+ Post new Ad
SPECIAL 12.5mm .492" xtra long flute coolant carbide drill. 14+" OAL, TiAlN Coat, US $149.99 – Picture 0
SPECIAL 12.5mm .492" xtra long flute coolant carbide drill. 14+" OAL, TiAlN Coat, US $149.99 – Picture 1
SPECIAL 12.5mm .492" xtra long flute coolant carbide drill. 14+" OAL, TiAlN Coat, US $149.99 – Picture 2
SPECIAL 12.5mm .492" xtra long flute coolant carbide drill. 14+" OAL, TiAlN Coat, US $149.99 – Picture 3
SPECIAL 12.5mm .492" xtra long flute coolant carbide drill. 14+" OAL, TiAlN Coat, US $149.99 – Picture 4
SPECIAL 12.5mm .492" xtra long flute coolant carbide drill. 14+" OAL, TiAlN Coat, US $149.99 – Picture 0
SPECIAL 12.5mm .492" xtra long flute coolant carbide drill. 14+" OAL, TiAlN Coat, US $149.99 – Picture 1
SPECIAL 12.5mm .492" xtra long flute coolant carbide drill. 14+" OAL, TiAlN Coat, US $149.99 – Picture 2
SPECIAL 12.5mm .492" xtra long flute coolant carbide drill. 14+" OAL, TiAlN Coat, US $149.99 – Picture 3
SPECIAL 12.5mm .492" xtra long flute coolant carbide drill. 14+" OAL, TiAlN Coat, US $149.99 – Picture 4

Special 12.5mm .492" Xtra Long Flute Coolant Carbide Drill. 14+" Oal, Tialn Coat

US $149.99

  • Rochester, Michigan, United States
  • Jun 9th
Open on mobile:
QR code
For sale is a specialized carbide coolant through drill. It measures 12.5mm or .4921" in diameter. Over 14" OAL and 11.5" of flute (about 23XD). It also has about a 2.5" margin for pilot clearance (pictured). Has TiAlN coating. This is a very difficult drill to use efficiently and demands very hi pressure cooling flow. Please ask any questions before placing a bid or making a purchase as we do not accept returns. Again, this is a high performance tool that should be purchased by professionals only. We take pride in our 100% positive feedback and will answer any questions ASAP. Thank you very much for looking and good luck!
“Drill was sharpened and coated by CJT on 06/13/2008 and has been on our shelf untouched since. It is as good as NEW.”
Brand CJT
Country/Region of Manufacture United States
Model KOOLTWIST

Directions

Similar products from Coolant Gun Drills

SECO SD105-17.00/17.99-95-0750R7 CrownLoc Repaceable Tip Drill bit

SECO SD105-17.00/17.99-95-0750R7 CrownLoc Repaceable Tip Drill bit

  • Akron, Ohio, United States
  • Jun 9th
Cleveland Twist Drill 1-1/32" x 7-5/16" x 11-1/8" Coolant SS Drill 2F HSS LH

Cleveland Twist Drill 1-1/32" x 7-5/16" x 11-1/8" Coolant SS Drill 2F HSS LH

  • Venice, Florida, United States
  • Jun 9th
Valenite Val-U-Dex Indexable 3/4" Drill VT40-WD075R-256

Valenite Val-U-Dex Indexable 3/4" Drill VT40-WD075R-256

  • Flint, Michigan, United States
  • Jun 9th
Valenite Val-U-Dex Indexable 1" Drill FT50-WD100R-334 WCEM-2.521-1P

Valenite Val-U-Dex Indexable 1" Drill FT50-WD100R-334 WCEM-2.521-1P

  • Flint, Michigan, United States
  • Jun 9th
Valenite Indexable 1" Drill VM40-VWDR-1000

Valenite Indexable 1" Drill VM40-VWDR-1000

  • Flint, Michigan, United States
  • Jun 9th
(20) Assorted New Drills Kennametal HY-PRO CARB Sandvik

(20) Assorted New Drills Kennametal HY-PRO CARB Sandvik

  • INDIANA, United States
  • Jun 9th
Cleveland C09362 21/32" x 5/8" x 10" x 14-5/8" 2F HSS Blk Oxide Coolant XL Drill

Cleveland C09362 21/32" x 5/8" x 10" x 14-5/8" 2F HSS Blk Oxide Coolant XL Drill

  • Venice, Florida, United States
  • Jun 9th
DORMER coolant carbide drill. 23/32" .719", resharpened. Heavy carbide!!

DORMER coolant carbide drill. 23/32" .719", resharpened. Heavy carbide!!

  • Rochester, Michigan, United States
  • Jun 9th
CJT DURAPOINT Solid carbide drill 114. 23/32 .719" ground rear shank. TiN coat

CJT DURAPOINT Solid carbide drill 114. 23/32 .719" ground rear shank. TiN coat

  • Rochester, Michigan, United States
  • Jun 9th
CJT KOOLTWIST coolant carbide drill 293. TiN coat 15/32 .469" BRAND NEW STOCK!!

CJT KOOLTWIST coolant carbide drill 293. TiN coat 15/32 .469" BRAND NEW STOCK!!

  • Rochester, Michigan, United States
  • Jun 9th
SANDVIK COROMANT??? 1 3/8 Indexable Carbide Insert Drill coolant

SANDVIK COROMANT??? 1 3/8 Indexable Carbide Insert Drill coolant

  • Colchester, Connecticut, United States
  • Jun 9th
SANDVIK COROMANT?? uk50500 3/4 Indexable Carbide Insert Drill coolant, NO TEETH

SANDVIK COROMANT?? uk50500 3/4 Indexable Carbide Insert Drill coolant, NO TEETH

  • Colchester, Connecticut, United States
  • Jun 9th
ACCULUBE 1 GALLON LB-6100

ACCULUBE 1 GALLON LB-6100

  • Duncan, South Carolina, United States
  • Jun 8th
iscar 3XD DSM 0.591-177-075A-3D Charmdrill Jet Indexable Head Coolant Through

iscar 3XD DSM 0.591-177-075A-3D Charmdrill Jet Indexable Head Coolant Through

  • Houston, Texas, United States
  • Jun 8th
12.25MM .482" Sandvik Coromant R411.5-12232 DC12.25 COOLANT CARBIDE TIPPED DRILL

12.25MM .482" Sandvik Coromant R411.5-12232 DC12.25 COOLANT CARBIDE TIPPED DRILL

  • Minneapolis, Minnesota, United States
  • Jun 8th
USED WALTER WAUKESHA 1-1/2" INSERT COOLANT DRILL with APM SHANK

USED WALTER WAUKESHA 1-1/2" INSERT COOLANT DRILL with APM SHANK

  • Fairfield, Iowa, United States
  • Jun 8th
FTI 4-98-M-7 4 Flute Step Drill/ Reamer 3.90 x 5.1 (C-48-F)

FTI 4-98-M-7 4 Flute Step Drill/ Reamer 3.90 x 5.1 (C-48-F)

  • Oxford, Pennsylvania, United States
  • Jun 8th
KENNAMETAL 5118366 KC7315 CARBIDE STEP DRILL COOLANT 20.50MM .807 TO .985

KENNAMETAL 5118366 KC7315 CARBIDE STEP DRILL COOLANT 20.50MM .807 TO .985

  • Minneapolis, Minnesota, United States
  • Jun 8th
USED WAUKESHA USA 2-15/16" COR-BOR INSERT DRILL with APM SHANK 8411-0260F 2.937"

USED WAUKESHA USA 2-15/16" COR-BOR INSERT DRILL with APM SHANK 8411-0260F 2.937"

  • Fairfield, Iowa, United States
  • Jun 8th
NEW SURPLUS KOMET ABS50 x 15/16" INSERT DRILL ABS 50 x .937 KUB02/.937/1.874-R38

NEW SURPLUS KOMET ABS50 x 15/16" INSERT DRILL ABS 50 x .937 KUB02/.937/1.874-R38

  • Fairfield, Iowa, United States
  • Jun 8th

People who viewed this item also vieved

CHICAGO LATROBE 49708 1/8" x 5-1/8" HSS Oxide Taper Length Drill USA QTY 11 H19

CHICAGO LATROBE 49708 1/8" x 5-1/8" HSS Oxide Taper Length Drill USA QTY 11 H19

  • Saint Louis, Missouri, United States
  • Jan 30th
CLEVELAND C08746 Type 2510 1/4" x 6-1/4" HSS Oxide Taper Length Drill QTY 10 H18

CLEVELAND C08746 Type 2510 1/4" x 6-1/4" HSS Oxide Taper Length Drill QTY 10 H18

  • Saint Louis, Missouri, United States
  • Jan 30th
NEW CHICAGO LATROBE 3/16" x 12" DRILL BIT BLACK OXIDE 118° K NOTCH HD #50723 D2

NEW CHICAGO LATROBE 3/16" x 12" DRILL BIT BLACK OXIDE 118° K NOTCH HD #50723 D2

  • Oceanside, California, United States
  • Jan 30th
HD Cobolt gold finish 15 high speed twist drills

HD Cobolt gold finish 15 high speed twist drills

  • Charleston, West Virginia, United States
  • Jan 30th
New 35/64 (.5469) reduced shank (1/2) drill bit black oxide coating

New 35/64 (.5469) reduced shank (1/2) drill bit black oxide coating

  • United States
  • Jan 30th
New 5/8 (.625 )reduced shank ( 1/2) Drill Bit

New 5/8 (.625 )reduced shank ( 1/2) Drill Bit

  • United States
  • Jan 30th
"Cle-Forge"Reduced Shank Twist Drill Bit 1-1/8" ( REGROUND TIP)

"Cle-Forge"Reduced Shank Twist Drill Bit 1-1/8" ( REGROUND TIP)

  • Coventry, Rhode Island, United States
  • Jan 30th
49/64" T.A Spade Drill HSS Insert 131T-.765 Tin Coated

49/64" T.A Spade Drill HSS Insert 131T-.765 Tin Coated

  • Houston, Texas, United States
  • Jan 30th
Reduced Shank Twist Drill Bit 59/64"

Reduced Shank Twist Drill Bit 59/64"

  • Coventry, Rhode Island, United States
  • Jan 30th
Screw Machine Drills 8.4mm HSS Oxide 135D 37mm LOC x 79mm OAL QTY 5 <1707>

Screw Machine Drills 8.4mm HSS Oxide 135D 37mm LOC x 79mm OAL QTY 5 <1707>

  • Saint Louis, Missouri, United States
  • Jan 30th
GREENFIELD Screw Machine Drill Bits 15/32&#034; 135 Deg HSS Oxide Qty 6 [1711]

GREENFIELD Screw Machine Drill Bits 15/32" 135 Deg HSS Oxide Qty 6 [1711]

  • Saint Louis, Missouri, United States
  • Jan 30th
PRECISION Screw Machine Length Drill Bit 53/64&#034; 118 Deg HSS Oxide R40 USA [1700]

PRECISION Screw Machine Length Drill Bit 53/64" 118 Deg HSS Oxide R40 USA [1700]

  • Saint Louis, Missouri, United States
  • Jan 30th
9.40MM SANDVIK Carbide Drill 2F R840-0940-50-A1A 1220

9.40MM SANDVIK Carbide Drill 2F R840-0940-50-A1A 1220

  • Windsor, Connecticut, United States
  • Jan 30th
12MM GUHRING Carbide Coolant Drill 2FL

12MM GUHRING Carbide Coolant Drill 2FL

  • Windsor, Connecticut, United States
  • Jan 30th
3/4&#034; Carbide tipped precision drill bit MT 2 10&#034; OAL 5&#034; flute

3/4" Carbide tipped precision drill bit MT 2 10" OAL 5" flute

  • Punta Gorda, Florida, United States
  • Jan 30th
Morse Cutting Tools 412 5/16&#034; Twist Drill Bit USA

Morse Cutting Tools 412 5/16" Twist Drill Bit USA

  • Verona, Wisconsin, United States
  • Jan 30th
1-17/32&#034; 5MT Taper Shank Drill HSS 9-3/8&#034; Flute 16-3/8&#034; OAL USA NEW |13B|

1-17/32" 5MT Taper Shank Drill HSS 9-3/8" Flute 16-3/8" OAL USA NEW |13B|

  • Saint Louis, Missouri, United States
  • Jan 30th
4 ASSORTED HSS DRILLS w/ 2MT SHANKS - 37/64&#034;, 39/64&#034;, 5/8&#034;, 21/32&#034;

4 ASSORTED HSS DRILLS w/ 2MT SHANKS - 37/64", 39/64", 5/8", 21/32"

  • Covina, California, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies