Sparkfun Micromod Stm32 Processor

US $17.19

Swanton, Vermont, United States
Jul 16th

Open on mobile:
QR code

Description SparkFun MicroMod STM32 Processor Offers the most powerful and economical microcontrollers Comes with the M.2 MicroMod connector Features a floating-point unit (FPU) single precision Provides an economical and easy to use development platform Utilizes the DFU bootloader for uploading code The SparkFun MicroMod STM32 Processor provides you with an economical and easy-to-use development platform if you're needing more power with minimal working space. With the M.2 MicroMod connector, connecting your STM32 Processor is a breeze. Simply match up the key on your processor's beveled edge connector to the key on the M.2 connector and secure it with a screw (included with all Carrier Boards). The STM32 is one of the most powerful and economical microcontrollers available so to be able to add it to your MicroMod Carrier Board is a huge advantage for your project! Specifications 1 Mbyte of Flash memory 192 Kbytes of SRAM including 64 Kbytes of CCM (core coupled memory) data RAM Flexible static memory controller supporting Compact Flash, SRAM, PSRAM, NOR and NAND memories ARM 32-bit Cortex-M4 CPU with FPU Adaptive real-time accelerator (ART Accelerator) allowing 0-wait state execution from Flash memory Frequency up to 168 MHz Memory protection unit 210 DMIPS/ 1.25 DMIPS/MHz (Dhrystone 2.1) DSP instructions Clock, reset, and supply management 1.8 to 3.6 V application supply and I/Os 32 kHz oscillator for RTC with calibration Internal 32 kHz RC with calibration Low-power operation Sleep, Stop and Standby modes Debug mode Serial wire debug (SWD) & JTAG interfaces Cortex-M4 Embedded Trace Macrocell Advanced connectivity USB 2.0 full-speed device/host/OTG controller with on-chip PHY USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI 10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII Specific Peripherals available on MicroMod STM32: UART Two I2C Buses SPI Bus PDM Audio Processing Two Dedicated Analog Inputs, 15 total analog input capable inputs Two Dedicated Digital I/O Pins Two Dedicated PWM Pins, 24 total PWM capable Nine General Purpose I/O Pins What's Included 1 x SparkFun MicroMod STM32 Processor Dimensions Size 22 x 22 mm (L x W) Multimedia

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Sparkfun Electronics
Type	Sparkfun Electronics
MPN	DEV-17713
UPC	Does not apply