Snap On MM140SL Muscle MIG FLEX-TIG/MIG Welder With Wire Fed Spool Gun, US $1,500.00 – Picture 0

Snap On MM140SL Muscle MIG FLEX-TIG/MIG Welder With Wire Fed Spool Gun, US $1,500.00 – Picture 1

Snap On MM140SL Muscle MIG FLEX-TIG/MIG Welder With Wire Fed Spool Gun, US $1,500.00 – Picture 2

Snap On MM140SL Muscle MIG FLEX-TIG/MIG Welder With Wire Fed Spool Gun, US $1,500.00 – Picture 3

Snap On MM140SL Muscle MIG FLEX-TIG/MIG Welder With Wire Fed Spool Gun, US $1,500.00 – Picture 4

Snap On MM140SL Muscle MIG FLEX-TIG/MIG Welder With Wire Fed Spool Gun, US $1,500.00 – Picture 5

Snap On MM140SL Muscle MIG FLEX-TIG/MIG Welder With Wire Fed Spool Gun, US $1,500.00 – Picture 6

Snap On MM140SL Muscle MIG FLEX-TIG/MIG Welder With Wire Fed Spool Gun, US $1,500.00 – Picture 7

Snap On MM140SL Muscle MIG FLEX-TIG/MIG Welder With Wire Fed Spool Gun, US $1,500.00 – Picture 8

Snap On MM140SL Muscle MIG FLEX-TIG/MIG Welder With Wire Fed Spool Gun, US $1,500.00 – Picture 9

Snap On MM140SL Muscle MIG FLEX-TIG/MIG Welder With Wire Fed Spool Gun, US $1,500.00 – Picture 10

Snap On MM140SL Muscle MIG FLEX-TIG/MIG Welder With Wire Fed Spool Gun, US $1,500.00 – Picture 11

Snap On Mm140sl Muscle Mig Flex-tig/mig Welder With Wire Fed Spool Gun

US $1,500.00

Sarasota, Florida, United States
Mar 11th

Open on mobile:
QR code

MM140SL M.I.G. COMBINATION UNIT YOU HAVE PURCHASED THE WORLDS FINEST 115VOLT AC SINGLE PHASE MIG WELDING SYSTEM AVAILABLE EXCLUSIVELY FROM SNAP-ON TOOLS. THE SNAP-ON MUSCLE MIG SYSTEM MODEL# MM140SL IS DESIGNED AND ENGINEERED BY THE PROS FOR THE PROS. UNDER NORMAL CARE THIS SYSTEM WILL PROVIDE YOU WITH YEARS OF UNSURPASSED SERVICE AND MOST IMPORTANTLY PERFORMANCE. DESCRIPTION SPECIFICATIONS The MM140SL consists of a combination MIG welding power source and remote feed unit, a MIG torch with 10 foot cable, a fifteen foot feeder control cable, a fifteen foot work cable with clamp, a twenty foot power input cable, a gas regulator - flowmeter, a torch accessory kit, and a built-in cylinder rack and industrial wheel kit. Welder controls are simple and clearly marked. The output voltage is controlled by a twelve position tap switch, providing 4 TIG and 8 MIG voltage selections. Wire feed speed is controlled by the wire speed potentiometer. A SPOT WELD control switch and adjustable timer circuit provides Consumable MIG Spot Welding capabilities of light gauge steel. SPECIFICATIONS PART NUMBER: MM140SL INPUT POWER REQUIREMENTS: Voltage 115 volts AC Phase single phase Frequency 50/60 hertz Current (see below) OUTPUT POWER @ 100% Duty Cycle: 15 Amps Input Current= 100 Amps 20 Amps Input Current= 120 Amps 30 Amps Input Current= 140 Amps DUTY CYCLE TIME PERIOD: 10 minutes OPEN CIRCUIT VOLTAGE: 18 - 33 volts DC ARC VOLTAGE: 14 - 26 volts DC WELD CURRENT RANGE: 30 - 140 amps REMOTE FEED UNIT Input Voltage 28 VAC Wire Feed Speed Range: 50-800 IPM DUTY CYCLE - SPOT WELDING: 30 X 2 second spots per 10 minute period SPOT WELD TIME: 0 TO 3 seconds WIRE TYPES: mild steel, stainless steel, aluminum, bronze, flux cored, flux cored - gasless WIRE SIZES: .023" - .045" steel, 3/64" aluminum, (.023" - 3/64" alum. w/spool gun) .030" - .035" bronze, .035" - .045" flux cored (gas shielded or gasless) SHIELDING GASES: For Steel CO2 or Argon/CO2 mix For Aluminum, Bronze Argon For Stainless Steel 98% Argon/2% Oxygen For Flux cored CO2 or Argon/CO2 mix DIMENSIONS: Height 32-1/4 in.(81.9 cm.) Width 14-1/2 in.(36.8 cm.) Depth 26-1/4 in.(66.7 cm.) Weight 155 lbs.(70.4 kg.)

“In good condition. A little paint peeling up other than that in great condition.”

Brand	Snap-on
Power Source	110/120V Electric
Model	MM140SL
Current	1 Phase
Processes	MIG, TIG