Spartan IW50s Ton Ironworker, US $23000 – Picture 0

Spartan IW50s Ton Ironworker, US $23000 – Picture 1

Spartan IW50s Ton Ironworker, US $23000 – Picture 2

Spartan Iw50s Ton Ironworker

US $23000

Spokane, Washington, United States
Feb 24th

Open on mobile:
QR code

MSIW50S SPARTAN IRONWORKER STANDARD SPARTAN MSIW50S, HEAVY-DUTY, COMPLETELY INTEGRATED IRONWORKER WITH 50 TON CAPACITY, 5 H.P., 6-7/8” THROAT, 5 WORK STATIONS AND FULL CONTROL FOOT PEDAL Capacities & Specifications Rated on 65,000 PSI Tensile PUNCHING Punch Pressure: 50 tons. Punch Holder and Jog Mode. Punch Work Table: Includes adjustable stops for x & y axis. Adjustable See-Through Punch Stripper: For fast and easy setup. Die Holder: Adjustable in machined T-slots for quick punch and die alignment. Standard Tooling: 1” in 1/2” (22 X 15mm) material. Maximum 1-1/2” in 5/16” (38 X 8mm) material. Throat Depth: 6-7/8” (175mm). Stroke Length: 1-15/16” (50mm). Cycles per Minute in 3/4”: 20. Punching Station Work Height: 36-3/4” (935mm). FLAT BAR SHEARING Flat Bar Shear Capacity: 11-3/4” in 1/2” Angle Flange Trim Capacity: 3-1/8” in 3/8” Lower Blade: Four (4) usable edges. Support Table: Includes guides for accurate positioning and indicator lines at 30 and 45 degrees left and right. Upper Shear Blade: Provides for minimum distortion. Blade Length: 12-7/16”. Flat Bar Shear Work Height: 36-3/4” (935mm). ANGLE SHEARING Maximum Capacity – 90 degrees: 4” x 4” in 3/8”. Angle Shear Capacity-45 degrees: 2-3/4” in 1/4” Shearing with no material loss and minimum deformity. Shear Blades: Four (4) usable edges. Angle Shear Work Height: 44-7/8”. BAR SHEARING Max. Round Bar Capacity: 1-3/16”. Max. Square Bar Capacity: 1” x 1”. Four Cavity Round and Square Bar Shear Sizes: Round - 1/8”, 1 3/16”; Square - 5/8”, 1”. Channel Shear Max. (optional): 3”. H-Beam Shear Max. (optional): 3”. Bar Shearing Work Height: 44-7/8” NOTCHING Rectangular Notcher: 1-3/8”” x 3” in 5/16” Notching work Height: 36-3/4” (935mm) Five (5) Sets of Punches and Dies: Punches: 9/16”, 11/16”, 13/16”, 15/16”, 1-1/16” Dies: 19/32”, 23/32”, 27/32”, 31/32”, 1-3/32” CPD Series: 20 punch, 55 die Magnetic Base Work Light 24 Volt DC Control Voltage Scrap Boxes at Punching and Notching Stations Adjustable Stroke Depth at Punch Station Full-Control Foot Pedal Two (2) Piece Gauging Table at Punch Station Keyed Punch Holder for Shaped Tooling Standard Voltage 230/460 Volt, 3 Phase, 60Hz. Machine Shipping Weight: 2,570 lbs (1165kg). Machine Dimensions: 56-1/2” L x 37.5” W 66-1/4” H Machine is in pristine condition only used a handful of times. Machine is wired 230 3phase Any questions please call Dustin At A.R.Tools and Machinery 509-922-2060 Thanks

Condition	Used : An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“Slightly used demo machine. Barely used....”