ID x 3MT OD, 2-3/8" Proj.

  • Saint Louis, Missouri, United States
  • Jan 30th
PARLEC HEAVY METAL EXTENSION 1.25" SHANK 14" OAL PC3 PC3E1 (LOC1219B) TS12

PARLEC HEAVY METAL EXTENSION 1.25" SHANK 14" OAL PC3 PC3E1 (LOC1219B) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
1/2" Hole 1" Shank 7.4" Extra Length Long End Mill Adapter Cutter Tool Holder

1/2" Hole 1" Shank 7.4" Extra Length Long End Mill Adapter Cutter Tool Holder

  • Grand Rapids, Michigan, United States
  • Jan 30th
ER16 collet chuck 3/4" str. shank & 12 pcs. ER16 collets 1/16" - 13/32" by 16ths

ER16 collet chuck 3/4" str. shank & 12 pcs. ER16 collets 1/16" - 13/32" by 16ths

  • Addison, Illinois, United States
  • Jan 30th
KENNAMETAL SHORT COLLET EXTENSION 1/2" DIAMETER SHANK W/ ASSORTED DA 300 COLLETS

KENNAMETAL SHORT COLLET EXTENSION 1/2" DIAMETER SHANK W/ ASSORTED DA 300 COLLETS

  • Ellington, New York, United States
  • Jan 30th
PAIR OF SHORT COLLET EXTENSIONS 5/8" DIAMETER SHANK W/ COLLETS

PAIR OF SHORT COLLET EXTENSIONS 5/8" DIAMETER SHANK W/ COLLETS

  • Ellington, New York, United States
  • Jan 30th
PAIR OF NEW KENNAMETAL DA-200 SHORT COLLET EXTENSIONS J12DA208250

PAIR OF NEW KENNAMETAL DA-200 SHORT COLLET EXTENSIONS J12DA208250

  • Ellington, New York, United States
  • Jan 30th
Lot Of 3 Used Integral Shank Tap Chuck Extensions 23/64 5/16 1/4

Lot Of 3 Used Integral Shank Tap Chuck Extensions 23/64 5/16 1/4

  • Nampa, Idaho, United States
  • Jan 30th
Erickson LER16M Cap for Collet Tool Holders

Erickson LER16M Cap for Collet Tool Holders

  • Lebanon, Tennessee, United States
  • Jan 30th
JACOBS MFG CO. #834 ETENSION SOCKET 1.89" DIAMETER

JACOBS MFG CO. #834 ETENSION SOCKET 1.89" DIAMETER

  • Apache Junction, Arizona, United States
  • Jan 30th
TSD/UNIVERSAL AG COLLET CHUCK EXTENSIONS P/N 90785

TSD/UNIVERSAL AG COLLET CHUCK EXTENSIONS P/N 90785

  • Orwell, Ohio, United States
  • Jan 30th
TSD/UNIVERSAL AG COLLET CHUCK EXTENSIONS P/N 90542

TSD/UNIVERSAL AG COLLET CHUCK EXTENSIONS P/N 90542

  • Orwell, Ohio, United States
  • Jan 30th
TSD/UNIVERSAL ACURA GRIP COLLET CHUCK EXTENSIONS

TSD/UNIVERSAL ACURA GRIP COLLET CHUCK EXTENSIONS

  • Orwell, Ohio, United States
  • Jan 30th
Komet 20106 100mm x 150mm Tool Holder Extension

Komet 20106 100mm x 150mm Tool Holder Extension

  • Brimfield, Illinois, United States
  • Jan 30th
ER11 5/8" SS COLLET EXTENSION W/WRENCH

ER11 5/8" SS COLLET EXTENSION W/WRENCH

  • Newington, Connecticut, United States
  • Jan 30th
JACOBS 30480 573 Capstan Lathe Turret Socket MT NEW E4

JACOBS 30480 573 Capstan Lathe Turret Socket MT NEW E4

  • Saint Louis, Missouri, United States
  • Jan 30th
HARDINGE 1/2" RIGHT HAND EXTENSION TOOL HOLDER #CC-25R

HARDINGE 1/2" RIGHT HAND EXTENSION TOOL HOLDER #CC-25R

  • Baltimore, MD, United States
  • Jan 30th
RTW CTEPL 12-3 Toolholder

RTW CTEPL 12-3 Toolholder

  • Peoria, Illinois, United States
  • Jan 30th
Kennametal 1187092 NF2 Toolholder Extension

Kennametal 1187092 NF2 Toolholder Extension

  • Peoria, Illinois, United States
  • Jan 30th

People who viewed this item also vieved

(2) TECHNIKS CAT50 TAPPING HEADS

(2) TECHNIKS CAT50 TAPPING HEADS

  • Philadelphia, Pennsylvania, United States
  • Mar 9th
Techniks Retention Knob Socket Fits Any BT CT 40 Taper PSS-40 Pull Stud

Techniks Retention Knob Socket Fits Any BT CT 40 Taper PSS-40 Pull Stud

  • Columbus, Ohio, United States
  • Mar 9th
3/4" A12-SDXPR3 Boring Bar 10" Long

3/4" A12-SDXPR3 Boring Bar 10" Long

  • United States
  • Mar 11th
Flynn Model 63 Offset Boring Head/Bar For Bridgeport R- 8 Criterion Style

Flynn Model 63 Offset Boring Head/Bar For Bridgeport R- 8 Criterion Style

  • Franklinville, New York, United States
  • Mar 11th
USED SNAP TAP CER 075 5-10Q 3/4" SHANK

USED SNAP TAP CER 075 5-10Q 3/4" SHANK

  • San Bernardino, California, United States
  • Mar 25th
NEW SECO CARBOLOY R217.99-01.25-3-09-3A indexable end mill coolant USA 1-1/4" D

NEW SECO CARBOLOY R217.99-01.25-3-09-3A indexable end mill coolant USA 1-1/4" D

  • San Marcos, California, United States
  • Mar 25th
ENCO SAW TOOL HOLDER FOR R8 MILLING MACHINE SPINDLE

ENCO SAW TOOL HOLDER FOR R8 MILLING MACHINE SPINDLE

  • Los Angeles, California, United States
  • Apr 23rd
Enerpac 30 Ton Arbor Press,with Enerpac Cylinder And 10,000 PSI Max Air Motor.

Enerpac 30 Ton Arbor Press,with Enerpac Cylinder And 10,000 PSI Max Air Motor.

  • Decatur, Illinois, United States
  • Apr 23rd
NEW NO NAME BRASS BRONZE BUSHING 3/8" ID 1/2" OD 3/8" WIDTH "LOT OF 3"

NEW NO NAME BRASS BRONZE BUSHING 3/8" ID 1/2" OD 3/8" WIDTH "LOT OF 3"

  • Clover, South Carolina, United States
  • May 12th
Heinrich Drill Jig

Heinrich Drill Jig

  • Webster, Florida, United States
  • May 13th
Nikken Lyndex BT40 5/8" End Mill Holder B4016-0625 x 4"

Nikken Lyndex BT40 5/8" End Mill Holder B4016-0625 x 4"

  • Terryville, Connecticut, United States
  • May 24th
Nikken Lyndex BT40 3/4" .75 End Mill Holder B4016-0750 x 4"

Nikken Lyndex BT40 3/4" .75 End Mill Holder B4016-0750 x 4"

  • Terryville, Connecticut, United States
  • May 24th
New tormach reversing tapping head procunier

New tormach reversing tapping head procunier

  • Erie, Pennsylvania, United States
  • May 26th
Tormach tts spindle speeder 30k rpm

Tormach tts spindle speeder 30k rpm

  • Erie, Pennsylvania, United States
  • May 26th
VINTAGE JACOBS CHUCK No.1B 0- 1/4 AND JACOBS CHUCK No.0 - 5/32" w/arbor and key

VINTAGE JACOBS CHUCK No.1B 0- 1/4 AND JACOBS CHUCK No.0 - 5/32" w/arbor and key

  • Wild Rose, Wisconsin, United States
  • Jun 4th
T.J. CLARK CABLE CAPACITY 1/0 - 2/0 MODEL CRTP21

T.J. CLARK CABLE CAPACITY 1/0 - 2/0 MODEL CRTP21

  • Reston, Virginia, United States
  • Jun 4th
2 Komet A2000020 ABS 25-V45 Extension Tool Holders

2 Komet A2000020 ABS 25-V45 Extension Tool Holders

  • Millstone Township, New Jersey, United States
  • Jun 4th
BILZ WEN 2 16X12.5 Tap Collet, 84130403

BILZ WEN 2 16X12.5 Tap Collet, 84130403

  • Lebanon, Tennessee, United States
  • Jun 4th
LOT OF 6 NEW SUNNEN HONE MANDRELS BL3-114CH - BL3-116CS

LOT OF 6 NEW SUNNEN HONE MANDRELS BL3-114CH - BL3-116CS

  • Ellington, New York, United States
  • Jun 9th
LOT OF 12 NEW SUNNEN HONE MANDRELS BL5-150CH - BL5-180CH

LOT OF 12 NEW SUNNEN HONE MANDRELS BL5-150CH - BL5-180CH

  • Ellington, New York, United States
  • Jun 9th
Precision Grinding Spindle 60mm Dia. Internal external mint!

Precision Grinding Spindle 60mm Dia. Internal external mint!

  • Middle Island, New York, United States
  • Oct 20th
6KW Square Air Cooled Spindle Motor ER32 300Hz 18000rpm For CNC Router Machine

6KW Square Air Cooled Spindle Motor ER32 300Hz 18000rpm For CNC Router Machine

  • Changzhou,Jiangsu, China
  • Oct 21st

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies