US $48.50
Condition: |
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is
applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details.
...
|
Model | TAP SPIRAL FLUTE |
Country/Region of Manufacture | Japan | ||
Brand | SOWA | ||
Country of Manufacture | JAPAN |
Directions
Similar products from Other Threading Taps
MACHINIST TOOLS LATHE MILL Machinist Lot of Threading Taps for Tapping Thread
MACHINIST TOOLS LATHE MILL Machinist Lot of Threading Taps for Tapping Thread n
GREENFIELD M 3.5 X .6 X 1" DIAMETER HSS DIE MACHINIST TOOLS TOOLING TAPS
LOT 7 PIPE TAPS VERMONT 1 1/2 GTD 1" LH & RH 1/8 NPT PIPE TAP MACHINIST
NOS Ezy Out Screw Extractor SIZE #9~15/16" x 4 9/16"~Cleveland Twist Drill Co~
Sandvik Coromant C-8 collets and nuts. 60lbs
NEW Greenlee DTAP10-24 Combination Drill and Tap Bit, 10-24NC
NEW 22mm X .75 Metric Right Hand Thread Die M22 X 0.75mm Pitch
NEW 1/2-28 Bottom Tap Right Hand Thread 1/2"-28 TPI High Speed Steel Bttoming
NEW Walton 45038 3/8" Style A Tap Extensions
NEW Whitney Tool 96119 ANSI Standard Tap Extension, 5" OAL, 9-Piece Set
NEW Forney 21014 Bottom Tap Industrial Pro HSS UNF, 5/16-Inch by 24-Inch
NEW Forney 21009 Bottom Tap Industrial Pro HSS UNF, 6-Inch by 40-Inch
Starrett 91A Tap Wrench, 1/16" - 1/4" Tap Size, 3/32" - 5/32" Square Shank
Starrett 91B Tap Wrench, 3/16" - 1/2" Tap Size, 5/32" - 9/32" Square Shank
People who viewed this item also vieved
1 lot of 2 - Champion 5/16-18 NC H3 4FL HS Bottom Tap pt# 308-5/16-18-B (#995)
1 lot of 6 - Union Butterfield 6-32 NC HS Spiral pt plug tap pt# 1010820 (#1275)
Union Butterfield 3/4-16 -1500 Taper Chamfer -Straight pt# 1010146 (#565)
1 lot 12 - Champion 10-32 NF H3 4FL HS Bottom Tap pt# 308-10-32-B (#981)
Irwin 5/8-11 1-1/4 Die pt# 7252 (#760)
Vintage GTD Greenfield Tap and Die Set No. 328 in Wooden Box
HY - PRO 1 1/4" - 8 NC HSS CG GH5 HAND TAP
3 NEW MORSE USA 5/8 - 18 NF HS GH3 HAND TAPS - selling as a set
S.A.E. Tap & Die Set 40 Piece Carbon Steel In Great Condition
**NEW** M72-2.0 WIDELL-USA Hex Die HSS M72 2 m72-2
RIDGID 1 1/4" NPT PIPE TAP WITH BOX
ACE Made in USA 1/2NPT-14, 1/2" NPT-14, Taper Pipe Tap ****NEW****
1/4" - 18 NPT Pipe Tap HSS TiN Coated 4 Flute Short Projection NEW
WIDIA GTD Pipe Tap 1/2-14 5FL HSS NPTF 3-1/8" OAL 16110 USA <1894>
1/4" - 18 NPT Pipe Tap HSS TiN Coated NEW
Dormer E029, 3/8"-16 form tap with oil grooves EDP#581889
Dormer E006, 3 Flute, M12-1.75 Powdered Metal Spiral Point Tap, Black
(#4631C) Used Machinist 1 x 8 Spiral Point Plug Style Tap
(#4630C) New Machinist USA Made 1 x 8 Spiral Point Plug Style Tap
(#4626C) Used Machinist 7/8 x 9 Spiral Point Plug Style Tap
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies