+ Post new Ad
South bend lathe 9" original GE motor and drum switch wired 110 volt runs nice, US $35 – Picture 0
South bend lathe 9" original GE motor and drum switch wired 110 volt runs nice, US $35 – Picture 0

South Bend Lathe 9" Original Ge Motor And Drum Switch Wired 110 Volt Runs Nice

US $35

  • Wappingers Falls, New York, United States
  • May 30th
Open on mobile:
QR code
This is a very nice running General Electric motor from a 9" South Bend lathe. This is original from South Bend. It is a 1/2 HP 1725 RPM single phase 110/230 volt wired for 110 volts and controlled by the original Furnas forward/reverse drum switch. It works excellent in both directions. The wiring is all intact,but I would replace with new updated cord. This has a 3/4" keyed shaft and the base bolts right up to the 9" South Bend motor mount. It could use a cleaning, but in good overall condition. Free shipping!!! Paypal for payment.

Directions

Similar products from Sleeves

19ZC671D1 Sleeve Bushing Set Screws not Included

19ZC671D1 Sleeve Bushing Set Screws not Included

  • Huntsville, Alabama, United States
  • May 31st
NEW BROWNING Q1-1 5/16, BUSHING, SPLIT TAPER, NEW IN FACTORY BOX, NEW OLD STOCK

NEW BROWNING Q1-1 5/16, BUSHING, SPLIT TAPER, NEW IN FACTORY BOX, NEW OLD STOCK

  • Rockingham, North Carolina, United States
  • May 30th
METAL OIL LESS BUSHING

METAL OIL LESS BUSHING

  • Buffalo Grove, Illinois, United States
  • May 30th
REXNORD KEYED FLANGED COUPLING 262-SN 1-7/8" BORE 262SN

REXNORD KEYED FLANGED COUPLING 262-SN 1-7/8" BORE 262SN

  • Clover, South Carolina, United States
  • May 30th
REXNORD KEYED FLANGED COUPLING 262-SN 2" BORE 262SN

REXNORD KEYED FLANGED COUPLING 262-SN 2" BORE 262SN

  • Clover, South Carolina, United States
  • May 30th
NEW in Box Taper Bushing 1210 1 1/8

NEW in Box Taper Bushing 1210 1 1/8

  • Robertsdale, Alabama, United States
  • May 30th
Browning Bushing Q1 2, 2" Bore ID, 4 1/8" OD

Browning Bushing Q1 2, 2" Bore ID, 4 1/8" OD

  • Evansville, Indiana, United States
  • May 30th
DODGE 2012 1-11/16" TAPER LOCK DRIVE BUSHING

DODGE 2012 1-11/16" TAPER LOCK DRIVE BUSHING

  • Robertsdale, Alabama, United States
  • May 30th
Martin SH 1/2 Quick Disconnect Bushing, Sintered Steel, Inch, 0.5" Bore, 1.871"

Martin SH 1/2 Quick Disconnect Bushing, Sintered Steel, Inch, 0.5" Bore, 1.871"

  • USA, United States
  • May 30th
Martin SDS 1 1/8 Quick Disconnect Bushing, Sintered Steel, Inch, 1.13" Bore,

Martin SDS 1 1/8 Quick Disconnect Bushing, Sintered Steel, Inch, 1.13" Bore,

  • USA, United States
  • May 30th
G108512 NOS HARDENED STEEL BUSHING O.D. 1.9673" LOT OF 50 PCS.

G108512 NOS HARDENED STEEL BUSHING O.D. 1.9673" LOT OF 50 PCS.

  • Kendallville, Indiana, United States
  • May 30th
CNC Lathe Tool Bushing OD 1 3/4" ID 3/4" /Mazak/Mori Seiki/Haas

CNC Lathe Tool Bushing OD 1 3/4" ID 3/4" /Mazak/Mori Seiki/Haas

  • De Pere, Wisconsin, United States
  • May 30th
DODGE - Taper-Lock Bushing #117221 3535 x 2-3/8 KW

DODGE - Taper-Lock Bushing #117221 3535 x 2-3/8 KW

  • Sainte Genevieve, Missouri, United States
  • May 30th
Gates 3535 3 1/4" Taper Lock Bushing Type VT

Gates 3535 3 1/4" Taper Lock Bushing Type VT

  • Sainte Genevieve, Missouri, United States
  • May 30th
Dodge 3030 Taper-Lock Bushing, 2 3/4" Bore

Dodge 3030 Taper-Lock Bushing, 2 3/4" Bore

  • Sainte Genevieve, Missouri, United States
  • May 30th
SF1716 bushing

SF1716 bushing

  • North Wilkesboro, North Carolina, United States
  • May 30th
MARTIN SDS 1-1/2" QD BUSHING

MARTIN SDS 1-1/2" QD BUSHING

  • Robertsdale, Alabama, United States
  • May 30th
MARTIN JA 1-3/16 QD BUSHING

MARTIN JA 1-3/16 QD BUSHING

  • Robertsdale, Alabama, United States
  • May 30th
United Drill Bushings Headless Steel 27/32" x 1-3/8" OAL, QTY 6, P88-24 |KH2| RL

United Drill Bushings Headless Steel 27/32" x 1-3/8" OAL, QTY 6, P88-24 |KH2| RL

  • Saint Louis, Missouri, United States
  • May 30th
DODGE 1610 X 1-7/16" KW TAPER LOCK BUSHING

DODGE 1610 X 1-7/16" KW TAPER LOCK BUSHING

  • Robertsdale, Alabama, United States
  • May 30th

People who viewed this item also vieved

#2 MT TO #4 MT EXTENSION MT2 SHANK WITH MT4 HOLE MORSE TAPER

#2 MT TO #4 MT EXTENSION MT2 SHANK WITH MT4 HOLE MORSE TAPER

  • Mobile, Alabama, United States
  • Jan 30th
Lot of 4 New Old Stock Morse Taper Shank Sockets

Lot of 4 New Old Stock Morse Taper Shank Sockets

  • Mount Wolf, Pennsylvania, United States
  • Jan 30th
18MM INDEXABLE BORING BAR - 140L - START BORE 16MM + 10PCS INSERTS MILLING #L119

18MM INDEXABLE BORING BAR - 140L - START BORE 16MM + 10PCS INSERTS MILLING #L119

  • Hong Kong, Hong Kong
  • Jan 30th
1PC. 12MM SHORT INDEXABLE BORING BAR WITH 10PC MITSUBISHI INSERTS CNC MILL #L100

1PC. 12MM SHORT INDEXABLE BORING BAR WITH 10PC MITSUBISHI INSERTS CNC MILL #L100

  • Hong Kong, Hong Kong
  • Jan 30th
Jacobs Chuck 0065652 DIN 376 Rigid Tap Collet 3, M33 25.0mm Shank 20.0mm

Jacobs Chuck 0065652 DIN 376 Rigid Tap Collet 3, M33 25.0mm Shank 20.0mm

  • Wichita, Kansas, United States
  • Jan 30th
Jacobs Chuck 0080722-51FC CAT V 40 ER 20 Tool Holder B (DIN B) Flange Coolant 6"

Jacobs Chuck 0080722-51FC CAT V 40 ER 20 Tool Holder B (DIN B) Flange Coolant 6"

  • Wichita, Kansas, United States
  • Jan 30th
BENCH TOP TOOL REMOVAL FIXTURE

BENCH TOP TOOL REMOVAL FIXTURE

  • Ellington, New York, United States
  • Jan 30th
ETM CAT 50 FACE MILL ARBOR 50 SM2.50 2.87

ETM CAT 50 FACE MILL ARBOR 50 SM2.50 2.87

  • Wadley, Alabama, United States
  • Jan 30th
Jacobs Model 2A Key Type Taper Mounted Medium Duty Chucks, 2JT

Jacobs Model 2A Key Type Taper Mounted Medium Duty Chucks, 2JT

  • Staten Island, New York, United States
  • Jan 30th
Jacobs Chuck - JKP100-J2 - Keyless Drill Chuck, 0.394 in

Jacobs Chuck - JKP100-J2 - Keyless Drill Chuck, 0.394 in

  • Staten Island, New York, United States
  • Jan 30th
Ingersoll 10 x AOMT 160508R IN 2015 NEW!!!

Ingersoll 10 x AOMT 160508R IN 2015 NEW!!!

  • Duisburg, Germany
  • Jan 30th
ISCAR 10 x APKT 1003 PDR-HM IC 328 NEW!!!

ISCAR 10 x APKT 1003 PDR-HM IC 328 NEW!!!

  • Duisburg, Germany
  • Jan 30th
Armstrong No. 9 Tool Holder

Armstrong No. 9 Tool Holder

  • Garden City, Idaho, United States
  • Jan 30th
Armstrong No. 32 R Tool Holder

Armstrong No. 32 R Tool Holder

  • Garden City, Idaho, United States
  • Jan 30th
Eclipse 1H-M2 Magic Chuck Tool Holder Quick Change 1/2" Capacity Bore

Eclipse 1H-M2 Magic Chuck Tool Holder Quick Change 1/2" Capacity Bore

  • DeKalb, Illinois, United States
  • Feb 13th
Armstrong BX size 81-043 10 Tool Holder USA (930-200-6)

Armstrong BX size 81-043 10 Tool Holder USA (930-200-6)

  • Oxford, Pennsylvania, United States
  • Feb 13th
2.2KW Water cooled 220V spindle motor ER20 & 2.2kw Inverter VFD & 80mm Fixture

2.2KW Water cooled 220V spindle motor ER20 & 2.2kw Inverter VFD & 80mm Fixture

  • ???, ???, China
  • Mar 25th
NEW 80MM ER11 COLLET MOTOR SPINDLE 1.5KW WATER-COOLED ENGRAVING MILLING GRIND

NEW 80MM ER11 COLLET MOTOR SPINDLE 1.5KW WATER-COOLED ENGRAVING MILLING GRIND

  • Shanghai Door to Door Service, China
  • Mar 25th
(4) SHADE 5 FILTER PLATES 2" X 4-1/4" BURNING -WELDING # 5 SHADE

(4) SHADE 5 FILTER PLATES 2" X 4-1/4" BURNING -WELDING # 5 SHADE

  • Schererville, Indiana, United States
  • Mar 29th
RUSSELL 4020 CARB INLET FITTING HOLLEY SINGLE FEED / 4160

RUSSELL 4020 CARB INLET FITTING HOLLEY SINGLE FEED / 4160

  • Schererville, Indiana, United States
  • Apr 22nd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies